Download SERVICE MANUAL

SLV-SE100/SE200/SE250/SE300/
SE400/SE450/SX100/SX250
RMT-V257/V257A/V257B/V257C/V287
SERVICE MANUAL
AEP Model
SLV-SE100A1/A2/K,SE200V1/V2,
SE250B/D/P,SE300D1/D2,
SE400K,SE450B/D/K/P,
SX100K,SX250D
UK Model
SLV-SE200G/I,SE300G
East European Model
Russian Model
SLV-SE100K,SE400K,
SE450K,SX100K
(Except UK Model)
Photo : SLV-SE450D
RMT-V257B
S MECHANISM
(UK Model only)
Refer to the SERVICE MANUAL of VHS
MECHANICAL ADJUSTMENT for
MECHANICAL ADJUSTMENTS. (9-921-647-11)
The abbreviations of SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250 contained in this service manual
are indicated when these models are common to all their corresponding models as given below.
Abbreviated models name SE100
SE250
SE300
SE450
SX100
SX250
All models name
SE100A1 SE200G
SE250B
SE300D1 SE400K
SE450B
SX100K
SX250D
SLV-
SE100A2 SE200I
SE250D
SE300D2
SE450D
SE300G
SE450K
SE100K
SE200
SE200V1 SE250P
SE400
SE200V2
SE450P
SPECIFICATIONS
System
Channel coverage
SLV-SE100K,SE400K,SE450K,SX100K:
PAL (B/G, D/K)
VHF E2–E12, R1–R12
UHF E21–E69, R21–R69
CATV S1–S41, S01–S05
SLV-SE200G/I, SE300G:
PAL (I)
VHF IA to IJ, SA10 to SA13 (SLV-SE200I only)
UHF B21 to B69
CATV S01 to S05, S1 to S20 (SLV-SE200I only)
HYPER S21 to S41 (SLV-SE200I only)
SLV-SE100A1/A2, SE200V1/V2, SE250D/P,
SE300D1/D2, SE450D/P, SX250D:
PAL (B/G)
VHF E2 to E12
Canaux VHF italiens A to H
UHF E21 to E69
CATV S01 to S05, S1 to S20
HYPER S21 to S41
SLV-SE250B,SE450B:
SECAM (L):
VHF F2 to F10
UHF F21 to F69
CATV B to Q
HYPER S21 to S41
PAL (B/G):
VHF E2 to E12
Canaux VHF italiens A to H
UHF E21 to E69
CATV S01 to S05, S1 to S20
HYPER S21 to S41
RF output signal
UHF channels 21–69
Aerial out
75-ohm asymmetrical aerial socket
Tape speed
SP:
PAL/MESECAM 23.39 mm/s
NTSC 33.35 mm/s
(SLV-SE250B,SE450B only)
SECAM 23,39 mm/s (recording/playback)
MESECAM 23,39 mm/s (playback only)
LP*: PAL/MESECAM 11.70 mm/s
(playback only, except: SLV-SE200G/I, SE300G)
(recording/playback: SLV-SE200G/I, SE300G)
NTSC 16.67 mm/s (playback only)
(SLV-SE450B only)
SECAM 11,70 mm/s (recording/playback)
MESECAM 11,70 mm/s (playback only)
EP*: NTSC 11.12 mm/s (playback only)
(SLV-SE200G/I, SE250D/P, SE300D1/D2/G,
SE450B/D/P, SX250D)
Maximum recording/playback time
10 hrs. in LP mode (with E300 tape)
Fast-forward and rewind time
Approx. 3 min. (with E180 tape)
— Continued on next page —
VIDEO CASSETTE RECORDER
Inputs and outputs
General
iLINE-1 (TV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
SLV-SE250B/D/P, SE450B/D/P, SX250D:
DECODER/tLINE-2 IN
21-pin
Video input: pin 20
Audio input: pins 2 and 6
SLV-SE300D1/D2:
DECODER/tLINE-3 IN
21-pin
Video input: pin 20
Audio input: pins 2 and 6
SLV-SE300D1/D2/G:
LINE-2 IN
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO IN, phono jack (1)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
SLV-SE300G:
LINE-3 IN
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Power requirements
220 – 240 V AC, 50 Hz
Power consumption
18 W
Operating temperature
5°C to 40°C
Storage temperature
–20°C to 60°C
Dimensions
Approx. 355 × 96 × 285 mm (w/h/d)
(Approx. 14 × 3 7/8 × 11 1/4 inches)
including projecting parts and controls
Mass
Approx. 3.6 kg (Approx. 7 lb 15 oz.)
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Design and specifications are subject to change without
notice.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
1.
2.
3.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
—2—
TABLE OF CONTENTS
SERVICE NOTE
1.
ERROR CODE INDICATION ··········································· 4
1
GENERAL
Getting Started ··········································································· 1-1
Step 1 : Unpacking ································································ 1-1
Step 2 : Setting up the remote commander ···························· 1-1
Step 3 : Connecting the VCR ················································· 1-2
Step 4 : Tuning your TV to the VCR ····································· 1-2
Step 5 : Setting up the VCR with the Auto Set Up function ·· 1-3
Step 6 : Setting the clock ······················································· 1-4
Selecting a language ······························································ 1-5
Presetting channels ································································ 1-5
Changing/disabling programme positions ····························· 1-6
Basic Operations ········································································ 1-8
Playing a tape ········································································· 1-8
Recording TV programmes ··················································· 1-9
Recording TV programmes using the ShowView system ··· 1-10
Recording TV programmes using the timer ························ 1-11
Additional Operations ····························································· 1-12
Playing/searching at various speeds ···································· 1-12
Setting the recording duration time ····································· 1-12
Checking/changing/cancelling timer settings ······················ 1-12
Searching using the Smart Search function ························· 1-13
Adjusting the picture ··························································· 1-14
Changing menu options ······················································· 1-14
Editing with another VCR ··················································· 1-15
Additional Information ···························································· 1-15
Troubleshooting ··································································· 1-15
Index to parts and controls ··················································· 1-16
2
DISASSEMBLY
2-1. CASE, FRONT PANEL BLOCK ASSEMBLY ·············· 2-1
2-2. KK-22 BOARD (SE300, SE450B/D/P),
JK-179 BOARD (SE300) ················································ 2-1
2-3. REAR PANEL ································································· 2-2
2-4. POWER BLOCK, MA-372 BOARD ······························ 2-2
2-5. MECHANISM DECK ····················································· 2-3
2-6. INTERNAL VIEWS ························································ 2-4
2-7. CIRCUIT BOARDS LOCATION ··································· 2-5
3
BLOCK DIAGRAMS
3-1.
3-2.
3-3.
3-4.
3-5.
OVERALL BLOCK DIAGRAM ···································· 3-1
VIDEO BLOCK DIAGRAM ·········································· 3-3
SERVO/SYSTEM CONTROL BLOCK DIAGRAM ····· 3-5
AUDIO BLOCK DIAGRAM ·········································· 3-7
POWER BLOCK DIAGRAM ········································· 3-9
4
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-1. FRAME SCHEMATIC DIAGRAM ································ 4-3
4-2. PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS ············································ 4-5
• MA-372 (VIDEO, AUDIO, SERVO/SYSTEM
CONTROL, TUNER, POWER SUPPLY)
PRINTED WIRING BOARD ························· 4-5
• MA-372 (1/10)(REC/PB HEAD AMP)
SCHEMA)TIC DIAGRAM ···························· 4-7
• MA-372 (2/10)(SECAM PROCESSOR)
SCHEMATIC DIAGRAM ······························ 4-9
• MA-372 (3/10)(VPD/PDC)
SCHEMATIC DIAGRAM ···························· 4-11
• MA-372 (4/10)(Y/C, AUDIO PROCESSOR)
SCHEMATIC DIAGRAM ···························· 4-13
• MA-372 (5/10)(SERVO/SYSTEM CONTROL)
SCHEMATIC DIAGRAM ···························· 4-15
• MA-372 (6/10)(USER CONTROL)
SCHEMATIC DIAGRAM ···························· 4-17
• MA-372 (7/10)(INPUT/OUTPUT)
SCHEMATIC DIAGRAM ···························· 4-19
• MA-372 (8/10)(C+ SWITCH)
SCHEMATIC DIAGRAM ···························· 4-21
• MA-372 (9/10)(TUNER)
SCHEMATIC DIAGRAM ···························· 4-23
• MA-372 (10/10)(POWER SUPPLY)
SCHEMATIC DIAGRAM ···························· 4-25
• JK-179 (LINE-2 IN)
PRINTED WIRING BOARD AND
SCHEMATIC DIAGRAM ···························· 4-27
• KK-22 (DIAL TIMER)
PRINTED WIRING BOARD AND
SCHEMATIC DIAGRAM ···························· 4-27
• POWER SUPPLY BLOCK
PRINTED WIRING BOARD ······················· 4-28
• POWER SUPPLY BLOCK
SCHEMATIC DIAGRAM ···························· 4-29
5
INTERFACE, IC PIN FUNCTION
DESCRIPTION
5-1. SYSTEM CONTROL — VIDEO/RP BLOCK
INTERFACE (MA-372 BOARD IC162) ························ 5-1
5-2. SYSTEM CONTROL — SERVO PERIPHERAL
CIRCUIT INTERFACE (MA-372 BOARD IC162) ······· 5-1
5-3. SYSTEM CONTROL — MECHANISM BLOCK
INTERFACE (MA-372 BOARD IC162) ························ 5-2
5-4. SYSTEM CONTROL — SYSTEM CONTROL
PERIPHERAL CIRCUIT INTERFACE
(MA-372 BOARD IC162) ··············································· 5-2
5-5. SYSTEM CONTROL — AUDIO BLOCK INTERFACE
(MA-372 BOARD IC162) ··············································· 5-2
5-6. SERVO/SYSTEM CONTROL MICROPROCESSOR
PIN FUNCTIONS (MA-372 BOARD IC162) ················ 5-3
5-7. MODE CONTROL PIN FUNCTIONS
(MA-372 BOARD IC420) ··············································· 5-5
6
ADJUSTMENTS
6-1. MECHANICAL ADJUSTMENTS ································· 6-1
6-2. ELECTRICAL ADJUSTMENTS ··································· 6-1
2-1. PREPARATION BEFORE ADJUSTMENT ··················· 6-1
2-1-1. Equipment Required ························································ 6-1
2-1-2. Equipment Connection ···················································· 6-1
2-1-3. Set-up of Adjustment ······················································· 6-1
2-1-4. Alignment Tape ······························································· 6-1
2-1-5. Input/Output Levels and Impedance ······························· 6-2
2-1-6. Adjustment Sequence ······················································ 6-2
2-2. POWER SUPPLY CHECK ············································· 6-2
2-2-1. Output Voltage Check (MA-372 Board) ························· 6-2
2-3. SERVO SYSTEM CHECK ············································· 6-3
2-3-1. RF Switching Position Adjustment (MA-372 Board) ····· 6-3
2-4. AUDIO SYSTEM ADJUSTMENT ································· 6-3
2-4-1. Normal Audio System Adjustment ·································· 6-3
2-4-2. ACE Head Adjustment ···················································· 6-3
2-4-3. E-E Output Level Check ················································· 6-3
2-4-4. Frequency Response Check ············································· 6-3
2-5. ADJUSTING PARTS LOCATION DIAGRAM ············· 6-4
7
REPAIR PARTS LIST
7-1. EXPLODED VIEWS ······················································ 7-1
7-1-1. FRONT PANEL AND UPPER CASE SECTION ·········· 7-1
7-1-2. CHASSIS SECTION ······················································· 7-2
7-1-3. MECHANISM DECK SECTION-1 ······························· 7-3
7-1-4. MECHANISM DECK SECTION-2 ······························· 7-4
7-1-5. MECHANISM DECK SECTION-3 ······························· 7-5
7-2. ELECTRICAL PARTS LIST ·········································· 7-6
—3—
SERVICE NOTE
1. ERROR CODE INDICATION
• Error codes are indicated using the lower 5 digits in the fluorescent display tube.
