Download Peerless ADD106 flat panel ceiling mount

MODELS: ADD012018, ADD018024, ADD0203, ADD0305, ADD0406, ADD0507, ADD0608, ADD0709, ADD0810, ADD0911, ADD1012
SPECIFICATIONS
Structural Ceiling
Decoupler model DCS400
Truss Ceiling Decoupler
model DCT300...
LENGTH (L) - adjustable at
1"increments
*SHIPPING *SHIPPING *SHIPPING *SHIPPING
*SHIPPING
WEIGHT
WEIGHT
WEIGHT
WEIGHT in. (meter)
WEIGHT
lb (kg)
lb (kg)
MODEL#
MINIMUM
MAXIMUM
CEILING
5.3" (135mm)
4.5" (114mm)
..attached to
I-beam.
..attached to
round beam.
4.7" (119mm)
Extension
Column
L
Multi-Display Carousel models
MD220, MD320, MD390, MD420,
MD520, MD620, MD227, MD297,
MD327, MD397, MD427, MD527,
MD627
4.5 (2)
5 (2.3)
ADD012018
12 (.3)
18 (.46)
3 (1.4)
5.5 (2.5)
ADD018024
18 (.460
24 (.61)
8 (3.6)
8.2 (3.7)
ADD0203
22.25 (.57)
34.25 (.87)
9.8 (4.4)
13.3 (6)
ADD0305
34.25 (.87)
58.25 (1.48)
13 (5.9)
16 (7.3)
ADD0406
46.25 (1.17)
70.25 (1.78)
16.5 (7.5)
21 (10)
ADD0507
58.25 (1.48)
82.25 (2.09)
18 (8.2)
22 (11)
ADD0608
70.25 (1.78)
94.25 (2.39)
19.5 (8.8)
24 (11)
ADD0709
82.25 (2.09)
106.25 (2.70)
21 (9.5)
26 (12)
ADD0810
94.25 (2.39)
118.25 (3)
ADD0911
106.25 (2.70)
130.25 (3.31)
ADD1012
118.25 (3)
142.25 (3.61)
22.5 (10.2) 30.3 (13.7)
28 (12.7)
See page 2 for
Multi-Display Dual
Jumbo Mounts
8.8" (224mm)
34 (15.4)
** BALANCED MAXIMUM LOAD CAPACITY for all
Extension Columns for Multi-Display Mounts: 800 lb (363 kg)
* Shipping weight based on single unit shipment.
Per unit shipping weight may be less for bulk orders.
The Extension Column for Multi-Display Mounts
is one of three elements required for MultiDisplay Ceiling Mount installations. It is available
in several lengths which are adjustable at 1"
increments (see specifications, above right).
Multi-Display Carousels, Multi-Display Dual
Jumbo Mounts, Structural Ceiling Decoupler, and
Truss Ceiling Decoupler are sold separately. For
additional information see Technical Data Sheets
for these products.
** Balanced Maximum Load Capacity includes the combined weight
of the Multi-Display Carousel or Dual Jumbo Mount (page 2) and all
equipment (TVs and VCRs). All TVs and VCRs must be of the
same model for proper balance/stability.
Protected by U.S. Patent no. 5127617 and 5487524. International patents pending.
R
Architects specifications:
The extension column shall be a Peerless model ADD_____ . It shall offer a ___ inch
range of height adjustment at 1" increments. It shall be constructed of steel tubing and
finished in scratch resistant black fused epoxy. It shall be UL Listed. Assembly and
installation shall be done according to the instructions provided by the manufacturer.
TECHNICAL DATA SHEET
EXTENSION COLUMN FOR MULTI-DISPLAYTM MOUNTS
Peerless Industries, Inc.
3215 W. North Ave.
Melrose Park, IL 60160
phone: (708) 865-8870
fax: (708) 865-2941
ISSUED: 8-25-94 SHEET NO:139-9507-3 8-19-03
page 1 of 2
MODELS: ADD012018, ADD018024, ADD0203, ADD0305, ADD0406, ADD0507, ADD0608, ADD0709, ADD0810, ADD0911, ADD1012
EXTENSION COLUMN FOR
MULTI-DISPLAY MOUNTS
bolt
lock nut
adjuster tube
The "tube in tube" design
of the Adjustable Extension Column allows it to
be adjusted, within its
specified range, at 1 inch
(25mm) increments. Two
bolts and two lock nuts
are provided. One locks
the extension column
securely to the ceiling
decoupler. The other
securely locks the two
tubes together at the
desired length. The
retaining collar is used to
attach the Multi-Display
Carousel or Multi-Display
Dual Jumbo Mount to the
end of the extension
Pipe.
Structural Ceiling
Decoupler model DCS400
Truss Ceiling Decoupler
model DCT300...
CEILING
5.3" (135mm)
4.5" (114mm)
..attached to
I-beam.
..attached to
round beam.
4.7" (119mm)
Extension
Column
See
"Specifications"
(page 1).
Multi-Display Dual Jumbo Mount models
MDJ630, MDJ640, MDJ640D, MDJ650,
MDJ650D, MDJ660
adjuster tube
H
L
A
See page 1 for Multi-Display Carousels
W
extension pipe
ID 1.32" (34mm) x
OD 1.56" (40mm)
B
C
TOP VIEW
extension pipe
Note: For dimensions A, B, C, H and W see TD Sheet for Multi-Display Dual Jumbo Mount .
The Extension Column for Multi-Display
Mounts is one of three elements required for
Multi-Display Ceiling Mount installations. It is
available in several lengths which are
adjustable at 1" increments (see specifications, page1). Multi-Display Carousels, Multi-
retaining collar
ID 1.61" (41mm) x
OD 1.90" (48mm)
© 2003 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Display Dual Jumbo Mounts, Structural
Ceiling Decoupler, and Truss Ceiling
Decoupler are sold separately. For additional
information see Technical Data Sheets for
these products.
page 2 of 2
ISSUED: 8-25-94 SHEET NO:139-9507-3 8-19-03