Download Philips BeNear CD1952B

Register your product and get support at
www.philips.com/welcome
CD190
CD195
User manual
Contents
1 Important safety instructions
3
2 Your phone
4
4
5
5
6
What is in the box
Overview of the phone
Overview of the base station
Display icons
3 Get started
7
Connect the base station
7
Install the handset
7
Configure your phone (country
dependent)8
Change the remote access PIN code
8
Charge the handset
9
Check the battery level
9
What is standby mode?
9
Check the signal strength
10
Switch the handset on or off
10
4Calls
Make a call
End a call
Answer a call
Mute the microphone
Adjust the earpiece/speaker volume
Make a second call
Answer a second call
Switch between two calls
Make a conference call with the
external callers
11
11
11
11
12
12
12
12
12
12
5 Text and numbers
14
14
6Phonebook
15
15
15
Enter text and numbers
View the phonebook
Search a record
Call from the phonebook
Access the phonebook during a call
Add a record
Edit a record
Delete a record
Delete all records
15
15
15
16
16
16
7 Call log
17
17
17
17
17
17
18
8 Redial list
19
19
19
19
19
19
9 Phone settings
20
20
20
20
20
10Services
22
22
22
22
22
22
23
23
24
11 Telephone answering machine
Turn the answering machine on or off
25
25
EN
1
Call list type
View the call records
Save a call record to the phonebook
Return a call
Delete a call record
Delete all call records
View the redial records
Redial a call
Save a call record to the phonebook
Delete a redial record
Delete all redial records
Sound settings
Name the handset
Set the date and time
Set the display language
Call list type
Auto conference
Network type
Select the recall duration
Dial mode
Register the handsets
Unregister the handsets
Restore default settings
Set the answering machine language
25
Set the answer mode
25
Announcements26
Incoming messages (ICM)
26
Set the ring delay
27
Remote access
27
12 Technical data
29
13Notice
30
Declaration of conformity
30
Use GAP standard compliance
30
Compliance with EMF
30
Disposal of your old product and
batteries30
14 Frequently asked questions
32
15Appendix
33
33
Text and number input tables
2
EN
1 Important safety
instructions
Power requirements
• This product requires an electrical supply
of 100-240 volts AC. In case of power
failure, the communication can be lost.
• The voltage on the network is classified
as TNV-3 (Telecommunication Network
Voltages), as defined in the standard EN
60950.
Warning
•• The Electrical network is classified as hazardous. The
only way to power down the charger is to unplug the
power supply from the electrical outlet. Ensure that the
electrical outlet is always easily accessible.
To avoid damage or malfunction
Caution
•• Use only the power supply listed in the user
•• Do not open the handset, base station or charger as
you could be exposed to high voltages.
•• For pluggable equipment, the socket-outlet shall
be installed near the equipment and shall be easily
accessible.
•• This equipment is not designed to make emergency
calls when the power fails. An alternative has to be
made available to allow emergency calls.
•• Do not allow the product to come into contact with
liquids.
•• Do not use any cleaning agents containing alcohol,
ammonia, benzene, or abrasives as these may harm
the set.
•• Do not expose the phone to excessive heat caused by
heating equipment or direct sunlight.
•• Do not drop your phone or allow objects to fall on
your phone.
•• Active mobile phones in the vicinity may cause
interference.
About operating and storage temperatures
• Operate in a place where temperature is
always between 0°C to +40°C (up to 90%
relative humidity).
• Store in a place where temperature is
always between -20°C and +45°C (up to
95% relative humidity).
• Battery life may be shorter in low
temperature conditions.
instructions.
•• Use only the batteries listed in the user instructions.
•• Risk of explosion if battery is replaced by an incorrect
type.
•• Dispose of used batteries according to the instructions.
•• Always use the cables provided with the product.
•• Do not allow the charging contacts or the battery to
come into contact with metal objects.
•• Do not let small metal objects come into contact with
the product. This can deteriorate audio quality and
damage the product.
•• Metallic objects may be retained if placed near or on
the handset receiver.
•• Do not use the product in places where there are
explosive hazards.
EN
3
2 Your phone
Congratulations on your purchase and welcome
to Philips!
To fully benefit from the support that Philips
offers, register your product at www.philips.
com/welcome.
Power adapter**
What is in the box
Line cord*
Guarantee
Base station (CD190)
4XLFNVWDUWJXLGH
Quick start guide
Base station (CD195)
Note
•• * In some countries, you have to connect the line
adapter to the line cord, then plug the line cord to the
telephone socket.
•• ** In multi-handset packs, there are additional handsets
and chargers and power adapters.
Handset**
Charger**
4
EN
Overview of the phone
a
n
m
b
c
d
i Microphone
j R
Recall key (This function is network
dependent.)
k *
Set the dial mode (pulse mode or
temporary tone mode).
l
e
l
k
j
i
f
g
h
a Earpiece
b Battery door
c
• Scroll up on the menu.
• Increase the earpiece/speaker volume.
• Access the phonebook.
d REDIAL/C
• Delete text or digits.
• Cancel operation.
• Access the redial list.
e
f
• Make and receive calls.
n MENU/OK
• Access the main menu.
