Download Axis Q1921

AXIS Q1910/-E/AXIS Q1921/-E Installation Guide
Page 5
AXIS Q1910/-E & AXIS Q1921/-E
Installation Guide
This installation guide provides instructions for installing an AXIS Q1910/-E/AXIS Q1921/-E Thermal
Network Camera on your network. For all other aspects of using the product, please see the User’s
Manual, available on the CD included in this package, or from www.axis.com
1. Check the package contents against the list below.
2. Hardware overview. See page 6.
3. Install the hardware.
• Install AXIS Q1910/AXIS Q1921. See page 8.
• Install AXIS Q1910-E/AXIS Q1921-E. See page 8.
• Connect the cables. See page 10.
4. Assign an IP address. See page 11.
5. Set the password. See page 14.
Important!
This product must be used in
compliance with local laws and
regulations.
Package contents
Item
Models/variants/notes
Network camera
AXIS Q1910/-E (8.3 fps)
AXIS Q1921/-E (8.3/30 fps)
Note: Frame rate above 9 fps may be subject to export control regulations
Terminal block
connector
4-pin connector for connecting external devices to the I/O terminal connector; 3-pin
connector for power connection; 2-pin connector for RS-485/422 connection
Camera stand
(AXIS Q1910/AXIS Q1921)
Wall bracket
(AXIS Q1910-E/AXIS Q1921-E) Wall bracket with internal cable channel
Metal stand supplied with mounting screws
Tools
(AXIS Q1910-E/AXIS Q1921-E) Torx T20 Screwdriver; Allen key
Network cable
(AXIS Q1910-E/AXIS Q1921-E) Outdoor network cable 5 m (16 ft.) with gasket
M20 Cable gland (for IP66)
CD
AXIS Network Video Product CD, including product documentation, installation tools
and other software
Printed materials
AXIS Q1910/-E/AXIS Q1921/-E Installation Guide (this document);
Axis Warranty Document; Extra serial number labels (2x); AVHS Authentication key
Optional accessories
See www.axis.com for information on available accessories.
ENGLISH
Installation steps