Download Smeg SI3950B hob

Instructions for the installer
8.5 Hob seal
To prevent leakage of liquid between the frame of
the hob and the work surface, place the seal
provided along the entire outer edge of the hob
before assembly.
Do not fix the hob using silicon as this would make it impossible to remove the hob, if necessary, without
damaging it.
8.6 Fixing using brackets
Fix the hob to the unit using the appropriate brackets supplied.
To secure the hob correctly to the counter top, tighten the
brackets A in the appropriate holes on the sides of the casing.
Take care while securing with the brackets; if tightened too much the glass may be strained causing it to
crack.
48