Download Supermicro C2SBM-Q

C2SBM-Q User's Manual
Native Mode Operation
Select Serial ATA for SATA or select Auto (Native Mode) for ATA. The options are:
Serial ATA and Auto.
Serial ATA (SATA) RAID Enable
Select Enable to enable Serial ATA RAID Functions. (*For the Windows OS
environment, use the RAID driver if this feature is set to Enabled. When this item
is set to Enabled, the item: ICH RAID Code Base will be available for you to select
either Intel or Adaptec HOST RAID firmware to be activated. Is this item is set to
Disabled, the item SATA AHCI Enable will be available.) The options are Enabled
and Disabled.
ICH RAID Code Base
Select Intel to enable the Intel SATA RAID firmware. Select Adaptec to use the
Adaptec HostRAID firmware. The options are Intel and Adaptec.
SATA AHCI Enable
Select Enable to enable the function of Serial ATA Advanced Host Interface. (*Take
caution whe using this function. This feature is for advanced programmers only.
The Enhanced AHCI mode is available when the Windows XP-SP1 OS and the
IAA driver is used.) The options are Enabled and Disabled.
SATA AHCI Legacy Enable
Select Enable to use Legacy Mode for SATA Advanced Host Interfacing. When
the feature is set to Enabled, SATA Port 5 and SATA Port 6 are disabled. (*Take
caution enable the function of Serial ATA Advanced Host Interface.(*Take caution
whe using this function. This feature is for advanced programmers only.) The options
are Enabled and Disabled.
4-4