Download Supermicro X10DRH-I

Chapter 1: Overview
Motherboard Features
CPU
• Dual
Intel® E5-2600 v3 Series processors (Socket
R3-LGA 2011); each processor supports dual fullwidth Intel QuickPath Interconnect (QPI) links (of up
to 9.6 GT/s one direction per QPI)
Note: Both CPUs need to be installed for full
access to the PCI-E slots, DIMM slots, and onboard controllers. Refer to the block diagram on
page 1-10 to determine which slots or devices
may be affected.
Memory
• Integrated memory controller supports up to 1024 GB
of Load Reduced (LRDIMM) or 512 GB of Registered
(RDIMM) DDR4 (288-pin) ECC 2133/1866/1600 MHz
modules in 16 slots
Note 1: Memory speed support depends on the
processors used in the system.
Note 2: For the latest CPU/memory updates,
please refer to our website at http://www.supermicro.com/products/motherboard.
DIMM Sizes
Chipset
Expansion
Slots
Graphics
Network
• DIMM
Up to 64GB at 1.2V
• Intel® PCH C612
• Six (6) PCI Express 3.0 x8 slots (CPU1 Slot1-Slot3,
CPU2 Slot5-Slot7)
• One (1) PCI-Express 3.0 x16 slot (CPU2 Slot4)
• Graphics controller via ASpeed 2400 BMC
• Intel® i350 Gigabit (10/100/1000 Mb/s) Ethernet Controller for LAN 1/LAN 2 ports (X10DRH-C/i)
• Intel®
X540 10-Gigabit (T) Ethernet Controller for
LAN 1/LAN 2 ports (X10DRH-CT/iT)
• ASpeed AST 2400 Baseboard Controller (BMC) supports IPMI 2.0
I/O Devices
SATA/SAS Connections
• SATA 3.0
Six (6) SATA 3.0 ports supported
by Intel PCH (I-SATA 0-5)
One (1) SATA 3.0 vertical connector with 4 connections supported by the SCU (S-SATA,
JS39)
1-7