• Confirm selection.
• Enter the options menu.
• Select the function displayed on the
handset screen directly above the key.
Overview of the base station
CD190
a
• End the call.
• Exit the menu/operation.
• Press and hold to switch the handset
on or off.
• Press to enter a space during text
editing.
• Press and hold to lock the keypad.
g #
• Make a predial call.
• Press and hold to enter a pause.
h
m
• Scroll down on the menu.
• Decrease the earpiece/speaker volume.
• Access the call log.
a
• Press to find handsets.
• Press and hold to enter the registration
mode.
Mute or unmute the microphone.
EN
5
CD195
Icon
a
b
c
d
e
h
g
a
f
• Press to find handsets
• Press and hold to enter the registration
mode
b Speaker
c
d
e
f
g
h
/
Decrease/increase the speaker volume.
Skip backward during playback.
Skip forward during playback.
Turn the answering machine on/off.
• Play messages.
• Stop messages playback.
• Delete the current playback message.
• Press and hold to delete all old
messages.
/
Display icons
In standby mode, the icons shown on the main
screen tell you what features are available on
your handset.
6
EN
Descriptions
When the handset is off the base
station/charger, the bars indicate the
battery level (from full to low).
When the handset is on the base
station/charger, the bars keep scrolling
until charging is complete.
The empty battery icon flashes and you
hear an alert tone.
The battery is low and needs recharging.
The number of bar indicates the link
status between the handset and base
station. The more bars are shown, the
better the signal or the connection is.
It remains steadily on when browsing
incoming calls in the call log.
It indicates an outgoing call in the redial
list.
It flashes when there is a new missed
call.
It remains steadily on when browsing the
missed calls in call log.
It flashes when receiving incoming call. It
remains steadily on during a call.
The ringer is off.
Answering machine: it flashes when
there is a new message. It displays when
the telephone answering machine is
turned on.
It flashes when there is a new voice
message.
It remains steadily on when the voice
messages are already viewed in the call
log.
The icon is not shown when there is no
voice message.
It is displayed when you scroll up/down a
list/increase and decrease the volume.
There are more digits on the right. Press
REDIAL/C to read.
3 Get started
Caution
•• Make sure that you have read the safety instructions in
the 'Important safety instruction' section before you
connect and install your handset.
Connect the base station
Warning
•• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the phone.
•• Use only the supplied power adapter to charge the
batteries.
3
Connect each end of the power adapter
to (for multi handset version only):
• the DC input jack at the bottom of the
extra handset charger.
• the power socket on the wall.
Note
•• If you subscribe to the digital subscriber line (DSL) high
speed internet service through your telephone line,
ensure you install a DSL filter between the telephone
line cord and the power socket.. The filter prevents
noise and caller ID problems caused by the DSL
interference. For more information on the DSL filters,
contact your DSL service provider.
•• The type plate is located on the bottom of the base
station.
1
2
Connect each end of the power adapter
to:
• the DC input jack at the bottom of the
base station;
• the power socket on the wall.
Connect each end of the line cord to:
• the telephone socket at the bottom of
the base station;
• the telephone socket on the wall.
Install the handset
The batteries are pre-installed in the handset.
Pull the battery tape off from the battery door
before charging.
EN
7
Note
•• The country/language setting option is country
dependent. If no welcome message is displayed, it
means the country/language setting is preset for your
country. Then you can set the date and time.
To re-set the language, see the following steps.
1
Caution
•• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•• Use only the supplied batteries.
•• Risk of decreased battery life! Never mix different
brands or types of batteries.
2
Select [MENU] > [PHONE SETUP] >
[LANGUAGE], then press MENU/OK to
confirm.
Select a language, then press MENU/OK
to confirm.
»» The setting is saved.
Set the date and time
Note
•• Charge the batteries for 8 hours before first use.
•• If the handset becomes warm when the batteries are
Tip
•• To set the date and time later, press REDIAL/C to skip
this setting.
being charged, it is normal.
Warning
•• Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may damage
the product.
1
2
3
The batteries are pre-installed in the handset.
Pull the battery tape off from the battery door
before charging.
4
Configure your phone
(country dependent)
5
1
2
When using your phone for the first time,
you see a welcome message.
Press MENU/OK.
Set the country/language
Select your country/language, then press
MENU/OK to confirm.
»» The country/language setting is saved.
8
EN
Press MENU/OK.
Select [PHONE SETUP] > [DATE/TIME],
then press MENU/OK to confirm.
Press the numeric buttons to enter the
date, then press MENU/OK to confirm.
»» The time setting menu is displayed on
the handset.
Press the numeric buttons to enter the
time.
• If the time is in 12-hour format, press
/ to select [AM] or [PM].
Press MENU/OK to confirm.
Change the remote access
PIN code
Note
•• The default answering machine remote access PIN
code is 0000 and it is important to change it to ensure
the security.
1
2
3
4
5
Press MENU/OK.
Select [ANSW MACHINE] > [REMOTE
ACC.] > [CHANGE PIN], then press
MENU/OK to confirm.
Check the battery level
Enter the old PIN, then press MENU/OK
to confirm.
Enter the new PIN code, then press
MENU/OK to confirm.