“At this time, Colon “:” between character is not indicated.”
Mode code indication when the error has occurred.
Error code
ERROR CODE
0
1
No error
Cam encoder error Loading direction
2
3
Cam encoder error Unloading direction
T reel error
4
5
S reel error
Capstan error
6
7
Drum error
Error on initializing
8
9
Cassette loading error
Reserve
MODE CODE
0
Power-on eject
10
FWD x1
20
REW play
1
2
Power-on initial
Power-off eject
11
12
FWD x2
CUE
21
22
Cas. loading
Tape loading
3
4
Power-off stop
FF
13
14
PB-pause
RVS-pause
23
24
Power-off loading
Mecha. error (Power on)
5
6
REW
REC
15
16
RVS x1
RVS x2
25
26
Power-on eject initial
Power-off eject initial
7
8
REC- pause
Power-on stop
17
18
REV
Power-off initial
27
28
APC REC
Cas. loading
9
PB
19
Mecha. error (Power off)
—4—
(No auto PB check)
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
SECTION 1
GENERAL
1-1
This section is extracted from instruction
manual. (SLV-SE100K/SX100K/SE400K/
SE450K model)(3-868-344-11)
1-2
1-3
1-4
1-5
1-6
1-7
1-8
1-9
1-10
1-11
1-12
1-13
1-14
1-15
1-16
1-17
MEMO
1-18E
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
SECTION 2
DISASSEMBLY
NOTE: Follow the disassembly procedure in the numerical order given.
2-1. CASE, FRONT PANEL BLOCK ASSEMBLY
1 Tapping screw
3 Upper case
4 Connector
2 Tapping screw
Hooks
5 Connector
Hooks
6 Panel block assembly
(Engaged by the hook.)
Hooks
Hooks
2-2. KK-22 BOARD (SE300, SE450B/D/P), JK-179 BOARD (SE300)
5 Two screws
(B2.6 × 8)
6 JK-179 board
7 Pin jack cover
2 KK-22 board
4 Dial timer escutcheon
1 Two screws
(B2.6 × 8)
3 Dial timer knob
Front panel assembly
2-1
2-3. REAR PANEL
2 Rear panel
(Engaged by the hook.)
Hooks
Hooks
Hooks
1 POWER code stopper
2-4. POWER BLOCK, MA-372 BOARD
4 Two screws
(Sumitite (B3) +BV)
2 Two screws
5 Two screws
(Sumitite (B3) +BV)
3 Power block
6 MA-372 board with
mechanism deck
1 One connector
2-2
2-5. MECHANISM DECK
3 Three connectors
6 Two screws
(BVTP 3 × 12)
4 Screw
(BVTP 3 × 12)
2 Screw
(BVTP 3 × 12)
0 Mechanism deck
1 Flexible board
9 MA-372 board
5 MD base (R)
8 MD base (M)
7 MD base (R)
2-3
2-6. INTERNAL VIEWS
— Top View —
M901
Drum Assembly
DZH-78E-R 1-772-359-11 (SE100A1/A2/K,SE200V1/V2,SE250B,SX100K)
DZH-92D-R 1-772-361-11 (SE200G/I,SE250D/P,SE300D1/D2/G,SX250D)
DZH-93D-R 1-772-362-11 (SE400K,SE450B/D/K/P)
ACE head block assembly
A-6775-791-A
Pinch press block assembly
A-6759-863-B
FE head
1-500-144-11
FL complete assembly
A-6759-619-B
Reel (T) table
3-977-508-01
Reel (S) table
3-977-507-01
— Bottom View —
M902
DC motor (capstan)
1-698-971-11
Rubber belt
3-977-510-01
M903
Cam motor assembly (LOADING)
X-3947-577-1
2-4
2-7. CIRCUIT BOARDS LOCATION
MA-372
VIDEO, AUDIO,
SERVO/SYSTEM CONTROL,
TUNER, POWER SUPPLY
JK-179 (SE300)
(LINE-2 IN)
POWER BLOCK
KK-22 (SE300, SE450B/D/P)
(DIAL TIMER (PUSH/TURN))
2-5
MEMO
2-6E
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
SECTION 3
BLOCK DIAGRAMS
3-1. OVERALL BLOCK DIAGRAM
MA-372 BOARD
IC162
(SEE PAGE 4-7,9,11,13,15,17,19,21,23,25)
SYSTEM
CONTROL
DRUM
SERVO
CN500
EXCEPT
SE100,SE400K,SX100K
MODEL
VIDEO
IN
OSD
AV LINK
AV CONT
LINE 1
OUT
V IN
8
19
SE300
MODEL
J481
D FG
DRUM
FG
CAPSTAN
SERVO
CAPSTAN MOTOR
LINE 3
OUT
EXCEPT
SE100,SE200,
SE400K,SE450K,
SX100K MODEL
IIC DATA
M
CAP FG
M902
CAPSTAN
MOTOR
CAPSTAN
FG
IIC CLK
CTL REC/PB
CTL
AMP
SE250B,SE450B MODEL
FRONT VIDEO
LINE 2
IN
TU700/701
OUT
MOD V
IC850
DRUM
PG
CAP VS
VPS/
PDC
JK-179
BOARD
D PG
IN
VHF/
UHF
10
CN570
M901
DRUM
MOTOR
M
IIC CLK
20
AV
LINK
D VS
CN500
IIC DATA
LINE 3
IN
(1/2)
EXCEPT
SE100,SE250P,SE400K,
SE450P,SX100K
MODEL
CN570
EXCEPT
SE100,SE200,
SE400K,SE450K,
SX100K MODEL
IC162
Y/C
PROCESSOR
3
TU M
(1/2)
V IN
19
TU VIDEO
20
A (L) OUT
MOD A
LINE 1
IN
V OUT
BUFF
IC200
CN500
DRUM MOTOR
(2/2)
IC970
(SEE PAGE 4-27)
IC130
SECAM
PROC.
