Transcript
Step 6: Before putting the net on the frame, secure part (2), “Infinite Adjustment” system by screwing onto pole counter clockwise. To attach net part (11) to frame, spread out net and find red tabs attached to net. The red tabs indicate the corners of the net. To attach net, start with one corner and attach with one bungee, then attach the other three corners. Next, start at the top of the frame and attach the bungees across the top spreading them evenly. Attach the bungees on one side spreading them evenly. Repeat on bottom and then on final side. DELUXE 2 in 1 Throwing & Pitching Combo Set Item #2719 Use extreme caution when assembling the net to the frame. The bungees will be under extreme tension and must be attached carefully. Adult assembly is strongly recommended. Note: To fold flat for easy storage, depress push pins on part (6) and release support arm. Unit will now fold flat. Step 7: To attach bungees to net hold plastic ball in place and wrap free end around net and side tube. Loop free bungee around plastic ball. Step 9: Attach catcher target, part (13), to bunees on other side of return. Place bungee hooks into metal holes around the outside of target screen. ISO 4/08 Step 8: Attach target ribbon part (12) by weaving through net and tying off at ends. Step 10: Attach collection bag, part (14), to clips on front of catcher target. Note: Do not extend “Infinite Angle” adjustment system beyond red indicator mark on tube. Step 11: To draw back target, attach back straps to the back brace pole. Return Trainer Pitch Target For Replacement Parts Call 1-800-225-8649 MA Residents Call 1-781-341-5178 FRANKLIN SPORTS INC. Stoughton, MA 02072 www.franklinsports.com TOOLS REQUIRED: FLAT OR PHILLIPS SCREWDRIVER