Transcript
Mini DisplayPort to DVI-D Single-Link cable A C C E S S O R I E Club 3D UltraAV Mini DisplayPort to DVI-D (Digital) cable enables the connection of your Mini DisplayPort supported computer to a DVI-D supported television, monitor or projector. Simply connect the Mini DisplayPort (male) end of the connector to your computer and plug your existing DVI-D cable from the display into the DVI (female) adapter. Setup is complete, no software installation required. The circuitry built into the adapter seamlessly converts the Mini DisplayPort’s video signal into a DVI digital video signal, requiring no external power. S Connector 1 Mini DisplayPort Male Connections Connector 2 DVI-D Single Link Female Single Link DV I - I Compatibility Club 3D graphic cards with Mini DisplayPort output or any Mini DisplayPort compatible device. Dual Link DV I - I Mini DisplayPort Single Link DV I - D Dual Link DV I - D DV I - A Mini DisplayPort DVI-D Single-Link Disclaimer While we endeavor to provide the most accurate, up-to-date information available, the content on this document may be out of date or include omissions, inaccuracies or other errors. Therefore Club 3D does not accept any rights claimed on the content of this document. Please refer to a full overview of our Legacy Terms and Conditions on www. club-3d.com. All other brand names are trademarks or registered trademarks and are the property of their respective owners. All content is subject to change without prior notice. Copyright © 2010, Club 3D B.V. Rev. 1.2 Item code: CAC-1100 EAN code: 8717249408482 2 December 2010 www.club-3d.com