Download Samsung RF24HSESBSR

Sparkling Water: Operational Notes
CAUTION
• Be sure to use genuine SodaStream Cylinders
from authorized resellers.
1. Press the Sparkling Water button for three
seconds to turn off the Sparkling Water
function.
2. Empty the Sparkling Water tank by dispensing
all the water in the tank.
3. Remove the SodaStream Carbonator
operating
• The refrigerator starts making sparkling water
about 10 seconds after you turn on the
Sparkling Water Production function.
• If you open the refrigerator door while the
refrigerator is making sparkling water, it will
stop. When you close the door, it will resume
making sparkling water in about a minute.
• If there is a power interruption when the
refrigerator is making sparkling water, the
refrigerator may re-start the carbonation
process when power returns and put too
much carbonation into the water.
If this occurs, we recommend throwing out
the overly carbonated water and starting the
process again.
• If you keep dispensing sparkling water, the
water stream may become unstable or break
up.
This is caused by changes in pressure in the
Sparkling Water Tank. It is not a defect.
• If the water hose is kinked or water is not
supplied properly, the Carbonation Level of the
Sparkling Water will be high.
This occurs because the the same amount of
the carbon dioxide (CO2) is dispensed by the
Cylinder regardless of the amount of water in
the Production Tank.
• The useful life of a SodaStream carbonator will
vary, depending on the level of carbonation
you select.
• If the Sparkling Water function is on and you
dispense about 1.1 L of sparkling water, the
refrigerator automatically begins making more
sparkling water.
• If you are not going to be home for a long
period of time, do not want to use the
Sparkling Water function any more, or you are
moving :
• Please remove the SodaStream
Carbonator from the compartment
located in the left door of the refrigerator
before you transport the refrigerator.
English - 53
DA68-03022B (EN)-03.indd 53
14. 5. 15. �� 3:44