CAM +,-
LOADING
MOTOR
AFT
M
M903
LOADING
MOTOR
TU VIDEO
VIDEO
HEAD
MODE1-4
ROTARY
SWITCH
PB Y/C
SP
CH 1
IC260
SP
CH 2
REC Y/C
AV CONT
AV
CONT
VIDEO
REC/PB
AMP
AV LINK I/O
LP
CH 1
SW12V
PH100
T REEL
Q VD
Q VD
IIC DATA
IIC DATA
IIC CLK
LP
CH 2
T REEL FG
S REEL FG
IIC CLK
PH101
S REEL
C SYNC
T SENS
Q101
T SENS
SE250,SE300,SE450B/D/P,
SX250D MODEL
CN500
AUDIO
IN
S SENS
JS582
L1 (L)
Q100
S SENS
TU M
CN500
6
LINE 1
IN
2
Q102
IC580
A (L)
T/S LED
C+
SWITCH
A (R)
DEC/VTR
DEC/VTR
SE100,SE200,SE400K,
SE450K,SX100K MODEL
EXCEPT
SE100,SE200,
SE400K,SE450K,
SX100K MODEL
D100
(T/S LED)
CN570
LED
DRIVE
REMOTE
JS581
LINE 3
IN
6
2
A (L)
ND420
REMOTE
CONTROL
RECEIVER
FLUORESCENT
INDICATOR TUBE
JS580
A (R)
SE100,SE200,SE400K,
SE450K MODEL
IC420
SIGNAL
CONTROL
+F
-F
FL
DRIVE
FLD SDA/CS
SE300
MODEL
IC460
JK-179
BOARD
J481
IC200
FR (L)
LINE 2
IN
(2/2)
IC161
AUDIO
PROCESSOR
(SEE PAGE 4-27)
JK-179 BOARD
EEPROM
FUNC KEY 1
A HEAD PB
IC350
REC/
PB
A HEAD REC
NORMAL
AUDIO
ERASE
HEAD
HEAD
SW
S460-464
(SEE PAGE 4-27)
S481,482
FUNCTION
KEY
FUNCTION
KEY
IC160
T380,Q380
POWER
FAIL DET
BIAS
ERASE
OSC
RESET
PULSE GEN
SE300 MODEL
S470,471,473,474,476,477
S478 (SE300)
FUNC KEY 2
FULL
ERASE
HEAD
FUNCTION
KEY
KK-22 BOARD
S401
DIAL TIMER
PUSH/TURN
(SEE PAGE 4-27)
16
SE300,SE450B/D/P MODEL
3-1
3-2
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
3-2. VIDEO BLOCK DIAGRAM
MA-372 BOARD (SEE PAGE 4-7,9)
Q510
AV
CONT
AV CONT
IC162 21
10
CN500
20
LINE 1
IN
16
15
11
TO AV LINK
IC162 73
LINE 3
IN
V IN
I
R
G
I CONT
IC162 25
C+ DET
IC162 60
BUFFER
7
11
16
H
IC200
(1/2)
40
G
38
SE250,SE300D1/D2,SE450B/D/P,
SX250 MODEL ONLY
I
IIC CLK
IC162 13
Q VD
32
CLP
36
CLP
34
CLP
VIDEO
AGC
31
IC200 ya REC
16
17
270mVp-p
H
CLP
CHARA
INS
6dB
AMP
KIL
B.D
27
NAP
BPF
Q661
P
LPF
YNR
2.1Vp-p
H
IC200 ql
44
46
IC260
H
47
CLP
42
BUFFER
P
61
53
59
55
4.4Vp-p
INV
PB-H 45
1H/2H
DL
PB
SECAM PROC
15 VIDEO IN
Q973
52
BUFFER
AMP
5
PB
5
C SYNC
R
R
24
3
2
7
COMP
PB
COMP OUT
17 PB C
MAIN
COMV.
FM
AGC
PB
EQ
R
P
4
AMP
DOUBLE
LIM
6
DEM
10
IC200 9, 0 REC
13 PB RF
B
500mVp-p
H
IC200 2 REC
REC
APC
PA
VXO2
P
520mVp-p
H
IC200 yd REC
PB
BGA-B
PB
BGA-A
70
R
IC200 5 REC
H
69
300mVp-p
IC200 yd PB
X200
4.43MHz
REC
BGA
H
300mVp-p
65
H
0.1µsec/div
REC
ATT
22
REC C
280mVp-p
VCO
10
REC Y RF
AGC
KIL
470mVp-p
2
9
5
REC H 11
62
REC C
60
SLD
REC Y RF REC
EQ
FM
MOD
MAIN
EMPH.
N.L
EMPH.
IC200 yl
DETAIL
ENH
96 REC H
1 12
4.43MHz
REC CUR ADJ
CHECK
2
PIN
5
28 REC CUR ADJ
TRICK H
CN262
PB RF
SE250B,SE450B
MODEL ONLY
Q204
RF SWP
AV ADJ
RF SWP
C ROT
A MUTE
99
97
95
SECAM
SW
CN262 1 PB RF
CN260 7 PB
IC260 9 REC
0.5Vp-p
V
0.1µsec/div
470mVp-p
CN262 2 RF SWP
IC260 0 REC
25Hz
100 TRICK H
5.0Vp-p
H
280mVp-p
A MUTE
IC162
63
C ROT
IC162
15
RF ENV
IC162
8
COMP OUT IC162
17
HA SWP
IC162
16
RF SWP
IC162
18
ADJ SW
S467
TO/FROM
SYSCON
BLOCK
(SEE PAGE 3-5)
16
3-3
3-4
IC162 86
SW
SECAM ON
IC162 67
TO/ FROM
SYSCON
BLOCK
(SEE PAGE 3-5)
11 REC C
CLP
BUFFER
17
AGC
DET
CTL 1
27 C SYNC
DE
EMPH
9
SUB
LPF
3
4
16
SECAM DET
Q972
Q202
REC
RF SWP
DET 26
21
BUFFER
BPF2
SUB
BPF
IC200 9, 0 PB
HA SWP
2 FSC
Q970
4.43
BELL
FILTER
Q974
Q200
HA
CONT
2
SW
Q201
SUB
COMV.
1
2
21
1
BACK UP
AMP
C
LPF
P
PB RF
ACC
AMP
P
R
PB
Q975,976
DL
EQ
BPF1
P
ENV RF ENV
6
DET
5
63
LPF
19
4
1
SE250B,SE450B MODEL ONLY
IC970
CLK IN 50
PIC
CONT
16
6
SP
CH1
LP
CH2
56 C VIDEO IN
P R
VIDEO REC/PB AMP
CN261
1H
DL
R
SYNC
SEP
19
BUFFER
Y/C
MIX
2.1Vp-p
H
Q660
OSD V OUT 52
Q203
12
R
50 OSD V IN
BUFFER
13
FBC 1/2
IC200 wg PB
19
EXCEPT
SE100,SE200,SE400K,
SE450K,SX100K MODEL
(1/3)
59 PDC DAV IN
SW3
1
CN480
CN570
V OUT
OSD
270mVp-p
H
25
CN501
LP
CH1
Q541
SW2
JK-179 BOARD
SP
CH2
SE250E,SE300D1/D2,SE450B/D/P,
SX250 MODEL ONLY
IC162
P
(SEE PAGE 4-27)
IC850
VPS/PDC
SERIAL
DECODER
IC200 ya PB
23
1
TO
TUNER
BLOCK
(SEE PAGE 3-6)
4 SCL
EXCEPT
SE100,SE250P,
SE400K,SE450P,
SX100K MODEL
6dB AMP
FRONT VIDEO IN
LINE 1
OUT
TU701 6
BUFFER
IC200 wg REC
LINE 2
IN
MOD V
9
DAVN
Q VD
R
DRUM
VIDEO
HEAD
IC162 71
5 SDA
CLP
6dB AMP
V IN
29
SE300
MODEL ONLY
J481
IIC DATA
14
R
MODEL ONLY
VIDEO
IN
IC162 72
SW1
FROM
TUNER TU701 24 TU VIDEO
BLOCK
C+ DET
8
20
CNJ500
FROM
SYSCON
BLOCK
(SEE PAGE 3-5)
Y/C PROCESSOR
R
17 CVBS
1.0Vp-p
Q540
B
15
EXCEPT
SE100,SE200,
SE400K,SE450K,
SX100K MODEL
AV LINK
19
Q850
C200 es,eh REC
TO/FROM
FROM AV LINK IC162 85
SYSCON
BLOCK
(SEE PAGE 3-5)
B
7
CN570
AV
LINK
V OUT
BUFFER
Q800-804
AV CONT
8
CN500
Q501,502
EXCEPT
SE100,SE400K,SX100K
MODEL
400mVp-p
LINE 3
OUT
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
3-3. SERVO/SYSTEM CONTROL BLOCK DIAGRAM
CN161
RESET
MA-372 BOARD (SEE PAGE 4-13,19)
DATA
IC162
D5V
1
VCC
1
L161
IC162
98 AMP VCC
(2/3)
OUTPUT
D VS
RESET
PULSE
GEN.
5
4.2Vp-p
300Hz
6
8
78 POWER FAIL
D PG
80 T REEL FG
90 DRUM PG
MOD V 6
MOD V
CN500 19
MOD A 2
MOD A
IC580 14
M OUT 21
TU M
IC580
CHECK
3
TO/FROM
VIDEO
BLOCK
(SEE PAGE 3-4)
M901
1
3
TO/FROM
AUDIO
BLOCK
(SEE PAGE 3-7,8)
19 SW1
20 SW2
EXCEPT
R731
SE100K,SE200V1/V2,
SE300G,SE400K,SE450K,
SX100K MODEL
3 SDA
12 SDA
T REEL
IC162 i; TAPE TOP PLAY
PH100
T REEL
FG
PG
EXCEPT
SE200G,SE300G
MODEL
TU SW1 83
TU SW2 84
SW12V
5 SCL
11 SCL
FG
4
4
D FG
89 DRUM FG
M12V
SW5V
CN102
U+
UV+
VM
7
7
VCC
1
1
TL
6
6
79 S REEL FG
SW5V
4.6Vp-p
450msec
PH101
S REEL
FG
IC162 ul
S REEL
TAPE TOP PLAY
5.0Vp-p
7 T SENS
S1
1.4sec
Q101
TAKE END
SENSOR
D5V
LIMITER
W+
D100
W-
T/S LED
U
5
W
5
2
2
3
3
CAP VS
24 CAP RVS
25Hz
13 D IN
FLD CLK 70
15 CLK
FLD CS 66
12 CS
LED
DRIVE
5.0Vp-p
M902
87 CAP FG
21
G6
26
LED
IRDREC
19
F+
F-
D5V
X160
17.734475MHz
IC162 ij CAP FG
G1
IC460
IC162 el (OUT)
CAP FG
ND420
VACUUM FLUORESCENT
INDICATOR TUBE
TO
POWER BLOCK
20 END LED
17.734475kHz
CAPSTAN
FG
43
S17 27
D420 (SE300,480)
Q100
SUPPLY END
SENSOR
Q102
76 CAP ERR
CAP RVS
FLD DATA 68
6 S SENS
IC162 og CTL IN+ REC
V
IC420
FL DRIVER
PS120
V-
CAPSTAN
MOTOR
23 AFT
40msec
3
TU VIDEO IC200 40
2
OUT
TU AFT 3
R733
POWER
FAIL
DET.
