Download Morphy Richards Elipta

43941 rev4.qxp_Layout 1 16/12/2014 15:25 Page 5
Using your kettle
1
Fill the kettle with water through either the
Spout (2) or Lid (1).
Do not fill past the MAX line.
2
Place the kettle on the Cordless Base (6) and
press the On/Off Switch (5). The Water Gauge
(4) will illuminate.
4
3
When boiled, the kettle will automatically
switch off. Remove from the Cordless Base.
Before first use
Pour the water from the kettle.
CAUTION: Will be hot
Removing the Filter
Before using the appliance for the first time, fill
with water, boil and pour away.
1. Open the Lid (1).
2. Lift the Filter (8) upwards from its holder.
3. To refit the Filter, slide it into the side wall guides
of the filter holder until it clicks into place.
WARNING: Unless the filter is fitted correctly,
the kettle lid may not close and lock securely.
Never operate the kettle without a Filter.
3