Enter the new PIN code again, then press
MENU/OK to confirm.
»» The setting is saved.
Charge the handset
Place the handset on the base station to
charge the handset. When the handset is
placed correctly on the base station, you hear a
docking sound.
»» The handset starts charging.
The battery icon displays the current battery
level.
When the handset is off the base
station/charger, the bars indicate
the battery level (full, medium and
low).
When the handset is on the base
station/charger, the bars flash until
charging completes.
The empty battery icon flashes.
The battery is low and needs
recharging.
Note
•• Charge the batteries for 8 hours before first use.
•• If the handset becomes warm when the batteries are
being charged, it is normal.
You can activate or deactivate the docking tone
(see 'Set the docking tone' on page 20).
Your phone is now ready to use.
The handset turns off if the batteries are empty.
If you are on the phone, you hear warning
tones when the batteries are almost empty. The
call gets disconnected after the warning.
What is standby mode?
Your phone is in standby mode when it is idle.
The standby screen displays the handset name
or date and time, and handset number.
Tip
•• Press and hold MENU/OK to switch between the
handset name and date and time display.
EN
9
Check the signal strength
The number of bars indicates the
link status between the handset
and base station. The more
bars are shown, the better the
connection is.
•
•
Make sure the handset is linked to the base
station before you make or receive calls
and carry out the phone functions and
features.
If you hear warning tones when you are
on the phone, the handset is almost out
of battery or the handset is out of range.
Charge the battery or move the handset
nearer to the base station.
Switch the handset on or off
Press and hold
off.
10
EN
to switch the handset on or
4Calls
2
Press
to dial out the call.
Call from the redial list
Note
•• When the power fails, the phone cannot access
You can make a call from the redial list (see
'Redial a call' on page 19).
emergency services.
Call from the phonebook
Tip
•• Check the signal strength before you make a call or
when you are in a call (see 'Check the signal strength'
on page 10).
Make a call
You can make a call in these ways:
• Quick call
• Dial before you call
• Redial the most recent number
• Call from the redial list.
• Call from the phonebook list
• Call from the call log
You can make a call from the phonebook list
(see 'Call from the phonebook' on page 15).
Call from the call log
You can return a call from the received or
missed call log (see 'Return a call' on page 17).
Note
•• The call timer displays the talk time of your current call.
Note
•• If you hear warning tones, the handset is almost out
of battery or the handset is out of range. Charge the
battery or move the handset nearer to the base station.
Quick call
1
2
Press
.
Dial the phone number.
»» The number is dialed out.
»» The duration of your current call is
displayed.
End a call
You can end a call in these ways:
• Press
; or
• Place the handset to the base station
or charging cradle.
Dial before you call
1
2
Dial the phone number
• To erase a digit, press REDIAL/C.
• To enter a pause, press and hold #.
Press
to dial out the call.
Redial the most recent number
1
Answer a call
When there is an incoming call, the phone rings.
Press
to answer the call.
Press REDIAL/C.
»» The redial list is displayed and the most
recent number is highlighted.
EN
11
Warning
•• When the handset rings or when the handsfree is
activated, keep the handset away from your ear to
avoid ear damage.
Note
•• The caller ID service is available if you have registered
to the caller ID service with your service provider.
Make a second call
Note
•• This service is network dependent.
1
2
Tip
Press R during a call.
»» The first call is put on hold.
Dial the second number.
»» The number displayed on the screen is
dialed out.
•• When there is a missed call, a notification message
appears.
Turn off the ringer for all incoming
calls
When the phone rings, press REDIAL/C.
Mute the microphone
1
2
Press during a call.
»» The handset displays [MUTE ON].
»» The caller cannot hear you, but you
can still hear his voice.
Press again to unmute the microphone.
»» You can now communicate with the
caller.
Answer a second call
Note
•• This service is network dependent.
When there is a periodical beep to notify you
of an incoming call, you can answer the call in
these ways:
1
2
Press / to adjust the volume during a call.
»» The earpiece/speaker volume is
adjusted and the phone is back to the
call screen.
Press R and to end the current call and
answer the first call.
Switch between two calls
1
Adjust the earpiece/speaker
volume
Press R and to answer the call.
»» The first call is put on hold, and you
are now connected to the second call.
Press R and .
»» The current call is put on hold, and you
are now connected to the other call.
Make a conference call with
the external callers
Note
•• This service is network dependent. Check with the
service provider for additional charges.
12
EN
When you are connected to two calls, press R,
then .
»» The two calls are combined and a
conference call is established.
EN
13
5 Text and
numbers
You can enter text and numbers for handset
name, phonebook records, and other menu
items.
Enter text and numbers
1
2
3
Press once or several times on the
alphanumeric key to enter the selected
character.
Press REDIAL/C to delete the character.
Press and to move the cursor left and
right.
Press
to add a space.
Tip
•• For further information on the text and number input,
see the chapter 'Appendix'.
14
EN
6Phonebook
This phone has a phonebook that stores up to
50 records. You can access the phonebook from
the handset. Each record can have a name up
to 12 characters long and a number up to 24
digits long.
