Download Bitdefender Internet Security 2013
Transcript
Bitdefender Internet Security 2013 3. In the Settings Overview window, select Firewall. 4. In the Firewall Settings window, select the Settings tab. 5. Turn on Paranoid Mode by clicking the corresponding switch. Note When Paranoid Mode is turned on, the Autopilot is automatically switched off. As long as Paranoid Mode is on, an alert will be displayed prompting you for action every time one of the following situations occurs: ● An application tries to connect to the Internet. ● An application tries to perform an action considered suspicious by the Intrusion Detection System or the Active Virus Control. The alert contains detailed information regarding the application and the detected behavior. You must select to Allow or Deny the action using the corresponding button. 19.6. Configuring advanced settings To configure advanced firewall settings, follow these steps: 1. Open the Bitdefender window. 2. Click the Settings button on the upper toolbar. 3. In the Settings Overview window, select Firewall. 4. In the Firewall Settings window, select the Advanced tab. 19.6.1. Intrusion Detection System To configure the Intrusion Detection System, follow these steps: 1. To turn on the Intrusion Detection System, click the corresponding switch. 2. Drag the slider along the scale to set the desired aggressiveness level. Use the description on the right side of the scale to choose the level that better fits your security needs. You can check what applications have been detected by the Intrusion Detection System in the Events window. If there are applications you trust and do not want the Intrusion Detection System to scan, you can add exclusion rules for them. To exclude an application from scanning, follow the steps described in section “Managing excluded processes” (p. 80). Firewall 110