Download Supermicro Processor Blade SBI-7427R-T3

SBI-7427R-T3 Blade Module User’s Manual
Memory Support
The SBI-7427R-T3 blade module supports up to 512 GB of RDIMM and 128 GB of
UDIMM DDR3 1600/1333/1066/800 MHz speed SDRAM in sixteen (16) 240-pin DIMM
sockets. See Section 3-5: Memory Installation on page 3-9 for further details on
mainboard memory installation.
Hard Disk Drives
The SBI-7427R-T3 blade unit accommodates up to three 2.5" SATA hard disk drives,
which are mounted in drive “trays”. The drives can be hot-swapped and removed or
replaced without powering down the blade unit they reside in. The three drives can be
used to set up a RAID array (RAID 0, 1, 5 and 10 Windows; RAID 0, 1 and 10 Linux) or
JBOD. These drives use a yellow color for the Blade HDD active LED. See Chapter 5:
"RAID Setup Procedure" on page 5-1 for further details on RAID Setup.
WARNING: To maintain proper airflow, both hard drive bays must have drive
carriers inserted during operation whether or not a drive is installed in the tray.
4-8