Download Benq SH910

Transcript
Description of each menu
•
The default values listed in this manual, especially on pages 64-72, are for reference only.
They may vary between the projectors due to the continuous improvement to the
products.
FUNCTION
Wall Color
Aspect Ratio
Auto
Keystone
Keystone
1. DISPLAY menu
Position
DESCRIPTION
Corrects the projected picture’s color when the projection surface is
not white. See "Using Wall Color" on page 32 for details.
There are four options to set the image's aspect ratio depending on
your input signal source. See "Selecting the aspect ratio" on page 29 for
details.
Auto corrects any keystoning of the image.
Corrects any keystoning of the image. See "Correcting keystone" on
page 24 for details.
Displays the position adjustment page. To move the projected image,
use the directional arrow keys. The values shown on the lower position
of the page change with every key press you made until they reach
their maximum or minimum.
This function is only available when a PC signal (analog RGB) is
selected.
Adjusts the clock phase to reduce image
distortion.
Phase
This function is only available when a PC
signal (analog RGB) is selected.
Adjusts the horizontal width of the image.
H. Size
Digital Zoom
PIP
Teaching
Template
64
Operation
This function is only available when a PC signal (analog RGB) is
selected.
Magnifies or reduces the projected image. See "Magnifying and
searching for details" on page 29 for details.
Turns the PIP window on or off and makes related adjustments. See
"Displaying more than one image source simultaneously" on page 37
for details.
Provides some templates as teaching aids. Teachers can use them for
teaching.