Download Prestigio GeoVision 5050 iGo
Transcript
manufacturer or authorized unit. substitutions and modifications of the product without authorization from the The manufacturer should not hold responsibility for the damage caused by any user-serviceable parts inside. Refer servicing to qualified service personnel. To reduce the risk of electric shock, do not remove the cover (or back). No overheating. sunlight or heat. Maintain well-ventilated conditions around the unit to avoid To prevent the GPS from being damaged, be sure to keep the GPS out of direct liquids should be placed on the device. The device should not be exposed to dripping or splashing and no objects filled with WARNING 2. 1. CAUTION The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safety Instructions ITEM Accessories List Stylus Pen USB Cable Warranty Card User Manual 1 1 1 1 1 1 1 Car Charger Mounting Cradle QTY NAME Driver/Documentation CD Accessories EN - 1 EN EN 9. 8. 7. 6. 5. 4. 3. 2. 1. LCD Touch Screen 1 9 8 6 5 4 3 To insert a microSD card, place of the slot. the safety lock and pull the card out press the edge of the card to release To remove a microSD card, gently device. label towards the front side of the connector towards device and card Insert USB connector into the appropriate USB port. Insert the other USB connector into USB port on PC to start charging. z z Used for writing on the LCD Touch Screen. Stylus Pen Emits sound, voice or music. Speaker Press to power ON/OFF device. Power Button Used to reset the device. Reset Button the speaker will be turned off automatically. Connecting to External USB Device Flip open the protective rubber cover towards the front of the device. z 1. card before extraction. Connect an earphone for private listening. When an earphone jack is plugged in, Headphone Port Connects to USB Cable for data access or battery charging Mini-USB Port video. Insert the SD card into the slot. Used for Mapping Data or user’s music, photo or microSD Slot Please always make sure that no application is accessing the microSD z z color when charging. Charging Inserting microSD Card NOTE: 7 Device Connection The indicator glows in bright amber color when battery is fully charged and in red Battery Status Indicator Tap the screen with a finger to select commands or use the included stylus. EN - 2 2 Front and Side View View of Main Unit color when charging and turns bright amber color when charging is complete. Charging time is approximately 2 hours. charging. Flip open the protective rubber cover towards the front of the device. Insert earphone plug (not included) into the appropriate earphone port to switch z the volume to a comfortable level. down the volume before connecting the earphone and gradually turn up Excessively loud volume is potentially detrimental to hearing. Please turn NOTE: audio output from device speaker to earphone. z Connecting to Earphones vehicle engine is started to protect the device from sudden surges in current. Please connect the car charger to vehicle 12V accessory/cigarette socket after NOTE: battery (for at least 8 hours) before initial use. The battery status indicator glows in red Insert car charger connector into vehicle 12V accessory/cigarette socket to start It is not necessary to start charging the device before the battery is fully discharged. z EN - 3 Device with new batteriey should be fully charged before initial use. z Working conditions and precautions for the rechargeable battery The device is equipped with a built-in rechargeable battery. Please fully charge the Insert USB connector into the appropriate USB port. z About Rechargeable Battery z Connecting to Car Charger Flip open the protective rubber cover towards the left side of the device. 2. Cautions on Battery Charging z Device Connection EN EN reception. Place device on the bracket with device to enter sleep mode. Lift the suction cup lever to easily remove the suction cup from windshield or EN - 4 dashboard. Push the tap on top of the mounting cradle to release the device. 2. desired viewing angle. Rotate the knob to adjust device to surface. secure the mounting cradle on the Press down the suction cup lever to the suction cup at desired location. Lift the suction cup lever and press to turn off the device or to allow 4. Press and hold Power Button navigate various functions. with touch pen included to 3. Tap the corresponding buttons displayed. is shown, the main menu will be 2. Shortly after the startup screen to turn on device. 1. Press and hold Power Button Push on the top edge to securely Getting Started install device onto the cradle. socket. bottom positioned on the appropriate 1. z z z z z Please also make sure that the device has a clear view of sky to attain best GPS mounting cradle will not obstruct driver field of vision. Select an appropriate location on windshield or dashboard where the device and To Dismount Device 2. 1. mounting cradle included. Please follow procedures below to operate mounting cradle: The device can be securely mounted on vehicle dashboard or windshield with the Device Mounting Procedures Using Mounting Simple mode: you have easy access to the most important navigation covers actions in Simple mode. the User Manual To switch from Simple mode to Advanced mode: on the startup screen See (Navigation Menu), tap , . (Navigation Menu), tap , . • To switch from Advanced mode to Simple mode: on the startup screen • Later you can switch between the two operating modes: for detailed instructions on both modes. Guide GeoVision. Advanced mode: you have access to the full functionality of Prestigio that are optimal for typical use. functions and the basic settings only. The rest of the settings are set to values This • • are the same. structure and the number of available features. The controls and screen layouts The two operating modes of Prestigio GeoVision mainly differ in the menu start the program in Simple mode or in Advanced mode. When Prestigio GeoVision is started the first time, you need to select whether to GPS Tap Tap • Tap Tap Tap Tap Tap • • • • • • to stop navigation, and exit Prestigio GeoVision. to customise the way Prestigio GeoVision works. to navigate or to browse the map. for the list of your favourite destinations. to select one of the stored Points of Interest. for the list of recent destinations. to specify an address as your destination. The Navigation menu contains the following options: reach all parts of Prestigio GeoVision. EN - 5 After selecting Simple mode, the Navigation menu appears. From here you can Navigation Menu EN EN • • 4. EN - 6 • • Tap to finish entering the address. navigating. Pick the settlement from the list. The map appears with the selected point in the middle. Tap 3. Enter the house number on the keyboard. . Tap 1. 