Download Axis M1004-W
Transcript
AXIS M1004–W Network Camera System Options Use manually selected NAT router - Select this option to manually select a NAT router and enter the IP address for the router in the field. If no router is specified, the product automatically searches for NAT routers on your network. If more than one router is found, the default router is selected. Alternative HTTP port - Select this option to manually define an external HTTP port. Enter the port number in the field. If no port is entered here, a port number is automatically selected when NAT traversal is enabled. Note • An alternative HTTP port can be used or be active even if NAT traversal is disabled. This is useful if your NAT router does not support UPnP and you need to manually configure port forwarding in the NAT router. • If you attempt to manually enter a port that is already in use, another available port is automatically selected. • When the port is selected automatically it is displayed in this field. To change this, enter a new port number and click Save. FTP The FTP server running in the Axis product enables upload of new firmware, user applications, etc. The FTP server can be disabled under System Options > Network > TCP/IP > Advanced. Note This FTP server has nothing to do with the product’s ability to transfer images via FTP to other locations and servers. RTSP The RTSP server running in the Axis product allows a connecting client to start an H.264 stream. The RTSP port number can be changed under System Options > Network > TCP/IP > Advanced. The default port is 554. Note H.264 video streams will not be available if the RTSP server is disabled. Wireless Wireless Network Status To view a list of available wireless networks, go to System Options > Network > Wireless. The status of wireless networks list is the result of a network scan and provides the following information: • SSID is the name of a wireless network (or ad-hoc network). • Mode shows the type of network, which can be Master (an access point) or Ad-Hoc. • Security shows the type of security the network uses. • Channel shows the wireless channel currently in use. • Signal strength shows the quality, the strength, of the signal. • Bit rate shows the current bit rate in Mbit/s. This can only be shown for the access point currently in use. Click Refresh to perform a new scan. Access points with a disabled SSID Broadcast will not appear unless the Axis product is associated with it. Once the wireless connection is established, the network the Axis product is currently linked to is shown in blue. A network using unsupported security is shown in grey. 42