There are 2 direct access memories (keys
and ). Depending on your country, keys
and are preset to the voice mail number and
information service number of your service
provider respectively. When you press and hold
on the key in standby mode , the saved phone
number is dialed automatically.
View the phonebook
Enter the first character of a contact
1
2
Press or press MENU/OK >
[PHONEBOOK] > [VIEW] to access the
phonebook list.
Press the alphanumerical key that matches
the character.
»» The first record that starts with this
character is displayed.
Call from the phonebook
1
2
3
Press or press MENU/OK >
[PHONEBOOK] > [VIEW] to access the
phonebook list.
Select a contact in the phonebook list.
Press
to make the call.
Note
•• You can view the phonebook on one handset only
each time.
1
2
Press or press MENU/OK >
[PHONEBOOK] > [VIEW] to access the
phonebook list.
Select a contact and view the available
information.
Search a record
You can search the phonebook records in these
ways:
• Scroll the contacts list.
• Enter the first character of the contact.
Scroll the contact list
1
2
Press or press MENU/OK >
[PHONEBOOK] > [VIEW] to access the
phonebook list.
Press and to scroll through the
phonebook list.
Access the phonebook during
a call
1
2
Press MENU/OK, select [PHONEBOOK]
then press MENU/OK again to confirm.
Select the contact, then press MENU/OK
to view the number.
Add a record
Note
•• If your phonebook memory is full, the handset displays
a notification message. Delete some records to add
new ones.
1
2
3
Press MENU/OK.
Select [PHONEBOOK] > [ADD NEW],
then press MENU/OK to confirm.
Enter the name, then press MENU/OK to
confirm.
EN
15
4
Enter the number, then press MENU/OK
to confirm
»» Your new record is saved.
4
»» The handset displays a confirmation
request.
Press MENU/OK to confirm.
»» The record is deleted.
Tip
•• Press and hold # to insert a pause.
Delete all records
Note
•• The phonebook overwrites the old number with the
new number.
Tip
•• Press once or several times on the alphanumeric key to
enter the selected character.
•• Press REDIAL/C to delete the character. Press
to move the cursor left and right.
and
Edit a record
1
2
3
4
5
Press MENU/OK.
Select [PHONEBOOK] > [EDIT], then
press MENU/OK to confirm.
Select a contact, then press MENU/OK to
confirm.
Edit the name, then press MENU/OK to
confirm.
Edit the number, then press MENU/OK to
confirm.
»» The record is saved.
Delete a record
1
2
3
16
Press MENU/OK.
Select [PHONEBOOK] > [DELETE], then
press MENU/OK to confirm.
Select a contact, then press MENU/OK to
confirm.
EN
1
2
3
Press MENU/OK.
Select [PHONEBOOK] > [DELETE ALL],
press MENU/OK to confirm.
»» The handset displays a confirmation
request.
Press MENU/OK to confirm.
»» All records (except the 2 direct access
memory records) are deleted.
7 Call log
3
The call log stores the call history of all missed
or received calls. The incoming call history
includes the name and number of the caller,
call time and date. This feature is available if you
have registered to the caller ID service with
your service provider.
Your phone can store up to 20 call records. The
call log icon on the handset flashes to remind
you of any unanswered calls. If the caller allows
the display of his identity, you can view his
name or number. The call records are displayed
in chronological order with the most recent
received call at the top of the list.
View the call records
Note
•• Make sure that the number in the call list is valid before
you can call back directly from the call list.
The icons shown on the screen tell you
whether they are missed/received calls.
Icons
Description
It remains steadily on when browsing
incoming calls in the call log.
It flashes when there is a new missed
call.
It remains steadily on when browsing
the missed calls in call log.
Call list type
You can set whether you can view all incoming
calls or missed calls from this menu.
1
2
Select an option, then press MENU/OK to
confirm.
Press .
»» The incoming call log is displayed.
Select a record, then press MENU/OK
and select [VIEW] for more available
information.
Save a call record to the
phonebook
1
2
3
4
5
Press .
»» The incoming call log is displayed.
Select a record, then press MENU/OK to
confirm.
Select [SAVE NUMBER], then press
MENU/OK to confirm.
Enter and edit the name, then press
MENU/OK to confirm.
Enter and edit the number, then press
MENU/OK to confirm.
»» The record is saved.
Return a call
1
2
3
Press .
Select a record on the list.
Press
to make the call.
Select the call list type
Delete a call record
1
2
1
Press MENU/OK.
Select [SERVICES] > [CALL LISTS], then
press MENU/OK to confirm.
Press .
»» The incoming call log is displayed.
EN
17
2
3
4
Select a record, then press MENU/OK to
confirm.
Select [DELETE], then press MENU/OK
to confirm
»» The handset displays a confirmation
requests.
Press MENU/OK to confirm.
»» The record is deleted.
Delete all call records
1
2
3
4
18
Press .
»» The incoming call log is displayed.
Press MENU/OK to enter the options
menu.
Select [DELETE ALL], then press MENU/
OK to confirm
»» The handset displays a confirmation
requests.
Press MENU/OK to confirm.
»» All records are deleted.
EN
8 Redial list
The redial list stores the call history of dialed
calls. It includes the names and/or numbers you
have called. This phone can store up to 10 redial
records.
