Download Caso 02035 hob
Transcript
Troubleshooting Please note ► If error messages continue to be displayed after an extended waiting period or after restarting the appliance, then it must be sent to Customer Service to be examined. 17.3 Causes and rectification of faults The following table assists in localizing and rectifying minor faults. Fault Display is empty The E1 error appears frequently during operation The E2/E6 error appears frequently Possible Cause To Rectify Power plug not plugged in ► Insert plug into mains socket Fuse switch not switched on ► Switch on fuse switch Cooking vessel too small ► Use larger cooking vessel Cooking vessel not centred on the hob ► Position cooking vessel correctly Ventilation slots blocked ► Keep ventilation slots free Fan not running ► Send the appliance to Customer Service Please note ► If you are unable to solve the problem with the steps shown above, please contact Customer Service. caso Blue Two 62
This document in other languages
- français: Caso 02035
- Deutsch: Caso 02035
- italiano: Caso 02035