Download Axis M1103
Transcript
AXIS M11 Series - Video Video Click to access the online help that explains the Setup tools. Video Stream The video stream settings appear under three different tabs: • • • Image H.264 MJPEG Preview For a preview of the image before saving, select the Video format and click Open. The pixel counter shows the number of pixels in an area of the image and can be used to ensure that the size of the image fulfills certain requirements, for example for face recognition. Use the mouse to move and resize the rectangle, or enter the number of pixels in the Width and Height fields and click Apply. When satisfied with the settings, click Save. Image Image Appearance Use these settings to modify the image resolution and compression. Setting the compression level affects the image quality and the amount of bandwidth required; the lower the compression, the higher the image quality with higher bandwidth requirements. The image can also be mirrored (reversed) and rotated. Digital PTZ shows if Digital PTZ has been enabled or not. If enabled, the maximum zoom rate is shown under Max. To configure the Digital PTZ and Max zoom settings, click the Digital PTZ link or navigate to PTZ > PTZ Settings. Note that the resolutions available in the Resolution drop-down list depend on the selected maximum zoom. See PTZ Settings, on page 21. Video Stream To avoid bandwidth problems on the network, the frame rate allowed to each viewer can be limited. Select the Unlimited radio button option to allow the highest available frame rate; or select the Limited to radio button option and enter a value (1-30) fps in the field. Text, date & time overlay Overlay Settings To place an overlay image at specific coordinates in the image, check Include overlay image at the coordinates and enter the X and Y coordinates. The overlay image must first be uploaded to the network camera, see Overlay Image, on page 18. Text, date, and time can also be used as an overlay. Click for information on available options. 15