Download Lenovo ThinkPad E520
Transcript
Table 6. Startup menu items (continued) Menu item Selection Comments Boot Mode • Quick Screen during POST: • Diagnostics • Quick: ThinkPad Logo screen is displayed. Note: You can also enter the “Diagnostic” mode by pressing Esc during POST. • Diagnostics: Test messages are displayed. Beep at POST completion: • Quick: No. Sound on error case only. • Diagnostics: Yes. Always sounds. “Ctrl-S” prompt for on-board Ethernet: • Quick: No. • Diagnostics: Yes. Memory testing during POST: • Quick: Quick test (or no test). • Diagnostics: Full test. Testing other devices during POST: • Quick: Minimum test (or no test). • Diagnostics: Can perform necessary testing for critical devices. Option Keys Display • Disabled • Enabled Boot Device List F12 Option • Disabled • Enabled Boot Order Lock • Disabled • Enabled If you select “Disabled”, then “To interrupt normal startup, press Enter” message is not displayed during POST. If you select “Enabled”, the F12 key is recognized and the Boot Menu is displayed. If you select “Enabled”, the Boot Priority Order is locked for your future use. Updating your system UEFI BIOS The Unified Extensible Firmware Interface (UEFI) BIOS is a part of the system programs that make up the basic layer of software built into your computer. UEFI BIOS translates the instructions from other software layers. Your computer system board has a module called electrically erasable programmable read-only memory (EEPROM, also referred to as flash memory). You can update UEFI BIOS and the Configuration/ThinkPad Setup program by starting your computer with a flash update optical disc or flash update tool application running on the Windows environment. In some instances when you add software, hardware, or a device driver, you may be informed that you need to update your UEFI BIOS in order for the new addition to work properly. Chapter 8. Advanced configuration 123