Transcript
G E M I N I P L AY 2 G O QUICK SETUP B ox c o n tai n s t h e f o l l o w i n g : • PLAY2GO Portable PA • (1) Microphone + cable • (1) Power Cable 1. Place the PLAY2GO in the desired location for operation and plug it into a power source or verify the battery is fully charged for cord free operation. 2. Turn the volume levels on the PLAY2GO down prior to turning the unit on or connecting any input sources. 3. Power On the PLAY2GO. 4. Connect any audio input sources by referencing the setup diagram: • • • • • Bluetooth – Press the Bluetooth button for 3 seconds and the blue led will blink and several beeps will be heard as it locates another device to connect with. Then consult your device’s operating instructions for finding and connecting to another Bluetooth device. USB – Plug your USB Memory Stick into the correct input and use the controls on the MP3 Player to find and play tracks SD - Plug your SD Card into the correct input and use the controls on the MP3 Player to find and play tracks Microphone Inputs – Connect a 1/4” Microphone cable to the input. AUX Input – Stereo RCA or Stereo RCA to 1/8” cords can be used to connect an external MP3 player or another device. 5. Begin playback on desired device (Begin with the volume low in order to find the ideal level settings on the PLAY2GO and your input source). 6. Turn the volume on the PLAY2GO inputs and master volume up to the desired level. Microphone Volume Aux Input Volume Master Volume MP3 Player Controls: Volume +/- , Play/Pause, Track Search, Mode SD/USB Input Mic 1 & 2 Input: Connect a microphone or instrument via 1/4” cable Aux Input: Connect an RCA input Bluetooth Enable Battery Indicator Power Connector/ Switch W W W. G E M I N I S O U N D . C O M Q U I C K S TA R T G U I D E
