Transcript
TH-WH-PJ-FM Technical Specifications TM Projector Ceiling Mount | Flush Dimensions NOTE: - This product has been designed to suit - 90% of projectors. - Maximum load =15kg (33lbs). - Mounting hardware included. Roll +/- 20° Pitch +/- 40° Ceiling Plate NOTE: 4 sets of Extension Bracket lengths are included to suit most mounting configurations. Any combination of these brackets may be used. 2x50mm (2”) 2x100mm (4”) 2x75mm (3”) 2x150mm (5 7 8”) Minimum reach = 65mm (2 9 16”) (from centre of bracket) 65mm (2 9 16“) Projector 200mm 8 (7 7 “) 127 mm (5”) +/- 20º Roll +/- 40º Pitch Maximum reach = 200mm (7 7 8 ”) (from centre of bracket) Projector mounting screws and washers included: - M2.5x15 (x4)- M3x15 / M3x20 (x4 each) - M4x15 / M4x20 / M4x25 / M4x30 - (x4 each) - M5x15 / M5x20 / M5x25 / M5x30 - (x4 each) - M6x15 / M6x20 / M6x25 / M6x30 - (x4 each) - Washer 10mm / 8mm Washer (x4 each) Extension Bracket Mounting hardware included: - Nylon Anchor Plug (x4) - 14 Guage Coach Screw (x4) - Washer 20mm (x4) Maximum distance bracket can be secured from top of projector = 10mm ( 3 8 ”) 160 mm (6¼") 100 mm (4") Warranty: 10 years limited 9 mm (¼") 85 mm (3¼") 20 mm (¾") Ceiling Plate footprint (not to scale) Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 09.03.11 ©