View the redial records
Press REDIAL/C.
2
3
4
1
2
1
2
3
Select a record, then press .
»» The number is dialed out.
Save a call record to the
phonebook
1
2
3
4
5
Select [DELETE], then press MENU/OK
to confirm.
»» The handset displays a confirmation
request.
Press MENU/OK to confirm.
»» The record is deleted.
Delete all redial records
Redial a call
Press REDIAL/C.
Select a record, then press MENU/OK to
confirm.
4
Press REDIAL/C to enter the list of dialed
calls.
Select a record, then press MENU/OK to
confirm.
Select [DELETE ALL], then press MENU/
OK to confirm.
»» The handset displays a confirmation
request.
Press MENU/OK to confirm.
»» All records are deleted.
Press REDIAL/C to enter the list of dialed
calls.
Select a record, then press MENU/OK to
confirm.
Select [SAVE NUMBER], then press
MENU/OK to confirm.
Enter and edit the name, then press
MENU/OK to confirm.
Enter and edit the number, then press
MENU/OK to confirm.
»» The record is saved.
Delete a redial record
1
Press REDIAL/C to enter the list of dialed
calls.
EN
19
9 Phone settings
You can customize the settings to make it your
own phone.
Sound settings
Set the handset's ringtone volume
Set the docking tone
Docking tone is the sound made when you
place the handset on the base station or
charger.
1
2
3
You can select among 5 ringtone volume levels
or [OFF].
1
2
3
Press MENU/OK.
Select [PHONE SETUP] >[SOUNDS] >
[RING VOLUME], then press MENU/OK
to confirm.
Select a volume level, then press MENU/
OK to confirm.
»» The setting is saved.
Set the handset's ringtone
You can select from 10 ringtones.
1
2
3
Press MENU/OK.
Select [PHONE SETUP] > [SOUNDS] >
[RING TONE], then press MENU/OK to
confirm.
Select a ringtone, then press MENU/OK
to confirm.
»» The setting is saved.
Set the key tone
Key tone is the sound made when you press a
key on the handset.
1
2
3
20
Press MENU/OK.
Select [PHONE SETUP] > [SOUNDS] >
[KEY TONE], then press MENU/OK to
confirm.
Select [ON]/[OFF], then press MENU/OK
to confirm.
»» The setting is saved.
EN
Press MENU/OK.
Select [PHONE SETUP] > [SOUNDS] >
[DOCKING TONE], then press MENU/
OK to confirm.
Select [ON]/[OFF], then press MENU/OK
to confirm.
»» The setting is saved.
Name the handset
The name of the handset can be up to 10
characters. It is displayed on the handset screen
in standby mode. You can press MENU/OK to
switch between and handset name and date
and time display.
1
2
3
4
Press MENU/OK.
Select [PHONE SETUP] > [PHONE
NAME], then press MENU/OK to confirm.
Enter or edit the name. To erase a
character, press REDIAL/C.
Press MENU/OK to confirm.
»» The setting is saved.
Set the date and time
For information, see 'Set the date and time'
and 'Set the date and time format' in the Get
started section.
Set the display language
Note
•• This feature only applies to models with multiplelanguage support.
•• Languages available vary from country to country.
1
2
3
Press MENU/OK.
Select [PHONE SETUP] > [LANGUAGE],
then press MENU/OK to confirm.
Select a language, then press MENU/OK
to confirm.
»» The setting is saved.
EN
21
10Services
The phone supports a number of features that
help you handle and manage the calls.
Call list type
You can set whether you can view all incoming
calls or missed calls from this menu.
Select the call list type
1
2
3
Press MENU/OK.
Select [SERVICES] > [CALL LISTS], then
press MENU/OK to confirm.
Select an option, then press MENU/OK to
confirm.
Auto conference
1
2
3
1
2
3
Select [AUTO]/[OFF], then press MENU/
OK to confirm.
»» The setting is saved.
Network type
Note
•• This feature only applies to models with network type
support.
22
EN
Select a network type, then press MENU/
OK.
»» The setting is saved.
Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
duration. You can select among 3 options:
[SHORT], [MEDIUM] and [LONG]. The
number of available options varies with different
countries. For details, consult your service
provider.
1
2
3
Press MENU/OK.
Select [SERVICES] > [RECALL TIME],
then press MENU/OK to confirm.
Select an option, then press MENU/OK to
confirm.
»» The setting is saved.
Dial mode
Press MENU/OK.
Select [SERVICES] > [CONFERENCE],
then press MENU/OK to confirm.
Select [SERVICES] > [NETWORK TYPE],
then press MENU/OK.
Select the recall duration
To join an external call with another handset,
press .
Activate/Deactivate auto conference
Press MENU/OK.
Note
•• This feature only applies to models that support both
tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
Set the dial mode
1
2
Press MENU/OK.
Select [SERVICES] > [DIAL MODE], then
press MENU/OK to confirm.
3
Select a dial mode, then press MENU/OK
to confirm.
»» The setting is saved.
Note
•• For models with an answering machine, you hear a
confirmation beep.
Note
»» Registration is complete in less than 2
minutes. The base automatically assigns
a handset number to the handset.
