Download Benq SH960 data projector
Transcript
English System Setup menu Function Language Splash Screen Projector Position Auto Power Off Sleep Timer Background Color Description Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 22 for details. Allows you to select which logo screen will be displayed during projector startup. You can choose BenQ logo screen, Blue screen or Black screen. The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See "Choosing a location" on page 12 for details. Prevents unnecessary projection when no signal is detected for a long time. See "Setting Auto Power Off " on page 52 for details. Sets the auto-shutdown timer. The timer can be set to a value between 30 minutes and 3 hours. Allows you to choose the color of the background screen that will be displayed when there is no input source detected. Menu Display Time Sets the length of time the OSD will remain active after your last key press. The range is from 5 to 30 seconds in 5-second increments. Menu Settings Menu Position Sets the On-Screen Display (OSD) menu position. Reminder Message Input Source Quick Auto Search Sets whether to display the OSD messages about the status of detecting signals. Selects an input source to be projected. See "Selecting an input source" on page 21 for details. Sets whether the projector searches automatically for input sources. If the source scan is On, the projector will scan for input sources until it acquires a signal. If the function is not activated, the projector selects the last used input source. Closed Caption Enable Closed Caption Activates the function by selecting On when the selected input signal carries closed captions. • Captions: An on-screen display of the dialogue, narration, and sound effects of TV programs and videos that are closed captioned (usually marked as "CC" in TV listings). Caption Version Selects a preferred closed captioning mode. To view captions, select CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language in your area). These functions are only available when the Video or S-Video signal is selected. Standby Monitor Out Selecting On enables the function. The projector can output a VGA signal when it is in standby mode and the PC jack is correctly connected to devices. See "Connecting a monitor" on page 19 for how to make the connection. Enabling this function slightly increases the standby power consumption. 48 Using the projector