Download Miele CVA 3660 coffee maker
Transcript
Warning and Safety instructions ~ Do not use milk with additives. Sugar additives would stick to the milk pipework and damage the coffee machine and the cappuccinatore. ~ Only use the descaling tablets supplied by Miele and follow the instructions on the packet carefully. Use the exact proportions recommended. Otherwise the machine will be damaged. ~ Never place a drink with ignited alcohol under the spout of the coffee machine. The flames could ignite plastic components and cause fire damage. ~ How quickly the capsule plate ~ Hot water and steam could cause scalding. Be very careful when using these functions. Make sure you do not come into contact with steam or hot water. The machine must not be used for cleaning objects. ~ Never swing from or hang anything ~ Always switch the coffee machine off with the master switch before cleaning the interior. Danger of injury. ~ Do not clean the inside of the capsule plate opening. Danger of inury. ~ Do not use a steam cleaner to clean this machine. Steam could reach the electrical components and cause a short circuit. becomes soiled will depend on the fat content of the coffee used. We recommend that you clean the capsule plate every 1 to 2 months with a cleaning tablet. on the machine front when it is open as this could damage the machine. ~ The machine is designed to be used in areas with an ambient temperature of +15 °C to +60 °C. Please do not use it anywhere with an ambient temperature outside this range. The manufacturer cannot be held liable for damage caused by non-compliance with these Warning and Safety instructions. ~ Clean the machine every day to prevent a build-up of bacteria. All parts except the capsule plate and the plastic grille are dishwasher safe. ~ Water in the drip tray can be very hot. Take great care when emptying it. Danger of scalding. ~ The machine should be descaled regularly, depending on the hardness of the water, with the descaling tablets supplied. The harder the water, the more often the machine must be descaled. The manufacturer cannot be held liable for damage arising from insufficient descaling. 11