7
34 RST
4.6Vp-p
3
V OUT 24
IN
VHF/
UHF
4
Q103C
77 DRUM ERR
MATRIX
HALL
DEVICE
6
(EEP) IIC CLK 31
TU700/
TU701
EEPROM
IC160
IC162 o; DRUM PG
DRUM MOTOR
5
(EEP) IIC DATA 32
Q104
IC162 il DRUM FG
2
IC161
37 VCC
SERVO CONTROL
2
HALL
DEVICE
D160
99 AVCC
OUTPUT
M
L160
L140
D110
CN101
D161
CLOCK
SYSTEM CONTROL
D6V
MTR12V
(3/3)
REMOTE
CONTROL
RECEIVER
1
REMOCON 14
38 IN
3
39 OUT
5.0Vp-p
35 32kHz IN
CN350
757Hz
7
4.5Vp-p
IC162 eh 32kHz (OUT)
95 CTL +
X160
32.768kHz
CTL
HEAD
36 32kHz OUT
94 CTL -
6
FOR
CHECK
4
CN262
CTL
CN104
KKP+ 11
97 CTL AMP OUT
IC130
M903
LOADING
MOTOR
KKP- 12
SE300 ONLY
S101
LOADING
MOTOR DRIVE
REC
PROOF
S460,461,462
463,464
30 REC PRF
2 CAM -
1
M
3.1Vp-p
IN2 4
2
33 CAM
CAM
ENCODER
4
MECHA
POSITION
2
3
1
MODE1
MODE2
MODE2
MODE3
MODE3
MODE4
MODE4
FU KEY2 4
29 MODE1
Q800-804
AV CONT
TO AV LINK
FROM AV LINK
27 MODE3
ON PAL
26 MODE4
L660
OSC OUT 45
I CONT
25 I CONT
60 AV COUT IN/C+ DET
IIC CLK
IC200 14
Q VD
IC200 95
A MUTE
ADJ SW
CN262
TO
VIDEO
BLOCK
(SEE PAGE 3-4)
CN460
4
3
2
72 IIC DATA
C ROT
IC260 6
RF ENV
IC260 2
COMP OUT
IC260 3
HA SWP
16 HA SWP
MTR 12V CONT 64
IC200 99 ,IC260 4
RF SWP
18 RF SWP
SW 12V CONT 65
Q972 B
SECAM ON
TO
AUDIO
BLOCK
B
A MUTE
Q580 B
DEC/VTR
Q591
EJECT
CN402
4
3
2
DIAL TIMER
PUSH/TURN
15 C ROT
8 RF ENV
23.3MHz
4.6Vp-p
SE300,SE450B/D/P MODEL
17 ENV S
67 SECAM ON
86 SECAM DET
-14V CONT 74
C+5V CONT 75
MTR 12V CONT
SW 5V CONT
-11V CONT
TO
POWER BLOCK
(SEE PAGE 3-10)
C+SW 12V CONT
63 A MUTE
58 DEC/VTR
(SEE PAGE 3-7,8)
16
3-5
POWER
S410 (SE300,450,480)
71 IIC CLK
13 Q VD
IC200 97
IC970 26 SECAM DET
S481
KK-22 BOARD
KKP SW
5
IC162 rg OSC CHARA (OUT)
TO/FROM
VIDEO
BLOCK
(SEE PAGE 3-3,4)
S482
S470,471,473
474,476,477
S478 (SE300,480)
OSC IN 44
73 TO AV LINK
85 FROM AV LINK
C+ DET
IIC DATA
FUNCTION
KEY
NTSC PB
Q540 B
IC200 16 ,IC850 5
5
6
4.43
21 AV CONT
CN570 8
IC200 17 ,IC850 4
5
6
CN480
EXCEPT
SE100A1/A2 MODEL
28 MODE2
S467
Q501,502
(SEE PAGE 4-27)
CN501
POWER
EJECT
S100
MODE1
JK-179 BOARD
FUNCTION
KEY
FU KEY1 5
10 CAM +
3
3-6
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
3-4. AUDIO BLOCK DIAGRAM
MA-372 BOARD
SE100,SE200,SE400K.
SE450K MODEL
(SEE PAGE 4-9,11)
JS580
SE250,SE300,SE450B/D/P,
SX250D MODEL
IC580
MOD A
C+ SWITCH
FROM
TU701 21
TUNER BLOCK
TU M
TU701 2
TO
TUNER BLOCK
(SEE PAGE 3-6)
EXCEPT
SE100,SE200,SE400K,
SE450K,SX100K MODEL
EXCEPT
SE100,SE200,SE400K,
SE450K,SX100K MODEL
1
15
(SEE PAGE 3-6)
A (L) OUT
FL572
3
LINE 3
AUDIO
2
A (R) OUT
CN570
1
Q591
3
4
5
FROM
SYSCON
BLOCK
A MUTE
IC162 63
MUTE
(SEE PAGE 3-5)
12
14
FL502
A (L) OUT
3
LINE 1
AUDIO
13
A (R) OUT
11
9
10
JS581
SE100,SE200,SE400K,
SE450K,SX100K MODEL
Q581
Q580 Q582
FROM
SYSCON
BLOCK
IC162 58 DEC/VTR
(SEE PAGE 3-5)
IC200
SE300
MODEL
JK-179
BOARD
J481
LINE2
AUDIO
(2/2)
AUDIO
PROCESSOR
24 A SW CTL 1
CN480
FR (L)
CN501
3
26 A SW CTL 2
3
(SEE PAGE 4-27)
REC
EQ
94
90
CN500
6
LINE 1
IN
2
A (L)
93
PB:
LP,SP
FL500
P
R
LINE
AMP
MUTE
81
92
A (R)
91
ALC
74
76
CN570
EXCEPT
SE100,SE200,SE400K,
SE450K,SX100K MODEL
6
LINE 3
IN
2
A (L)
FL570
98
88
CN350
89
4
IC350
PB LOW OUT
REC
AUTO
BIAS
86
85
83
REC:EP,LP
PB:EP
87
HEAD
2
4
SW
3
AUDIO
ERASE
HEAD
VREF
80
A (R)
AUDIO
REC/PB
HEAD
REC
78
1
CN351
FULL
ERASE
HEAD
1
T380,Q380
Q350
BIAS
ERASE
OSC
BIAS
SW
16
3-7
3-8
CN500
1
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
POWER SUPPLY BLOCK
22 VCC
7 16 1 14 25
CN101
D201
AC
IN
F001
LINE
FILTER
+35V
4
R711
SWITCH
CN600
5
POWER
TRANS
L001,002
Q720,721
PS603
T101
CN001
30V
30V
SECAM
L975
(SEE PAGE 4-29)
BB (5V)
TU700/701
IC970
MB (5V)
SE250B,SE450B MODEL
(SEE PAGE 4-21,27)
5V
MA-372 BOARD
5V
(701 ONLY)
3-5. POWER BLOCK DIAGRAM
5
L720
SW 5V COUT
L721
Q751,752
L750
SW
IC580
RECT
IC162
C+ SW
L580
IC601
D301
Q612,613
L301
6
7
8
D401
L401
9
Q101
D601
10
+13V
+13V
+13V
D+6V
D+6V
12V
2
REG
1
6
7
C+ 12V
SWITCH
16 VCC
D750
10 MODE CONT
SW 12V
65 SW5V CONT
L701
SE250,SE300,SE450B/D/P,
SX250D MODEL
4
8
C+ 12V
SERVO/SYSTEM
CONTROL
64 MTR12V CONT
75 C+/SW12V CONT
C+/SW 12V CONT
9
10
53 OSD VCC
MTR 12V
SWITCH
SWITCHING
REG.
D607
PHOTO
INTERRUPTER
Q103,104
MTR 12V CONT
D603
C+ VCC
SWITCH
IC200
Q600,604,611
5V
REG
IC160
Y/C PROC
AUDIO PROC
L202
PS600
C+ 5V
SW 5V
L203
L204
OSD VCC
RESET
5 VCC2 PULSE
GEN.
39 ALWAYS 5V
11 Y VCC
L161
58 C VCC
56 CCD VCC
POWER
7 VCC1 FAIL
DET.
6
34 RESET
IC460
8
REMOTE
CONTROL
RECEIVER
78 P FAIL
3 VCC
75 A VCC
L350
IC161
EEPROM
IC260
VIDEO
R/P AMP
T380,Q380
ERASE
OSC
98 AMP VCC
SWITCH
L205
JS603
99 AVCC
L140
D606
D+6V
EXCEPT
SE250,SE300,SE450B/D/P,
SX250D MODEL
Q607,608
PS602
D140
L160
37 VCC
SE250,SE300,
SE450B/D/P,
SX250D MODEL
PC101
74 -11V CONT
L662
Q601,603
L380
IC420
L460
FL DRIVER
8 VCC
1 VDD
L270
13 ALL 5V
44 VDD
16 VEE
IC850
IC350
VPS/PDC
PH100,101
HEAD SW
19 VDD D
20 VDD A
T/S
REEL
VCC 1
Q100,101
T/S
SENSOR
D100
T/E LED
Q800-804
AV LINK
CIRCUIT
17 VEE
EXCEPT
SE100,
SE250P,
SE400K,
SE450K,
SX100K
MODEL
ND420
FLUORESCENT
INDICATOR TUBE
F+
EXCEPT
SE100,
SE400K,
SX100K
MODEL
F-
PS120
Q602,605,606
11
-11V
PS601
11
L601
SWITCH
MTR 12V
–11V
M903
1
7
CAPSTAN
MOTOR
IC130
+F
16
LOADING
MOTOR DRIVE
–F
8 VCC1
9 VCC2
-11V CONT
3-9
CN102
SW 5V
3-10
D110
M901
CN101
MTR 12V
1
DRUM
MOTOR
MEMO
3-12E
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
SECTION 4
PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
THIS NOTE IS COMMON FOR PRINTED WIRING
BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is
printed in each block.)
(For printed wiring boards)
• b: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
• Through hole is omitted.
• Circled numbers refer to waveforms.
• There are few cases that the part printed on diagram
isn’t mounted in this model.
