Download Peerless PM1327W flat panel wall mount
Transcript
With TV dismounted, place belt assembly over TV and reposition the components according to dimensions in drawing below. Note: keep buckle closer to left side of TV to allow for movement when tightening belt assembly. Trim off the end of the belt if necessary, then lightly burn the end of the belt to prevent fraying. Repeat step 3 for the other side of the TV. B * B 2” 6” * 6” 2” A 6” A 6” 12” 12” * * BELT PLACEMENT WHEN TV IS IN TILT POSITION BELT PLACEMENT WHEN TV IS IN NO TILT POSITION Make sure that TV surface is clean of grease, oil and dust. Once all components are in place, remove sticker from bottom of belt guides and firmly press them onto the TV. 3 of 15 Visit the Peerless Web Site at www.peerlessmounts.com ISSUED: 10-22-99 SHEET #: 120-9023-2 12-14-09 For customer care call 1-800-729-0307 or 708-865-8870.
This document in other languages
- français: Peerless PM1327S
- español: Peerless PM1327S