Download Nokia E72 Black
Transcript
WLAN internet access points Select Menu > Ctrl. panel > Settings and Connection > Destinations > Access point, and follow the instructions on the display. Or, open one of the access point groups, select an access point marked with , and select Options > Edit. Use the instructions provided by your service provider to edit the following: • WLAN network name — Select Enter manually or Search for networks. If you select an existing network, WLAN network mode and WLAN security mode are determined by the settings of its access point device. • Network status — Define whether the network name is displayed. • WLAN network mode — Select Ad-hoc to create an ad hoc network, and to allow devices to send and receive data directly; a WLAN access point device is not needed. In an ad hoc network, all devices must use the same WLAN network name. • WLAN security mode — Select the encryption used: WEP, 802.1x, orWPA/WPA2. (802.1x and WPA/WPA2 are not available for ad hoc networks.) If you select Open network, no encryption is used. The WEP, 802.1x, and WPA functions can be used only if the network supports them. • Use access point — Select After confirmation to set the device to ask for confirmation before the connection using this access point is created or Automatically to set the device to connect to the destination using this access point automatically. Settings • Homepage — Depending on the access point type you are setting up, enter the web address or the address of the multimedia message centre. • Use access point — Select After confirmation to set the device to ask for confirmation before the connection using this access point is created, or Automatically to set the device to connect to the destination using this access point automatically. Select Options > Advanced settings and from the following: • Network type — Select the internet protocol type to transfer data to and from your device. The other settings depend on the selected network type. • Phone IP address (for IPv4 only) — Enter the IP address of your device. • DNS addresses — Enter the IP addresses of the primary and secondary DNS servers, if required by your service provider. To obtain these addresses, contact your internet service provider. • Proxy server address — Enter the address of the proxy server. • Proxy port number — Enter the port number of the proxy server. To enter the settings for the selected security mode, select WLAN security settings. Advanced WLAN settings Select Options > Advanced settings and from the following: • IPv4 settings — Enter the IP address of your device, the subnet IP address, the default gateway, and the IP addresses of the primary and secondary DNS servers. Contact your internet service provider for these addresses. • IPv6 settings — Define the type of DNS address. 119