2. from the to open the list of results before it appears Pick the street from the list. Enter automatically. Tap string appear in a list. After entering a couple of characters, the names that match the Get to the list of results: Cursor menu. The route is then automatically calculated, and you can start to open the list of results before it appears • • . Start entering the street name on the keyboard. Tap the house number: 4. 3. 2. 1. Enter the street name: Navigation automatically. Tap After entering a couple of characters, the names that match the string appear in a list. Get to the list of search results: 3. . Start entering the settlement name on the keyboard. changed the country/state, tap Tap the button with the name of the settlement, or if you have 2. 1. To enter a new settlement: button. To select the settlement from the list of recently used ones, tap the different one from the list.If needed, change the settlement: you are. If needed, tap the button with the name of the country/state, and select a By default, Prestigio GeoVision proposes the country/state and settlement where In the Navigation menu, tap Navigation . to return to the Navigation menu. • • searched around the current GPS : The POI will be searched not around a given point but by : The POI will be searched around the destination of the be appear. upcoming petrol stations or restaurants.After this, the list of POI categories search for a later stopover that causes only a minimal detour. For example the size of the detour it means from the active route. This can be useful if you active route. position. will : • POI : The POI will be searched around the Cursor. • The : The POI will be searched around a given address. • Select the area around which the POI should be searched: In the Navigation menu, tap On the Map screen, tap Navigation To find the POI by its name, tap without entering any letters of its name. To list all POIs in a given POI group, press enter a part of the name. , and then , and use the keyboard to Select the POI group (e.g. Accomodation), and after that, if needed, select the POI subgroup (e.g. Hotel or Motel). or button. from the navigating. EN - 7 Cursor menu. The route is then automatically calculated, and you can start The map appears with the selected point in the middle. Tap Tap the desired POI in the list. the [optional] When finally the list of results appear, you can change the list order with • • • You can narrow the search with the following: Navigation EN EN you have moved the map, a EN - 8 move the map back to the current GPS position. If : Opens the Navigation menu. button appears. Tap this button to : Switches between 2D (classic top-down view) and 3D (perspective view for navigation) map modes. or a few seconds (right screenshot). Most parts of the screen behave as buttons. screenshot), but when you tap the map, additional buttons and controls appear for During navigation, the screen shows route information and trip data (left navigate. Their functions are explained in detail in the User Manual. There are several screen buttons and data fields on the screen to help you route. represents your current position, and the green line shows the recommended Map screen. The map looks similar to a conventional road-map. The blue arrow The most important and most often used screen of Prestigio GeoVision is the Map Screen The unit can’t receive satellite signals or can’t orient. There is no picture. There is no sound. Users can’t turn on the unit. PROBLEM The unit may be obstructed by buildings or metal block. The brightness may be turned down. The volume may be turned down or mute. The built-in rechargeable battery is weak. The adaptor doesn’t connect well. POSSIBLE CAUSE Make sure to use the unit out of room; if in the vehicle, you can use the external GPS antenna to solve this problem. Adjust the brightness of the LCD. Turn up the volume or turn on the sound output. Use the adaptor to supply power or charge the battery. Connect the adaptor correctly. POSSIBLE SOLUTION authorized professionals for it may damage the unit. device is not working properly. Never try to repair the unit without Immediately turn off the device and disconnect the power adapter if the NOTE: customer service. Take steps described in the tables below to solve simple problems before contacting Troubleshooting The unit can receive signals now but can’t then; signals received are not stable. PROBLEM Remove the veil. The built-in rechargeable battery is weak. The unit may be obstructed by veil, such as heat insulation paper. Avoid great swing of the unit. Use the adaptor to supply power or charge the battery. Swing of the unit is too great. POSSIBLE SOLUTION POSSIBLE CAUSE Troubleshooting Please refer to its user manual for more detailed instructions. ownload.mspx). EN - 9 (http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-d Microsoft Mobile Device Center® software for operating system Microsoft Vista and/or nload.mspx) (http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/activesync-dow versions Microsoft Active Sync® software for operating system Microsoft XP or earlier website to install: setup file included in the Driver/Documentation CD or download the file from Microsoft To establish connection with PC for data access and synchronization, please execute PC Connection EN EN USB USB Interface Display size Microsoft Window CE6.0 1w 8ohm built-in speaker AVI,WMV,3GP, MOV,MP4,MPG Microsoft Window CE6.0 1w 8ohm built-in speaker AVI,WMV,3GP, MOV,MP4,MPG Operating System Speaker Video formats supported EN - 10 type/capacity Li-polymer 1050mAh 8GB 8GB Li-polymer 950mAh Battery Expansion slot 4GB Micro SD-Card slot, max Flash 4GB 128MB, DDR2 128MB, DDR2 Micro SD-Card slot, max TFT Touch screen TFT Touch screen Display type RAM Resolution 5” Internal Internal Antenna 272*480 64 64 4.3" MSB2521A, ARM9 500MHz MSB2521A, ARM9 500MHz Channels GPS Chipset 480*272 GV5050 NavNgo iGo 8.3 GV4050 Navigation Software NavNgo iGo 8.3 MODEL Technical specifications Disclaimer non-condensing 10% to 90% 0~ 60ºC 2.5mm mini jack MP3,WMA GV4050 non-condensing 10% to 90% 0~ 60ºC 2.5mm mini jack MP3,WMA GV5050 Guide. slightly different appearance or modified functionality than presented in this Quick start As the Prestigio products are constantly updated and improved, your device may have a humidity Operating Temperature Operating Earphone jack supported Audio formats MODEL Technical specifications