Download Metra Dash kit

Kit Assembly 99-7611
DDIN head unit provisions
1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Mount the radio housing brackets to
the sides of the double DIN radio using
screws supplied with the double DIN
radio. (Figure A)
3. Place the DDIN trim plate on the front of
the DDIN radio. (Figure B)
(Figure A)
4. Reassemble dash in reverse order
of disassembly.
(Figure B)
5