• Chip parts.
Transistor
Diode
C
B
E
6 5 4
4 5 6
4
1 2 3
3 2 1
3 2 1
5
1
3
2
5 4 3
2
3
1
2
3
1
2
1
(For schematic diagrams)
• All capacitors are in µF unless otherwise noted. pF : µµF.
50V or less are not indicated except for electrolytics and
tantalums.
• Chip resistors are 1/10W unless otherwise noted.
kΩ=1000Ω, MΩ=1000kΩ.
• Caution when replacing chip parts.
New parts must be attached after removal of chip.
Be careful not to heat the minus side of tantalum capacitor, Because it is damaged by the heat.
• Some chip part will be indicated as follows.
Example
C541
L452
22U
10UH
TA A
2520
Kinds of capacitor
Temperature characteristics
External dimensions (mm)
• Constants of resistors, capacitors, ICs and etc with XX indicate
that they are not used.
In such cases, the unused circuits may be indicated.
• Parts with ★ differ according to the model/destination.
Refer to the mount table for each function.
• All variable and adjustable resistors have characteristic curve B,
unless otherwise noted.
• Signal name
XEDIT → EDIT PB/XREC → PB/REC
• 2 : non flammable resistor
• 1 : fusible resistor
• C : panel designation
•
: internal component.
• U : B+ Line.
• V : B– Line.
• Circled numbers refer to waveforms.
• Readings are taken with a color-bar signal input.
• Voltage are dc between ground and measurement points.
• Readings are taken with a digital multimeter (DC10MΩ).
• Voltage variations may be noted due to normal production
tolerances.
• C : adjustment for repair.
• Circled numbers refer to waveforms.
When indicating parts by reference
number, please include the board name.
Note :
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
4-1
MA-372 BOARD
(REC/PB BLOCK)
1 CN262 1 PB RF
9 IC200 es,eh REC
w; IC162 ij CAP FG
qf IC200 wg REC
IC260 7 PB
1.0Vp-p
0.5Vp-p
V
H
2 CN262 2 RF SWP
25Hz
2.3Vp-p
H
0 IC200 ya REC
320mVp-p
2.2Vp-p
H
25Hz
5.0Vp-p
T REEL
0 IC200 ya PB
3 IC260 9 REC
4.8Vp-p
wa IC162 og CTL IN+ REC
qf IC200 wg PB
H
5.0Vp-p
757Hz
ws IC162 i; TAPE TOP PLAY
(SERVO/SYSTEM CONTROL
BLOCK)
240mVp-p
H
0.1µsec/div
qg IC162 eh 32kHz (OUT)
200mVp-p
440msec
REEL
wd IC162 ul STAPE
TOP PLAY
qa IC200 yd REC
4 IC260 0 REC
5.0Vp-p
3.1Vp-p
qh IC162 el
H
300mVp-p
H
5.0Vp-p
17.734475kHz
(OUT)
400mVp-p
1.4sec
qa IC200 yd PB
(VIDEO BLOCK)
wf IC420 2 X OUT
5.6 Vp-p
5 IC200 5 REC
qj IC162 rg OSC CHARA (OUT)
300mVp-p
H
470mVp-p
0.1µsec/div
3.3MHz
qs IC200 ql
6 IC200 2 REC
23.3MHz
5.6Vp-p
qk IC162 o; DRUM PG
4.6Vp-p
H
H
300mVp-p
qd IC200 9, 0 REC
5.0Vp-p
40msec
7 T380 6 REC
ql IC162 il DRUM FG
H
70kHz±10kHz
46Vp-p
460mVp-p
qd IC200 9, 0 PB
300Hz
8 IC200 yl
650mVp-p
H
4.43MHz
410mVp-p
4-2
5.0Vp-p
3.3Vp-p
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
4-1. FRAME SCHEMATIC DIAGRAM
2
1
3
4
CN600
A
11P
5
6
7
8
-11V
11
10
6V
10
9
6V
9
8
13V
8
7
13V
7
6
13V
6
5
35V
5
4
AU GND
4
3
AN GND
3
2
AN GND
2
1
LP CH2 F
1
AN GND
1
2
LP CH1,2 S
B
1/10
2/10
3/10
4/10
5/10
6/10
7/10
8/10
9/10
MA-372 BOARD
CN161
3P
C
2
3
CN262
FR-81
CLOCK
3
DATA
2
D GND
1
6P
BOARD IN
CN501
FRONT VIDEO IN
FRONT VIDEO IN
1
3P
JK-179
BOARD
2
AN GND
3
FRONT AU IN
4
AU GND
5
POWER SW
6
EJECT SW
AN GND
2
FRONT AU IN
3
AU GND
4
POWER SW
5
EJECT SW
6
DI-58
M903
LOADING
MOTOR
M902
CAPSTAN
MOTOR
(SE300,SE450B/D/P ONLY)
CN402
KK-22
BOARD
4P
BOARD IN
CN460
LP CH1 F
3
SP CH2 F
SP CH2 F
4
5
SP CH1,2 S
6
SP CH1 F
SP CH1,2 S
LP
CH1
5
SP
CH2
6
SP CH1 F
AV ADJ
5
CTL
4
GND
3
RF SWP
2
7
CTL(X)
CTL(X)
1
PB RF
1
6
CTL(Y)
CTL(Y)
2
5
GND(AU)
GND(AU)
3
4
A HEAD PB
A HEAD(X)
4
A HEAD REC
A HEAD(Y)
5
FAC-8
CN350
7P
M
4P
M
B to B
3
2
N.C.
2
2
GND(AU)
GND(AU)
6
3
CAM(+)
3
1
A ERASE HEAD
A ERASE HEAD
7
9P
CTL
HEAD
AUDIO
HEAD
ERASE
HEAD
FE-138
B to B
CN351
3P
1
SW 5V
1
1
FE HEAD
2
CAP RVS
2
2
N.C.
FULL ERASE(X)
1
3
CAP FG
3
3
GND(AU)
FULL ERASE(Y)
2
4
CTL-REF
4
5
CAP VS
5
6
LIMITTER
6
FULL
ERASE
HEAD
FFM-36
CN101
5P
4
KKP SW
KKP SW
4
7
MTR 12V
7
1
MTR 12V
1
3
KKP +
KKP +
3
8
MTR GND
8
2
D VS
D VS
2
2
KKP -
KKP -
2
9
AN GND
9
3
D PG
D PG
3
1
D GND
D GND
1
SE300,SE450B/D/P ONLY
F
LP CH1 F
4
1
CN102
E
3
CAM(-)
1
D
LP
CH2
2
LP CH1,2 S
6P
CN104
1
VIDEO HEAD
1
LP CH2 F
SP
CH1
(SE300 ONLY)
CN480
6P
5P
RP
CHECK
SE300 ONLY
6P
4
1
AC
12
4P
RC
WRITING
NC
11
REC/PB HEAD AMP
SECAM PROCESSOR
VPS/PDC
Y/C,AUDIO PROCESSOR
SERVO/SYSTEM CONTROL
USER CONTROL
INPUT/OUTPUT
C+ SWITCH
TUNER
CN261
RESET
AC
10
B to B
11
POWER
SUPPLY
BLOCK
AC IN
220-240V
50HZ
9
MTR 12V
4
D FG
D FG
4
5
MTR GND
MTR GND
5
M
M901
DRUM
MOTOR
16
4-3
4-4
FRAME SCHEMATIC DIAGRAM
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
MA-372 (VIDEO, AUDIO, SERVO/SYSTEM CONTROL, TUNER, POWER SUPPLY) PRINTED WIRING BOARD
There are few cases that the part printed on this diagram isn’t mounted in this model.
MA-372 BOARD
D100
D100
D140
D424
D500
D504
D509
D511
D513
D515
D540
D542
D544
D571
D575
D576
D600
D601
D602
D603
D606
D607
D750
D751
D-7
H-3
B-10
A-3
I-3
I-3
J-2
I-4
I-4
J-4
J-7
I-6
I-6
I-5
I-5
I-6
E-2
E-2
E-2
F-2
B-3
B-13
J-12
J-12
IC130
IC160
IC161
IC162
IC200
IC260
IC260
IC420
IC460
IC580
IC601
IC970
B-3
B-13
C-12
C-10
F-9
I-10
I-10
A-8
A-5
I-11
G-2
H-5
Q100
Q101
Q102
Q103
Q104
Q200
Q201
Q202
Q204
E-11
E-3
D-6
B-10
B-10
H-7
G-8
E-8
H-7
Q270
Q271
Q350
Q380
Q501
Q502
Q510
Q510
Q540
Q541
Q580
Q581
Q582
Q583
Q600
Q601
Q603
Q604
Q605
Q606
Q607
Q608
Q611
Q612
Q613
Q660
Q661
Q702
Q720
Q721
Q750
Q751
Q752
Q800
Q801
Q802
Q803
Q804
Q850
Q970
Q971
Q972
Q973
Q974
Q975
Q976
I-8
J-9
H-10
H-9
I-3
I-3
I-4
I-4
I-6
I-6
G-12
H-12
H-12
I-11
E-2
G-2
F-3
E-2
E-2
D-2
F-1
G-2
E-2
F-2
F-2
D-9
D-11
G-12
C-1
D-1
J-12
H-12
H-12
C-9
C-8
C-9
C-8
C-9
F-11
G-5
H-5
F-5
G-5
F-5
G-5
G-5
VIDEO, AUDIO, SERVO/SYSTEM CONTROL, TUNER, POWER SUPPLY
MA-372
4-6
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
For schematic diagram
• Refer to page 4-2 for waveforms.
