Download Focus Electrics 72400

•
•
•
•
•
•
•
•
•
•
•
•
Longer extension cords are available, but care must be exercised in their use.
While use of an extension cord is not recommended, if you must use one, ensure
that the marked electrical rating of the extension cord is equal to or greater than
that of the appliance. If the plug is of the grounded type, the extension cord must be
a grounding-type 3-wire cord. To avoid pulling, tripping or entanglement, position
the extension cord so that it does not hang over the edge of the counter, table or
other area where it can be pulled on by children or tripped over unintentionally.
This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug is intended to fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
Do not use an outlet or extension cord if the plug fits loosely or if the outlet or
extension cord feels hot.
Do not use glass cover if chipped, cracked or has deep scratches. Weakened glass
can shatter during use. Discard immediately!
Glass is breakable. Care should be taken not to drop or impact the glass cover. If
the cover breaks, it will do so in many pieces. Avoid or discard any foodstuffs
exposed to broken cover.
Be extremely cautious of steam when removing cover. Lift cover slowly, directing
steam away from you.
Do not set hot cover on cold or wet surface; let cover cool before placing in water.
Sudden temperature change may cause the cover to crack or shatter.
Set cover on hot pad, trivet or other heat protective surface. Do not set hot cover
directly on the counter, table or other surface.
Do not place glass cover with metal ring in the microwave oven.
Do not set glass cover on stovetop burner or oven heat vent. Sudden temperature
changes may cause the cover to shatter.
This appliance is not intended for deep frying foods.
For household use only.
SAVE THESE INSTRUCTIONS
BEFORE USING FOR THE FIRST TIME
Wash the skillet and cover in hot soapy water; rinse thoroughly and dry, including the
terminal pins inside the socket of the skillet where the temperature control fits.
To ensure stick-free cooking, lightly wipe a teaspoon of cooking oil with paper toweling
or a soft cloth over the entire interior surface. Let the oil remain on the surface.
Handle
Lid
Gaskets
Washers
Screws
The hardware needed for attachment of the handle to the lid may be packed in a small
plastic bag or within the handle itself. For glass lids, align the handle with the hole in
the lid, and then secure with the screw assembly in the order shown above. DO NOT
overtighten.
English - 3