Download Creative Labs Sound Blaster E3
Transcript
Setting Up Your Audio Device Step 1: Charging your Sound Blaster E3 Connect your Sound Blaster E3 directly to a USB port on your computer. Charge your Sound Blaster E3 for approximately 3 to 4 hours. It is recommended that you charge it for at least 8 hours before it is used for the first time. Note: Lithium polymer battery life may suffer when it is constantly fully depleted or overexerted at low voltage. It is a good practice to keep the battery well charged. Step 2: Turning On Sound Blaster E3 Press and hold the Power / Bluetooth button for 1 second to turn on Sound Blaster E3. l Power On – Press and hold 1 sec l Bluetooth pairing – Press and hold 2 sec l Power Off – Press and hold 4 sec Sound Blaster E3 – Setting Up Your Audio Device 5