Download DELL Latitude E5550

5.
Push the palmrest to release and remove the palmrest from the computer [2].
Installing the Palmrest
1.
Place the palmrest on the computer.
2.
Connect the following cables to their connectors on the system board:
a.
b.
c.
d.
power board
LED board
USH board
touchpad board
3.
Tighten the screws at the front and back of the computer to secure the palmrest.
4.
Install the:
a.
b.
c.
d.
5.
keyboard
keyboard trim
battery
base cover
Follow the procedures in After Working Inside Your Computer
Removing the Power-Switch Board
1.
Follow the procedures in Before Working Inside Your Computer.
2.
Remove the:
a.
b.
c.
d.
e.
3.
base cover
battery
keyboard trim
keyboard
palmrest
Perform the following steps to remove the power-switch board from the palmrest:
a. Remove the screws that secure the power-switch board to the palmrest [1].
b. Remove the power-switch board from the palmrest [2].
16