Download Integrated Lights Out Manager (ILOM) Administration Guide for ILOM

FIGURE 13-1
RADIUS Page
3. Complete the settings. For details, see TABLE 13-1.
4. Click Save for your changes to take effect.
13.2.2
Configuring RADIUS Using the CLI
1. Log in to the CLI as administrator.
2. Navigate to /SP/clients/radius.
3. Set the parameters shown in TABLE 13-1.
13.2.3
RADIUS Parameters
TABLE 13-1 describes the RADIUS parameters for the WebGUI and the CLI.
TABLE 13-1
RADIUS WebGUI and CLI Settings
WebGUI
CLI
Description
Default Role
defaultrole
administrator|operator
Sets the default role for all RADIUS users:
administrator or operator
IP Address
ipaddress ipaddress
The IP address of the RADIUS server
Port
port portnum
The port number used to communicate with
the RADIUS server. The default port is 1812.
Chapter 13
RADIUS
13-3