Download Marmitek MS90

TEST MODE:
TESTING THE LOCATION OF YOUR MOTION DETECTOR
1.
2.
3.
4.
5.
Set the switch (4) to 1.
Press the TEST button (3) until the indicator (2) flashes twice.
Wait 20 seconds.
Walk in front of the sensor. The indicator (2) lets you know when a movement has been
detected. This allows you to check whether the sensor has been mounted on the right
place.
Press the TEST button again to be able to use the sensor as normal.
☺ After 2 minutes the motion detector will go back to the normal mode.
TECHNICAL DATA
Power :
RF Range:
PIR range:
Dimensions:
Frequency:
2x AA battery
Up to 30m through walls and ceilings
180º - 6 meter, in a straight line - 12 meter
76x100x42mm
433.92 MHz
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging
must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed
of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and
electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For
more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product.
4
MARMITEK