•• If your phone is in pulse dial mode, press * during a call
for temporary tone mode. Digits entered for this call
are then sent out as tone signals.
Note
Register the handsets
•• If the PIN is incorrect or no base is found within a
certain period, your handset displays a notification
message. Repeat the above procedure if registration
fails.
You can register additional handsets to the base
station. The base station can register up to 4
handsets.
•• The preset PIN is 0000. No change can be made on it.
Auto registration
Place the unregistered handset on the base
station.
»» The handset detects the base station
and start to register automatically.
»» Registration is completed in less than 2
minutes. The base station automatically
assigns a handset number to the
handset.
Manual registration
If auto registration fails, register your handset
manually to the base station.
1
2
3
4
Press MENU/OK on the handset.
Select [SERVICES] > [REGISTER], then
press MENU/OK to confirm.
Enter the system PIN. Press REDIAL/C to
make corrections. Then press MENU/OK
to confirm the PIN.
Press and hold
5 seconds.
Note
on the base station for
Unregister the handsets
1
2
3
4
5
6
If two handsets share the same base
station, you can unregister a handset with
another handset.
Press MENU/OK.
Select [SERVICES] > [UNREGISTER],
then press MENU/OK to confirm.
Enter the system PIN. (The preset PIN is
0000). Press REDIAL/C to remove the
number.
Select the handset number to be
unregistered.
Press MENU/OK to confirm.
»» The handset is unregistered.
Tip
•• The handset number displays beside the handset name
in standby mode.
EN
23
Restore default settings
You can reset your phone settings to the
original factory settings.
1
2
3
24
Press MENU/OK.
Select [SERVICES] > [RESET], then press
MENU/OK to confirm.
»» The handset displays a confirmation
request.
Press MENU/OK to confirm.
»» All settings are reset.
EN
11Telephone
answering
machine
Note
3
Select [ANSWER ONLY]/[RECORD
ALSO]/[OFF], then press MENU/OK to
confirm.
»» The setting is saved.
Set the answering machine
language
•• Available only for CD195.
Note
•• This feature only applies to models with multiple-
Your phone includes a telephone answering
machine that records unanswered calls when
it is on. You can access the answering machine
remotely and change the settings through the
answering machine menu on the handset.
The button on the base station lights up
when the answer machine is on.
The answering machine language is the language
for the announcements.
Turn the answering machine
on or off
3
language support.
1
2
You can turn the answering machine on or off
through the base station or the handset.
Through the base
Press to turn the answering machine on or
off in standby mode.
Note
•• When the answering machine is switched on, it answers
incoming calls after a certain number of rings based on
the ring delay setting.
Through the handset
1
2
Press MENU/OK.
Select [ANSW MACHINE] > [VOICE
ANSWER], then press [OK] to confirm.
Press MENU/OK.
Select [ANSW MACHINE] >
[LANGUAGE], then press MENU/OK to
confirm.
Select a language, then press MENU/OK
to confirm.
»» The setting is saved.
Set the answer mode
You can set the answering machine and
select if the callers can leave messages. Select
[RECORD ALSO]if you allow the callers to
leave messages. Select [ANSWER ONLY] if you
forbid the callers to leave messages.
1
2
3
Press MENU/OK.
Select [ANSW MACHINE] > [VOICE
ANSWER], then press MENU/OK to
confirm.
Select an answer mode, then press MENU/
OK to confirm.
»» The setting is saved.
Note
•• If the memory is full, the answering machine switches to
[ANSWER ONLY] mode automatically.
EN
25
Announcements
The announcement is the message your caller
hears when the answering machine picks up
the call. The answering machine has 2 prerecorded announcements: [RECORD ALSO]
and [ANSWER ONLY].
Record an announcement
Listen to the announcement
1
2
3
4
The maximum length of the announcement you
can record is 3 minutes. The newly recorded
announcement automatically replaces the old
one.
1
2
3
4
5
6
Press MENU/OK.
Select [ANSW MACHINE] >
[ANNOUNCEMENT], then press MENU/
OK to confirm.
Select [ANSWER ONLY] or [RECORD
ALSO], then press MENU/OK to confirm.
Select [RECORD NEW], then press
MENU/OK to confirm.
Start recording close to the microphone
after the beep.
Press MENU/OK to stop recording or the
recording stops after 3 minutes.
»» You can listen to the newly recorded
announcement on the handset.
when you record an announcement.
Select [ANSW MACHINE] >
[ANNOUNCEMENT], then press MENU/
OK to confirm.
Select [ANSWER ONLY] or [RECORD
ALSO], then press MENU/OK to confirm.
Select [PLAY], then press MENU/OK to
confirm.
»» You can listen to the current
announcement.
Note
•• You can no longer listen to the announcement when
you pick up an incoming call.
Restore the default announcement
1
2
3
4
Note
•• Make sure that you speak close to the microphone
Press MENU/OK.
5
Press MENU/OK.
Select [ANSW MACHINE] >
[ANNOUNCEMENT], then press MENU/
OK to confirm.
Select [RECORD ALSO]or [ANSWER
ONLY], then press MENU/OK to confirm.
Select [USE DEFAULT], then press MENU/
OK to confirm.
