Download Dali IKON SUB MK2
Transcript
UK H) I) • J) DE DK FUSE compartment: If the subwoofer fails to power up when connected to the mains and the POWER switch is set to ON, the fuse may have blown or be faulty. Replace the fuse with the same type as originally supplied – see fuse type on the amplifier back plate. If the fuse blows repeatedly, have the subwoofer checked at an authorised service centre – contact your authorised dealer. MAINS connector: Connect the supplied power cord to the MAINS connector and your mains outlet. WARNING: MAKE SURE THAT CORRECT VOLTAGE IS SUPPLIED FROM YOUR MAINS OUTLET BEFORE CONNECTION. There are three settings for the POWER MODE switch: ON: The power to the subwoofer will be controlled by the POWER switch. AUTO: When the main power switch is on, the subwoofer amplifier will turn on when an input signal is detected on one of the inputs. When a signal is not detected for approximately 20 minutes, the subwoofer amplifier will go into standby-mode. OFF: The subwoofer will immediately go into standby mode. 10.0 THE LISTENING ROOM Every room has its own distinctive acoustics, which influence the way we experience sound from a speaker. The sound you hear consists of direct sound from the speakers and reflected sound from the floor, ceiling and walls. The latter will affect how you experience the sound. As a basic rule, try to avoid large, hard and reflective areas in the immediate vicinity of your loudspeakers as it will typically cause strong reflections, which might disturb the precision and spatial effect of the sound reproduction. Reflection might be suppressed by positioning e.g. a plant between the speaker and the reflecting surface. Soft items such as carpets, curtains etc. might help if the sound is too bright. Both the amount and quality of the deep bass depend on the size and shape of the room, and the position of the speakers. Positioning the speakers near a side or back wall will accentuate the bass. A corner location will accentuate it even more, but will also increase the reflections. 11.0 TECHNICAL SPECIFICATIONS In Table 2 you will find the most common specifications for our speakers. Please have in mind that there are countless methods for measuring speakers. However, none of them tell you anything useful about how a speaker really sounds. Only your ears can decide whether one speaker sounds better than another. Like all our speakers, DALI IKON MK2 series is designed to reproduce music as honestly as possible. Enjoy your new DALI IKON MK2! 17
This document in other languages
- Deutsch: Dali IKON 2 MK2
- dansk: Dali IKON 2 MK2