Download Fagor CFI-3GLSTABUT

1/ INSTALLING YOUR APPLIANCE
EN
• Gas
supplied by tank or
cylinder (butane/propane)
In an existing system, a flexible pipe fitted
with hose clips (compliant with the XP D 36110 standard) with a five year service life
guarantee can be used. In this case an
adaptor must be used and a sealing washer
must be inserted between the adaptor and
the hob’s elbow (Fig. 03).
For your safety, you can only choose from the
following 3 connection options:
— Connection with a rigid copper pipe with
screw-on mechanical connectors (G1/2 gas
standard mark). Connect directly to the end of
the elbow fitted on the appliance.
Tip
You can obtain the adaptor and the sealing
washer from your After-Sales Service
Department.
— Connection with a flexible metal hose
(stainless steel) with screw-on mechanical
connectors (compliant with standard
NF D 36 121) with lifetime service guarantee
(Fig. 01).
Warning
Do not exceed 25 N.m. torque when
tightening the adaptor.
— Connection with a reinforced rubber hose
with screw-on mechanical connectors
(compliant with the NF D 36-112 standard)
with 10 year service life guarantee (Fig. 02).
Q;@
Q;@
Fig. 01
A
Sealing washer (not provided)
B
Adaptor (not provided)
C
Hose clip (not provided)
Fig. 02
Fig. 03
A
B
C
Warning
All flexible pipes and hoses with a
limited service life must have a maximum
length of 2 meters and must be accessible
along their entire length. They must be
replaced before the end of their service life
(indicated on the pipe). Regardless of the
chosen connection type, use soapy water to
ensure that the connection is leaktight once
installation is complete.
In France, you must use a hose or a pipe
bearing the “NF Gaz” stamp
.
11