2
1
3
5
6
7
8
9
10
REC/PB HEAD AMP(RP BLOCK)
11
C285
0.01u
B
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
MA-372 BOARD(1/10)
A
4
1
CN262
XX MARK:NO MOUNT
L270
100uH
R280
100k
B+
VIDEO HEAD
IC260
LP CH2
JL261
SIGNAL PATH
D
R270
*
VIDEO SIGNAL
CHROMA
R1.0/P0
Y
JL262
Y/CHROMA
C272
*
C271
*
C270
XX
REC
R2.5/P0
12
H.SYNC
11
10
ATT
R4.3/P0.1
R274
*
R286
R275
XX
R3.5/P0
C281
0.01u
B
C282
0.01u
B
8
R0/P1.7
CTL
5
AV ADJ
RECCUR
RECYRF
Q270
XX
CSYNC
C289
18p
C284
0.22u
B
6
R0/P1.6
CTLCHK
LP/SP_
JL268
RFENV
JL269
RFSWP
SE300 G/D1/D2,
SE250 B/D/P,
SE200 G,SX250D
SE200 V1/V2,
SE100 A1/A2,
SX100K
C271
0.01u/50V B
R1.7/P2.1
R277
22k
0
R278
22k
R0/P0.5
R279
22k
HASW
4
COMPOUT
SW30
R4.3/P4.4
H
ADJSW
L
R1.0/P2.0
C288
100p
CH
1
C272
0.01u/25V B
XX
IC260
LA70011
LA70001
R270
560
R272
2700
R274
4700
5600
R276
8200
15k
3 TO(6/10)
B+
SW5V
C286
XX
XX
2 TO(5/10)
5
0.3
ANGND
SE450 B/D/K/P
SE400K
1 TO(4/10)
PBRF
TRICKH
19 TO(10/10)
Q271
XX
*MARKED:MOUNT TABLE
F
4
FOR
CHECK
L271
2.2uH
R283
0
16
JL267
R276
*
3
7
100
PB
E
GND
RECC
C283
0.01u
B
9
AGC
13
15
14
AGC
DET
VCC
RF SWP
3
3
R1.0/P2.0
2
5P
2
C273
XX
JL260
PB RF
RECH
1
C274
XX
HA
6
R3.6/P0
1k
SP CH1 F
R3.9/P2.0
SP
6
JL272
R3.5/P0
PB OFF
SW30
AMP REC
SP OFF
EP OFF
EP
TO HA
H.SYNC
HA
ENVELOPE
CONT
DET
5
4
COMP
SP CH1.2 S
R2.5/P0
VCC
5
C275
0.01u
B
VCC
4
C276
0.1u
B
BIAS
SP CH2 F
R3.9/P0
C277 XX
R271
560
AMP
VCC
4
JL263
CURRENT
AMP
3
BIAS
LP CH1 F
10k
3
JL264
AMP
2
CURRENT
AMP
LP CH1.2 S
PB OFF
REC
SP OFF
EP OFF
AMP 10k
2
R3.9/P2.0
16
1
17
LP CH2 F
18
1
19
SP CH1
JL265
20
C
6P
21
CN261
R1.5/P2.0
C278
0.022u
B
22
C279
0.1u B
R4.0/P0
23
JL273
ALL 5V
PB ON
REC OFF
5.0
R272
*
SP CH2
JL271
R273 0
24
B
LP CH1
JL270
1
2
REC/PB HEAD AMP
IC260
*
C280
100u
6.3V
12
R284
0
R285
XX
C287
XX
XX
1800
1200
MA-372
VIDEO, AUDIO,
SERVO/SYSTEM CONTROL,
TUNER, POWER SUPPLY
JK-179 (SE300)
(LINE-2 IN)
POWER BLOCK
KK-22 (SE300, SE450B/D/P)
(DIAL TIMER (PUSH/TURN))
4-7
4-8
REC/PB HEAD AMP
MA-372 (1/10)
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
For schematic diagram
• Refer to page 4-5 for printed wiring board.
2
1
3
MA-372 BOARD(2/10)
4
5
6
7
8
9
10
(SE450B,SE250B ONLY)
SECAM PROCESSOR(SE BLOCK)
A
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
CSYNC
SEDET
VIDEO
Q975
PDTA114EK-115
SWITCH
0
0
L975
10uH
R998
10k
0
R0/
P4.3
C994
0.01u
B
R982
47k
0
R978 8200
SW5V
0
C995
10u
16V
PB3V
L970
C980
0.1u
B
R981
27k
R980 100k
0
R979 10k
150p
CH
4700p B
C979
JL972
R971
33k
C
R968 150k
R970
33k
R0.6/
P0
6.8uH
4700p B
C971
C970
220p
CH
C978
2.2u
B
C972
50V
B+
Q970
2PB709AR-115
4.43
BELL FILTER
C977
0.01u
B
C981
0.01u
B
R997
10k
Q976
PDTC144EK-115
SWITCH
0
5.0
SEON
0
Q972
PDTA114EK-115
SWITCH
4
B+
SECAMON
27
26
25
24
23
22
21
20
19
18
17
16
R989
1k
15
VCC
SYNC GATE
GEN./V-SEP
1REF
VR
2.2M
BPF
X2
4.3M
BPFB
X2
FO
ADJ.
CR
FO
OFFSET
1.1MHZ
OSC
P
REC
MUTE
BGP
GEN
IC970
1/4
R
P
R
Filter Adj.
B
SYNC
GATE
P
1.1M
BPF
1REF
B
REC
4.2V
10
11
12
C988
100p
CH
SYNC
GATE
LIM
VR
IC970 *
B+
AFC
C993
0.01u
B
R0.6/
P3.4
PBC
Q973
2PD601AR-115
BUFFER
P
4.3MHZ
BPFA
R
CONTROL
LOGIC
4.43MHZ
VCO
MODE
CTL to REC MUTE
to PB MUTE
FO
ADJ.
PB
MUTE
P
AGC
AMP
AGC
AMP
13
14
to SECAM DET
R
from
LIM
D
R
4.3MHZ
OSC
SECAM
DEF
CR
to MUTE
L973
47uH
R/P
B
C992
0.01u
B
0
0
JL975
0
0
0
0
0
0
0
0
0
0
0
R0.1/
P0
0.3
0
28
R993
8200
R994
39k
ANGND
PBRF
SECAM PROCESSOR
RECC
0
FSC
JL974
SIGNAL PATH
R988
10k
C991
0.1u
B
PB
0
0
L974
XX
Y
REC
R995
10k
R3.4/
P0.1
R990
0
R999
0
Q974
2PD601AR-115
BUFFER
R996
39k
C987
0.47u
B
C986
10u
16V
VIDEO SIGNAL
CHROMA
C996
10p CH
C985 100p CH
Q971
XX
C983
0.001u
B
R969
6800
R991
XX
L972
47uH
4-9
0
0
470
R985
XX
R987
C984
0.01u
B
JL973
XX
R984
R975
0
5600
27uH
L971
B
680p
47k
47k
R977
R986
C982
2200p
C976
16
MA-372 (2/10)
CH
2700
0.022u
B
1u
C974
C975
R976
0.01u
C973
B
22k
R974
B
F
R983
JL970
R973
220k
R972
27k
SECAM PROCESSOR
9
0
8
0
7
0
6
0
5
0
4
0
0
3
JL971
E
2
0
0
1
0
GND
C989
XX
C990
XX
R992
XX
4-10
Y/CHROMA
TO(4/10)
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
For schematic diagram
• Refer to page 4-5 for printed wiring board.
2
1
3
MA-372 BOARD(3/10)
A
4
(EXCEPT:SE100 A1/A2/K,SX100K,
SE250 P,SE400K,SE450P)
VSP/PDC(VP BLOCK)
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
IICCLK
5 TO(5/10)
IICDAT
PDCDAV
5.0
3
2
1
VSSA
4
VSSD
VCS
5
N.C.
N.C.
IC850
C
6
SCL
7
DAVN
5.0
8
SDA
9
CS
10
EHB
5.0
B
IC850
SDA5650X-GEG
N.C.
VDDD
VDDA
16
17
18
19
20
2.5
R2.5/P0
R857
6800
C853
0.033u
B
R860
1.2M
R858
6800
D
R859
1.2M
C852
2200p
B
C851
10u
50V
24 TO(10/10)
C850
0.1u
F
JL852
BUFFER
VIDEO
DGND
R850
100
R852
22k
R2.7/
P2.8
28 TO(4/10)
R861
680k
R856
100k
C856
0.1u
F
Q850
2PB709AR-115
2.1
R851
15k
E
5.0
CVBS
15
5.0
IREF
14
R1.2/P0.9
VCO 1
13
R2.6/P0
1.4
12
PD 2
PD 1
11
N.C.
TI
VSP/PDC
C854
R853
1k
B+
R862
2200
C855
0.22u
B
XX
D5V
SIGNAL PATH
F
VIDEO SIGNAL
CHROMA
Y
Y/CHROMA
REC
PB
G
16
4-11
VSP/PDC
MA-372 (3/10)
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
For schematic diagram
• Refer to page 4-5 for printed wiring board.
• Refer to page 4-2 for waveforms.
• Refer to page 4-31 for mounted table.
