Download Axis Q1755
Transcript
AXIS Q1755 - Event Event An event or Event Type triggers actions when activated. An event type is a set of parameters that defines the actions. A common event type is an alarm that causes the camera to upload images. Many event types require an Event Server, to receive uploaded images. This section describes how to configure the camera to perform certain actions when events occur. Definitions Event type A set of parameters describing how and when the camera performs certain actions Triggered Event - see page 24 An event that is started by some sort of signal, for example, an external device such as a door switch, motion detection, or system event. Scheduled Event - see page 25 Pre-programmed time period(s) during which an event will run. Action This occurs when the event runs, for example, uploading of images to an FTP server, or email notification. Event Servers Event Servers are used to receive uploaded image files and/or notification messages. To set up Event Server connections in your camera, go to Setup > Event Configuration > Event Servers and enter the required information for the required server type. Server type Purpose Information required • Receives uploaded images • Descriptive name of your choice • Network address (IP address or host name) • User Name and Password • Receives notification messages • Receives uploaded images • Descriptive name of your choice • URL (IP address or host name) • User Name and Password • Receives notification messages • Descriptive name of your choice • Network address (IP address or host name) • Port number FTP Server HTTP Server TCP Server For details on each setting, see the online help available from each web page. When the setup is complete, the connection can be tested by clicking the Test button (the connection test takes approximately 10 seconds). Event Types An Event Type describes how and when the camera is to perform certain actions. 23