Transcript
Technical Specifications TELEHOOK Universal Projector Flush Mount Dimensions NOTE: - This product has been designed to suit 90% of projectors Maximum load =15kg (33lbs) Mounting hardware included Ceiling Plate 127 mm (5”) NOTE: 4 sets of Extension Bracket lengths are included to suit most mounting configurations. Any combination of these brackets may be used. 2x50mm (2”) 2x100mm (4”) 2x75mm (3”) 2x150mm (57 8”) Minimum reach = 65mm (2 9 16“) (from centre of bracket) 65mm (2 9 16“) Projector 200mm (7 7 8 “) +/-20º Pan +/-40º Tilt Maximum reach = 200mm (7 7 8“) (from centre of bracket) Projector mounting screws and washers included: - M2.5x15 (x4) - M3x15 / M3x20 (x4 each) - M4x15 / M4x20 / M4x25 / M4x30 - (x4 each) - M5x15 / M5x20 / M5x25 / M5x30 - (x4 each) - M6x15 / M6x20 / M6x25 / M6x30 - (x4 each) - Washer 10mm / 8mm Washer (x4 each) Extension Bracket Mounting hardware included: - Nylon Anchor Plug (x4) - 14 Guage Coach Screw (x4) - Washer 20mm (x4) Maximum distance bracket can be secured from top of projector = 10mm ( 3 8 “) 160 mm (6¼") 100 mm (4") 9 mm (¼") 85 mm (3¼") 20 mm (¾") Ceiling Plate footprint (not to scale) Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 16.02.07 © TM