Download DELL Latitude E5550

Installing the LED Board
1.
Insert the LED board into its slot on the palmrest.
2.
Tighten the screw that secures the LED board to the palmrest.
3.
Connect the LED-board cable to its connector on the LED board.
4.
Install the:
a.
b.
c.
d.
e.
5.
palmrest
keyboard
keyboard trim
battery
base cover
Follow the procedures in After Working Inside Your Computer.
Removing the Power-Connector Port
1.
Follow the procedures in Before Working Inside Your Computer.
2.
Remove the:
a. base cover
b. battery
3.
22
Disconnect the power-connector port cable from the system board [1] and release the powerconnector port cable from its routing channels [2].