Download basicXL BXL-LINKLED10

Attention!
It is also possible to change the sequence of the individual modules as you see fit. First, unplug the
device from the power source and remove all the connections from the control unit. Then, carefully slide
the individual modules out of their slots and reassemble them as you wish.
7. Care
Before cleaning the unit, disconnect it from the other components; do not use harsh cleaning agents.
Use a clean cloth to wipe any dust or dirt from the product. We are not liable for damage arising from
incorrect handing, improper use or wear and tear. We reserve the right to make technical modifications.
8. Technical data
Linkable LED Lights:
Power adapter input:
Power adapter output:
Light bulbs:
BXL-LINKLED10:
BXL-LINKLED20:
220~230 V AC 50 Hz
14 V DC 300 mA
47 LEDs per module (Red, Blue, Yellow)
47 LEDs per module (Red, 2 x Blue, Yellow, Green, Orange)
Safety precautions:
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is required.
Disconnect the product from mains and other equipment if a
problem should occur. Do not expose the product to water or
moisture.
Avoid direct eye contact when product is turned on.
The BXL-LINKLEDs are very bright and may cause injury to eyes.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective
holders and are hereby recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products
should not be mixed with general household waste. There is a separate collections system for
these products.
3