2
3
1
4
5
6
7
8
9
10
11
12
13
14
15
16
MA-372 BOARD(4/10)
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
18
19
SIGNAL PATH
Y/C,AUDIO PROCESSOR(VI BLOCK)
A
17
VIDEO SIGNAL
B+
B+
CHROMA
C+5V
AUGND
Y
Y/CHROMA
AUDIO
SIGNAL
REC
B+
SW5V
PB
C03
ACE HEAD
AUDIO
HEAD
7P
JL353
A ERASE HEAD
1
2
AU GND
2
3
A HEAD REC
3
4
A HEAD PB
4
5
AU GND
5
6
CTL (Y)
6
R233
*
3.8
C201
1u
50V
C205
* CH
R1.2/
P1.9
R200
10k
R206
*
R205
330
Q200
2PD601AR-115
AMP
C207
27p
CH
R2.4/
P2.5
16
7
CTL (X)
5.1
L204
10uH
L203
10uH
0
1.8
2.5
R0/
P2.5
5.1
5.1
3.3
R3.9/
P3.5
3.3
49
47
46
45
43
44
R217
*
42
41
40
39
34
32
R225
C246
2.2k
0.01u
B
Q203
2PB709AR-115
BUFFER
R1.4/P0
R0/
P4.3
C231
1u B
R0/
P2.0
JL215
CSYNC
R0/
P3.1
R2.9/
P0
C232
1u B
R0/
P3.4
C235
1u B
C233
0.1u B
RECC
R226
1.8k
PBRF
C256
XX B
C247
0.01u B
C248
47u 16V
C237
L205
0.1u
10uH
B
C234
0.01u B
5.1
R1.8/
P0
PBC
C249
10u
16V
R221
47
R222
*
C236 C241
*
47p CH
C250
47u 16V
17 TO(9/10)
VIDEO
28 TO(3/10)
E01
0
R2.0/
P0
TUNERV
B+
E05
R1.4/
P1.6
R0/
P1.8
R223
*
C239
* CH
C242
C251
*
22u 50V
E02
1.9
R2.1/
P0
E01
C240
*
R2.9/
P3.0
L1VIN
E02
C252
1u B
DECVIN
E03
R224 JL216
2.2k
L1VOUT
E04
26
R218
0
27
28
R219
47
29
FRONTVIN
30
C229
0.1u
B
SEON
B+
SEDET
L202
10uH
FROMOSDV
TOOSDV
C209 C210
180p 27p
CH
CH
R209
1.8k
R210
560
Q201
2PD601AR-115
DEEMPH
C220
47u
16V
E03
C228
390p
CH
E04
R229
XX
R230
XX
R231
XX
C243
0.047u
B
11 TO(5/10)
C05
B01
JL200
QVD
B02
JL144
B04
JL145
B05
JL146
AMUTE
CROTVI
RFSWP
CTL_X
CLK
JL202
CTL_Y
DATA
JL203
4-13
7 TO(7/10)
DECVOUT
E05
C238
10u
50V
JL214 R0/
P4.8
25
R0/
P2.2
24
0.1
R0/
P0.8
R215
100
SEON
2.3
R2.9/
P3.0
4 TO(2/10)
VIDEO
SYNC
DET
23
R0/
P2.0
22
SEDET
R2.1/P2.0
1.4
CLAMP5
JL213 R0/
P2.5
21
R0/
P1.7
Y-GND
20
19
SECAMON
7
Y/C, AUDIO PROCESSOR
MA-372 (4/10)
48
R213 R214
470 470
M-Emph
FILT.
18
R0/
P1.4
17
VIDEO
AGC
6dB
AMP
6dB
AMP
JL354
CTLGND
18 TO(5/10)
50
C217
0.01u
C224
0.01u
B
B
B
C215
0.01u
R0/
P3.5
R0/
P3.3
0
16
6dB
AMP
JL212 R0/
P0.1
C218
0.01u
B
15
R0/
P0.3
14
FBC
Chara
INS.
JL211
C208
1u
50V
13
JL210 R0/
P1.1
12
R0/
P5.0
11
1.5
10
B+
9
5.0
Y-Vcc
EQ
CTL
9
R
N.L.
De-EM
12 14
SYNC
SEP
FMAGC
DET
R216
*
Q204
*
SECAM
SW
SERIAL
DECODER
CLAMP
0
8
B
R204
330
DHP
NC
R
P
R0.6/
P3.4
7
6
CLAMP4
PIC
CONT
P
SUB
LPF
F
R4.0/
P0
5
AGC
TC2
R9.3/
P9.4
B01
K
REG
R
Y/C
MIX
BPF
JL355
CTL
HEAD
CLAMP2
SW1
C244
0.01u
B
C245
0.1u
B
R0/
P2.0
D03
CN350
1
P
13
ACC
DET
FILT
L200
39uH
0
0
KIL
B.D.
1 23 4
C230
0.1u
F
C06
1
3 4
OSD
SW2
SW3
C255
0.01u
B
2
FE HEAD
FBC
C221
* B
N.C.
1
ALWAYS 5V
M1 2 3
R1.8/
P1.9
0.1u
2
R
R
P
C219
3
AFC
FILT
R0/
P0.8
JL217
3P
AU GND
JL352
ERASE
HEAD
4
R1.9/P1.3
FULL ERASE HEAD
J
3
R2.3/
P0
R0.1/
P2.6
R228
0
CN351
2
C253
*
CH
CSYNC
3
R227
C200
0
0.01u
B
L206
*
RECC
CLAMP
CLAMP1
DETAIL
ENH
5.1
BAL
TC1
N.L.
EMPH
DEMOD
5
PB
EQ
JL206
I
DOUBLE
LIM
D04
PBRF
P
ACC
AMP
P
R0.1/
P1.5
TRICK H
OUT
D03
D04
REC
EQ
FM
AGC
1
RECYRF
B-UP
AMP
R232
*
PB LOW OUT
D02
RECCUR
LPF
38
87
88
89
C ROT IN
D01
1 TO(1/10)
VCA
R
NAP
Main
EMPH
FM
MOD
6
RECH
P
RECH OUT
H
TRICKH
YNR
CLAMP3
3.0
R4.3/
P4.4
R236
47k
R
KIL
R2.4/
P2.5
D01
PB-H OUT
37
85
R0.8/
P0.9
B05
ASWCTL2
CLK IN
BPF1
R
JL208
C06
R0.7/
P0
FSC
36
82
83
84
R235
47k
SW5V
3Fsc
1H
D.L
P
R234
XX
JL356
R4.3/
P0
JL201
PB3V
B+
51
D.L
EQ
C-LPF
R207
*
B04
C05
ASWCTL1
86
0
D02
ANGND
52
1H/2H
D.L
P
R208 L201
4.7k 100uH
R370
12k
R3.4/
P1.2
P
P
R
VIDEO
PEAKING
4
53
1/2
PB:LP.SP
R1.7/
P1.6
3
R2.3/
P0
JL358
54
10
R
R0/
P1.6
2
0
B02
55
LPF
R
94
C367
0.01u
B
VCO
REC
BGA
Main
CONV
Sub
BPF
C206
0.047u B
LINEOUT
C370
XX
Sub
CONV
EQ
AMP
C204
0.01u
C04
R2.3/
P0
R3.1/
P2.3
PB
5.1
REC
PB
BGA-B
PB
BGA-A
R
P
3.0
C+TU_M
6 TO(8/10)
5
P
AUTO
BIAS
R1.9/
P2.0
C03
6
vcc
1
C02
FRAUIN
7
0
R367
R365
6.8k
330k
C366
1u
JL357
R368
820
50V
B
ACC
DET
JL207
C01
L1AUIN
G
8
2.4
R366
10k
REC
1.9
HEAD SELECTOR
2.4
C364
10u
50V
56
95
IC350
R371
18k
57
D.L
EQ
11
RA
BPF2
96
7
IC350 BA7755AF-E2
F
2.4
58
TH
REC
AMP
REC-EP.LP
PB-EP
59
COMB
90
C382
0.01u
B
R0.8/
P0
R0.8/
P5.1
C363
C362
4.7u
47u 16V
50V
R364
C365
270
0.01u B
MUTE
P
A-GND
91
R381
3.9k
R2.0/
P5.1
C359
C360
1500p B 1500p B
LINE AMP
60
INV
REC
APC
REC
APC
REC
APC
Vref
97
R380
47
R0.4/
P0
R363
18k
98
1
7
R2.2/P5.1
R382
1
6
2.4
2.4
R2.0/
P0
C381
0.01u B
R4.8/P5.1
Q380
2SD879-AA
BIAS
ERASE
OSC
2
C380
0.047u
PET
R383
180
R362
1.2k
R2.1/P5.1
5
C358
1u B
Q350
2SC1815GR-TPE2
BIAS SW
3
E
R358
1.8k
2.3
61
SLD
KIL
DET
ALC
62
AMP
8
SW1
R
63
VXO1
92
C383
47u
16V
8
4
0
R361
XX
R359
4.7k
ALC
DET
MUTE
64
JL361
L380
100uH
99
T380
BIAS
OSCILLATION
2.3
81
R360
XX
JS350
XX
93
C04
65
C-GND
SECAM
DET
4 321
100
D
66
R220
1k
R237
XX
35
67
VXO2
C357
4.7u
50V
R357
8200
C212
0.047u
B
R212
1.2k
C214
0.1u B
R211
8.2k
68
2.1
JL209
69
Q202
2PD601AR-115
BUFFER
2.1
33
70
0
2.7
R4.0/
P4.1
71
5.1
2.7
31
A-Vcc
72
5.1
C203
0.047u
B
X200
4.433619MHz
R202 XX
C202
0.01u B
0.6
73
B+
C227
47u
6.3V
CCD GND
74
R0/
P2.0
2.3
75
ALC
DET
Vref
2.3V
C350
0.22u B
JL359
76
R0/
P2.5
5.1
2.3
77
R201
XX
R351
R353
*
78
REC
Ref.signal
C225
47u
6.3V C226
0.01u
B
C223
0.1u
F
C-Vcc
79
C222
1u
B
NTSC:H
80
0
Y/C PROCESSOR
AUDIO PROCESSOR
IC200
LA71562M-MPB
B+
C352
0.1u F
R354
2.2M
R356
5.6k
C355
0.22u B
C353
*
B
C356
33u 16V
2.4
IC200
R0/
P2.3
C
C213
1u
B
C216
0.022u
B
C211
1u
B
R203
1.8k
R350
68k
SIGNAL PATH
5.6k
JL360
L350
100uH
R355
68k
C354
10u 50V
R352
*
ANGND
B
C351
47u
16V
C02
C01
20 TO(10/10)
IICCLK
IICDAT
4-14
REC/PB
PB
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
For schematic diagram
• Refer to page 4-5 for printed wiring board.
