Download USG - Stihl

English
3
+
1
+
-
A
C
Set angles as specified in the
following table.
Type of tooth
Scale
A
Scale
C
Chisel tooth,
standard
+5°...+15°1) +15°/ -15°
Chisel tooth,
special
+5°...+15°1) +15°/ -15°
Scratcher
tooth2)
0°
0°
Carbide
tipped blade
7°
+5°/-5°
1)
Depending on type of wood, set
between +5° (for hardwood) and
+15° (for soft wood)
2) Scratcher tooth saw blade with 80
teeth cannot be sharpened with the
USG
USG
1
3
Adjusting the Stop
Adjusting the lateral stop
:
Swing the motor arm down.
:
Use the adjusting screw (1) to move
the stop (2) so that the side plate of
the tooth to be sharpened butts
against the grinding wheel – make
sure the stop locates firmly against
the back of one tooth.
:
The stop can be moved in the
slot (3) to suit the saw blade.
2
523BA101 KN
:
2
523BA127 KN
523BA126 KN
-
Adjusting sharpening depth
:
Swing the motor arm down until the
required sharpening depth is
reached – see "Sharpening
profiles".
:
Screw home the travel limiting
screw (1) until it butts against the
stop lug (2).
:
Tighten down the knurled nut (3)
firmly.
29