»» The handset displays a confirmation
request.
Press MENU/OK to confirm.
»» The default announcement is restored
Incoming messages (ICM)
Each message can be up to 3 minutes long.
When you receive new messages, the new
message indicator flashes on the answering
machine and the handset displays a notification
message.
26
EN
Note
•• If you pick up the phone when the caller leaves a
message, the recording stops and you can talk to the
caller directly.
Note
•• If the memory is full, the answering machine switches to
[ANSWER ONLY] automatically. Delete old messages
to receive new ones.
Set the ring delay
You can set the number of times the phone
rings before the answering machine picks up
the call.
1
2
3
Press MENU/OK.
Select [ANSW MACHINE] > [RING
DELAY], then press MENU/OK to confirm.
Select a new setting, then press MENU/
OK to confirm.
»» The setting is saved.
Listen to the incoming messages
You can listen to the incoming messages in the
sequence they are recorded.
From the base
• To start/Stop listening, press .
• To adjust the volume, press / .
• To play the previous message/replay the
current message, press .
• To play the next message, press .
• To delete the current message, press .
Note
Note
•• Make sure that the answering machine is switched on
before this feature can be applied.
Tip
•• When you access the answering machine remotely,
you are recommended to set the ring delay to [TOLL
SAVER] mode. This is a cost effective way to manage
your messages. When there are new messages, the
answering machine picks up the call after 3 rings; When
there is no messages, it picks up the call after 5 rings.
•• No deleted messages can be recovered.
Delete an incoming message
From the base
Press when you listen to the message.
»» The current message is deleted.
Delete all old incoming messages
Press and hold on the base station in standby
mode.
»» All old messages are permanently
deleted.
Remote access
You can operate your answering machine when
you are away from home. Simply make a call to
your phone with a touch tone phone and enter
your 4-digit PIN code.
Note
•• The remote access PIN code is the same as your
system PIN. The preset PIN is 0000.
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
EN
27
1
2
3
Press MENU/OK.
Select [ANSW MACHINE] > [REMOTE
ACC.], then press MENU/OK to confirm.
Select [ON]/[OFF], then press MENU/OK
to confirm.
»» The setting is saved.
Change the PIN code
1
2
3
4
5
Press MENU/OK.
Select [ANSW MACHINE] > [REMOTE
ACC.] > [CHANGE PIN], then press
MENU/OK to confirm.
Enter the old PIN, then press MENU/OK
to confirm.
Enter the new PIN code, then press
MENU/OK to confirm.
Enter the new PIN code again, then press
MENU/OK to confirm.
»» The setting is saved.
Access the answering machine
remotely
1
2
3
Make a call to your home number with a
touch tone phone.
Enter # when you hear the announcement.
Enter your PIN code.
»» You now have access to your
answering machine, and you can now
listen to the new messages.
Note
Note
•• When there is no message, the phone hangs up
automatically if no key is pressed for 8 seconds.
Remote access commands
Key
1
2
3
6
7
8
9
Function
Repeat the current or listen to the
previous message.
Listen to messages.
Skip to the next message.
Delete the current message.
Switch the answering machine on.
(not available when you listen to the
messages).
Stop listening to the message.
Switch the answering machine off.
(not available when you listen to the
messages).
Behavior of the LED display on the
base station
The table below shows you the current status
with different LED display behavior on the base
station.
LED
display
Steady on
Flashing
•• You have 2 chances to enter the correct PIN code
before your phone hangs up.
4
28
Press a key to carry out a function. See the
Remote access commands table below for
a list of available functions.
EN
Flashing
(Fast)
Message status
• There is no new message and
the memory is not full.
• The handset is switched on.
• Enter the paging mode
• There is a new message and the
memory is not full.
• There is an incoming call.
• Recording an incoming message/announcement.
• Message playback.
• Remote access/listen to messages from the handset.
• There is no new message and
the memory is full.
• Enter the registration mode
12Technical data
Display
• Amber LCD backlight
General telephone features
• Caller name & number identification
• Conference call and voicemails
• Maximum talk time: 16 hours
Phonebook list, Redial list and Call log
• Phonebook list with 50 entries
• Redial list with 10 entries
• Call log with 20 entries
Battery
• CORUN: 2 x AAA Ni-MH 1.2V 600mAh
rechargeable batteries
• GPI: 2 x AAA Ni-MH 1.2V 600mAh
rechargeable batteries
• BYD: 2 x AAA Ni-MH 1.2V 600mAh
rechargeable batteries
Power adapter
Base and charger:
• Philips: SSW-1920UK/SG-2, Input: 100240V 50/60Hz 0.2A; Output: 6V 500mA
• Philips: S003PB060050, Input: 100-240V
50/60Hz 0.2A; Output: 6V 500mA
Power consumption
• Power consumption in standby mode:
0.6W (CD190) 0.65W (CD195)
Weight and dimensions (CD190)
• Handset: 97.7 grams
• 162.8 x 47.5 x 29.7 mm (H x W x D)
• Base: 116.9 grams
• 79.2 x 130.3 x 91 mm (H x W x D)
• Charger: 56.4 grams
• 78.5 x 80.5 x 83 mm (H x W x D)
Weight and dimensions (CD195)
• Handset: 97.7 grams
• 162.8 x 47.5 x 29.7 mm (H x W x D)
• Base: 148.8 grams
• 79.2 x 130.3 x 91 mm (H x W x D)
• Charger: 56.4 grams
• 78.5 x 80.5 x 83 mm (H x W x D)
EN
29
13Notice
Declaration of conformity
Hereby Philips Consumer Lifestyle, declares
that the CD190/CD195 is in compliance with
the essential requirements and other relevant
provisions of Directive 1999/5/EC. You can find
the Declaration of Conformity on www.p4c.
philips.com.
