1
Download AMX EXB-COM2
Transcript
EXB-MP1 NetLinx Programming EXB-MP1 SEND_COMMANDs The following NetLinx SEND_COMMANDs are supported by the EXB-MP1 Module: EXB-MP1 SEND_COMMANDs Command Page Reference Command Page Reference B9MOFF page 37 LED-DIS page 42 B9MON page 37 LED-EN page 42 CAROFF page 37 REBOOT page 44 CARON page 37 RXCLR page 45 CH page 38 RXOFF page 45 CHARD page 38 RXON page 45 CHARDM page 38 SET_NDX_DESC page 47 CP page 39 SET BAUD page 45 CTOF page 39 SET DBT page 46 CTON page 39 SET DBTF page 46 CTSPSH page 40 SET INPUT page 46 CTSPSH OFF page 40 SET MODE page 47 ESCSEQOFF page 40 SET OFF DELAY page 47 ESCSEQON page 40 SET ON DELAY page 47 GET BAUD page 40 SP page 48 GET DBT page 40 TSET BAUD page 48 GET INPUT page 41 TXCLR page 48 GET MODE page 41 XCH page 49 GET OFF DELAY page 41 XCHM page 49 GET ON DELAY page 41 XOFF page 50 HSOFF page 41 XON page 50 HSON page 41 IROFF page 42 SEND_STRING Escape Sequences The EXB-COM2 and EXB-MP1 support several special SEND_STRING escape sequences. If any of the escape sequences are found anywhere within a SEND_STRING program instruction, they will be treated as a command and not the literal characters. See the SEND_STRING Escape Sequences section on page 51 for details. Telnet commands Refer to the Terminal (Telnet) Commands section on page 53 for a listing of all supported Telnet commands. 34 ICSLan Device Control Boxes
