Download Hitachi CP-X2510 data projector

SETUP menu
Item
Description
Using the ▲/▼ buttons switches the mode for mirror status.
MIRROR
NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT
If the Transition Detector is on and MIRROR status is changed,
TRANSITION DETECTOR ON alarm (50) will be displayed when
projector is restarted after the AC power is turned off.
変
STANDBY MODE
Using ▲/▼ buttons switches the standby mode setting between
NORMAL and SAVING.
SAVING ó NORMAL
When SAVING is selected, the power consumption in the standby
mode is lowered with some functional restriction as below:
• When SAVING is selected, the RS-232C communication control is
disabled except to turn the projector on while the projector is in the
standby mode.
• When SAVING is selected, AUDIO OUT STANDBY setting of
AUDIO SOURCE (36) is invalid, and no signal is output from
AUDIO OUT ports in the standby mode.
The combination of a picture shown on screen and output from the
MONITOR OUT port can be arranged in the menu.
The picture coming into the port selected in the (2) is output to the
MONITOR OUT port while an image from the port chosen in the (1)
is on screen.
(1) Choose a picture input port using ▲/▼ buttons.
COMPUTER IN1 ó COMPUTER IN2

STANDBY
COMPONENT

VIDEO ó S-VIDEO ó (Y, Cb/Pb, Cr/Pr)
MONITOR OUT
• Choose STANDBY, to select the output
signal from the MONITOR OUT port in
the standby mode.
(2) Select one of the COMPUTER IN ports using ◄/► buttons.
Choosing the COMPUTER IN1 allows the following choice.
COMPUTER IN1 ó OFF
Choosing the COMPUTER IN2 allows the following choice.
COMPUTER IN2 ó OFF
Choosing other input or STANDBY allows the following choice.
COMPUTER IN1 ó COMPUTER IN2 ó OFF
変
• OFF disables the MONITOR OUT port.
追
35