This product has been designed, tested and
manufactured according the European R&TTE
directive 1999/5/EC.
Use GAP standard
compliance
The GAP standard guarantees that all DECT™
GAP handsets and base stations comply with
a minimum operating standard irrespective of
their make. The handset and base station are
GAP compliant, which means they guarantee
the minimum functions: register a handset,
take the line, make a call and receive a call. The
advanced features may not be available if you
use them with other makes. To register and use
this handset with a GAP compliant base station
of different make, first follow the procedure
described in the manufacturer's instructions,
then follow the procedure described in this
manual for registering a handset. To register a
handset from different make to the base station,
put the base station in registration mode, then
follow the procedure described in the handset
manufacturer's instructions.
Compliance with EMF
Koninklijke Philips Electronics N.V. manufactures
and sells many products targeted at consumers,
which, like any electronic apparatus, in
30
EN
general have the ability to emit and receive
electromagnetic signals.
One of Philips’ leading Business Principles is to
take all necessary health and safety measures
for our products, to comply with all applicable
legal requirements and to stay well within
the EMF standards applicable at the time of
producing the products.
Philips is committed to develop, produce and
market products that cause no adverse health
effects. Philips confirms that if its products are
handled properly for their intended use, they
are safe to use according to scientific evidence
available today.
Philips plays an active role in the development
of international EMF and safety standards,
enabling Philips to anticipate further
developments in standardization for early
integration in its products.
Disposal of your old product
and batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
When this logo is attached to a product, it
means a financial contribution has been paid to
the associated national recovery and recycling
system.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
EN
31
14Frequently
asked questions
No signal bar is displayed on the screen.
•• The handset is out of range. Move it closer
to the base station.
•• If the handset displays [UNREGISTERED],
put the handset on the base until the signal
bar appears.
Tip
•• For further information, see the chapter 'Services',
section 'Register the handsets'.
If I fail to register the additional handsets to
the base station, what do I do?
Your base memory is full. Unregister the unused
handsets and try again.
No dialing tone
•• Check your phone connections.
•• The handset is out of range. Move it closer
to the base station.
No docking tone
•• The handset is not placed properly on the
base station/charger.
•• The charging contacts are dirty. Disconnect
the power supply first and clean the
contacts with a damp cloth.
I cannot change the settings of my voice mail,
what do I do?
The voice mail service is managed by your
service provider but not the phone itself.
Contact your service provider to change the
settings.
The handset on the charger does not charge.
•• Make sure the batteries are inserted
correctly.
•• Make sure the handset is placed properly
on the charger. The battery icon animates
when charging.
•• Make sure the docking tone setting is
turned on. When the handset is placed
32
EN
correctly on the charger, you can hear a
docking tone.
•• The charging contacts are dirty. Disconnect
the power supply first and clean the
contacts with a damp cloth.
•• Batteries are defective. Purchase new ones
from your dealer.
No display
•• Make sure the batteries are charged.
•• Make sure there is power and the phone is
connected.
Bad audio (crackles, echo, etc.)
•• The handset is nearly out of range. Move it
closer to the base station.
•• The phone receives interference from the
nearby electrical appliances. Move the base
station away from them.
•• The phone is at a location with thick walls.
Move the base away from them.
The handset does not ring.
Make sure the handset ringtone is turned on.
The caller ID does not display.
•• The service is not activated. Check with
your service provider.
•• The caller's information is withheld or
unavailable.
Note
•• If the above solutions do not help, disconnect the
power supply from both the handset and base station.
Try again after 1 minute.
15Appendix
Text and number input tables
key
0
1
2
3
4
5
6
7
8
9
*
#
Characters (for English/Latin)
space 0 Ø
-1
ABC2
DEF3
GHI4
JKL5
MNO6
PQRS7
T UV 8
W XY Z 9
*?/\()
# ' ,- &
key
0
1
2
3
4
5
6
7
8
9
Characters (for Norwegian/Danish/Polish)
space 0
-1
AÆBC2
DEF3
GHI4
JKL5
MNO6
PQRS7
T UV 8
W XY Z 9
Key
0
1
2
3
4
5
6
7
8
Characters (for Greek)
space 0
-1
ABΓ2
ΔEZ3
HΘ|4
KΛM5
NΞO6
ΠPΣ7
TY Φ 8
9
XΨΩ9
key
0
1
2
3
4
5
6
7
8
9
Characters (for Polish)
space 0
-1
ABC2
DEF3
GHI4
JKLŁ5
MNO6
PQRS7
T UV 8
W XY Z 9
EN
33
0168
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.