• Refer to page 4-2 for waveforms.
• Refer to page 4-31 for mounted table.
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
MA-372 BOARD(5/10)
SERVO/SYSTEM CONTROL(SS BLOCK)
R142
1.2k
XX MARK:NO MOUNT
1
2
3
L160
22uH
B+
D5V
D5V_BACKUP
B+
OSDVCC
SS73
SS83
SS84
SS85
SS86
SS89
SS87
SS90
C162
0.22
5.5V
F
C164
100u
16V
C165
0.01u
B
(CAP DOUBLE LAYER)
R2.6/P4.4
R0/P5.0
K
9
CAM(+)
0.3
VCC 1
R13.6/P13.5
VCC 1
R13.6/P18.6
VCH
R4.8/P5.0
VCL
IN2
R2.2/P2.4
IN1
CAM(-)
R0.3/P0
V REF
6.3
8
10
R133
47k
R0/P5.5
5.0
M903
LOADING MOTOR
CN104
JL131
C130
XX
C134
0.01u
B
R131
XX
3P
1
CAM(-)
1
2
CAM(+)
2
3
CAM(+)
3
C131 C132
47u
XX
16V
D130
XX
M902
CAPSTAN MOTOR
JS130
PS120
0.4A
M
JL133
CN102
JL121
R123
4.7k
9P
1
SW 5V
1
2
CAP RVS
2
3
CAP FG
3
4
CTL-REF
4
5
CAP VS
5
6
LIMITTER
6
7
MTR 12V
7
8
MTR GND
8
9
AN GND
9
JL122
JL123
R124
470
SS76
JL124
R121
47k
R120
47k
C120
0.01u
B
M
JL125
R122
XX
C121
0.01u
B
JL127
JL128
SS72
C122
47u
16V
C124
XX
SS71
C123
0.01u
B
JL129
SS70
R5.0/P4.9
SS68
4.9
SS67
5.0
SS66
3.9
SS65
4.9
SS64
5.0
SS63
C113
0.01u
B
C115
0.1u
F
JL115
JL114
SS77
JL113
R114 C107
47k 47u
16V
JL199
B+
C670
1u B
R663
1.5k
5
D.FG
4
3
D.PG
3
2
D.VS
2
1
MTR 12V
1
M
R668
100
R664
0
R104
1k
SS52
R1.9/P2.6
R667
330
C671
22p
CH
R669
100
0.4
5.0
R666
0
0
JL108
1.7
JL107
SS06
B+
5.2
R108
22k
R103
22k
C669
0.0039u
B
2.0
JL111
MTR GND
4
B+
SS58
0
R0/P0.2
C108
1u
B
5
SS59
R5.0/P5.1
2.0
JL112
R115
47k
5P
D110
MPG06D-6052PKG3
SS60
R196
3.3k
0
CN101
SS90
0
0
M901
DRUM MOTOR
C114
0.01u
B
SS89
D100
GL528V1
(T/E LED)
Q100
C102
RPT-37PBT3 0.001u
(S SENS)
B
R2.6/P2.7
R106
39
1/4W
R107
39
1/4W
5.0
C103
330u
6.3V
R105
2.2k
JL661
JL109
C105
0.001u
C104
XX
Q102
2SC1815GR-TPE2
LED DRIVE
(T/E LED)
B
Q101
RPT-37PBT3
(T SENS)
SS20
SS07
Q660
2PB709AR-115
B+
B+
R102
15k
C665
*
JL104
SS30
*
R662
470
R661
1M
PH101
GP3S120S
(S REEL)
S101
(REC PROOF)
R670
470
R1.9/
P2.0
C672
0.01u
B
Q661
2PB709AR-115
BUFFER
”¯˚
C100
0.001u
B
JL118
PH100
GP3S120S
(T REEL)
JL116
JL105
SS79
C667
0.01u
B
(MODE)
S100
R100
15k
JL117
R101
470
1/4W
C101
0.001u
B
C666
560p
CH
JL106
SS80
SS29
SS28
SS27
C668
100u
6.3V
SS26
JL168
B+
JL169
L662
22uH
L663
22uH
B+
B+
SW12V
SW5V
ANGND
ANGND
B+
B+
MTR12V
7
R130
15k
R132
470
MTR(GND)
SS91
6
SS73
R182
470
R183
470
R185
0
R180
6.8k
R181
3.3k
R5.0/P0
B+
SW5V
5
SS74
B+
SW12V
SS77
SS75
R1.9/P2.0
JL660
0
1.7
R2.5/
P0
0
DMS +
DMS -
TU SW1
TU SW2
SECAM DET
FROM AV LINK
CAP FG
2.3
R0/P2.3
JL662
0
C133
0.01u
B
0
0
5.0
0
2.4
2.4
AMP VSS
DRUM FG
DRUM PG
AMP VREF OUT
JL165
0
R179
470
R177
470
R178
470
0.2
2.5
2.5
R2.9/P2.4
2.4
R1.9/P2.4
AMP VREF IN
RC CHECK
CTL IN-
CTL IN+
AMPC
X160
C170
0.1u
B
R170
3.3k
SS87
2.6
C673
XX
R671
0
R673
10k
SS24
SS78
SS76
R2.6/
P2.0
SS50
TO(10/10)
C663
0.01u
B
JL160
JL161
SS78
21
C660
C662
18p
0.0047u
CH C661 B
18p
CH
SS79
R5.0/P2.6
7
8
R5.0/P5.1
DATA
4
J
5.0
R665
XX
C664
0.1u
B
6
IC161
M24C08-WMN6T W.ENA
5.0
CLK
5
SS75
3
SS65
PCONT_SW5V
C+/SW12VCONT
2
1
-11VCONT
R5.0/P5.1
B+
R184
0
R672
SS48
SS74
OSD W LEVEL
L661
*
C167 C169 C171
15p C172
0.047u 22p
B
CH 15p
CH
C168
CH
22p
CH
EEPROM
SS64
R5.0/P5.1
8
C166
0.01u
B
IC161
I
PCONT_M12V
R171
10k
C163
0.01u B
SS12
KKP-
R189
1k
R169
470k
330
SS04
7
1
2
SS05
SS11
KKP+
17
R660
1k
FUKEY2
OSD V OUT
L660
2.2uH
FUKEY1
5.0
OUT 1
R5.0/P5.1
VCC 1
R4.8/P5.0
OUT 2
R5.0/P5.1
VCC 2
6
TO(6/10)
SS70
R168
150k
5
10
SS68
3
FLDCS
FLDSDA
16
4
JL130
R5.0/P5.4
5.0
3
SS33
R805
*
R806
*
2
SS80
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
SS66
R5.2/P5.3
SS14
FLDSCLK
2.4
REC PRF
RESET,PULSE GEN
POWER FAIL DET
IC160
MM1256XF-BE
4
H
CTL AMP OUT
MODE1
IC160
REMOCON
AVCC
OSD VCC
R176
B+
HLF(SLICER LPF)
MODE2
L161
22uH
5.0
Q804
*
R804
*
R1.9/
P2.0
R0/P5.3
MODE3
15
1
R802
*
OSD V IN
SS30
OSD SECAM C IN
OSD GND
R0/P5.0
C V IN(C SYNC IN)
MODE4
LP
SS29
I CONT
OSD LPF
0
NUA
CAP RVS
NUB
0
SS28
DEC/VTR_
OSC CHARA(OUT)
SS27
PDC DAV
FULL ERS
OSC CHARA(IN)
0
AF REC P
2.1
SS59
PDCDAV
0
SS26
AV CONT IN/C+ DET
AV CONT
2.1
IICCLK
SS25
DIV CLOCK OUT/JOGLED CONT
END LED
JL164
SS71
5.0
TA MUTE
AF SWP
1.5
SS72
IICDAT
SS24
A MUTE
RF SWP
R5.0/P5.1
SS67
MTR12V CONT
ENV S
CLK SEL
5.0
FLD CS
SW5V CONT
NICAM DATA
2.4
SS21
SECAM ON
HA SW
NICAM CLK
SS20
TO FLD DATA
IC162
*
CROT
VSS
R2.2/P2.9
REMOCON
17.734475MHz(out)
SS18
18V CONT OUT
SERVO/SYSTEM CONTROL
17.734475MHz(in)
R0/P0.5
QVD
VCC
0
SS17
IC162
KKP -
32KHz(out)
R2.1/P2.9
SS16
SS86
SEON
G
R0/P5.0
SS13
QVD
TO(3/10)
0
SS14
SS15
SEDET
5
5.0
SS13
FLD CLOCK
JL163
F
-14V CONT
KKP +
17.734475MHz
SS63
AMUTE
CROTVI
SCL(VI/HF/TU/NICAM.ZWEI/MOD/VPS/DNR)
X161
FROMOSDV
TO(4/10)
MOD CONT
1.5
SS52
SDA(VI/HF/TU/NICAM.ZWEI/MOD/VPS/DNR)
IIC CLK1(EEP)
11
R167
6.8k
SS50
TOOSDV
TO AV LINK
AF ENV
4.8
SS71
IICCLK
RF ENV
C+5V CONT
19
32KHz(in)
5.0
R162
10k
SS15
SS72
IICDAT
T SENS
CAP ERR
JL162
RFSWP
S SENS
IIC DAT1(EEP)
SS18
FU KEY1
RESET
5.0
SS11
SS12
DRUM ERR
R0/P1.6
R166
*
R165
*
SS10
SS85
IC130
LOADING MOTOR DRIVE
JL103
SS08
R813
*
JL102
SS60
TO(4/10)
LB1943N
JL101
5.0
R801
*
B+
SS07
E
JL140
5.0
SS25
23
P FAIL
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
5.0
S REEL
18
4.5
SS06
AVLINK
20
R5.0/P5.1
SS21
AVCONT
FU KEY2
T REEL
21
R5.0/P5.1
C+DET
TO(7/10)
TU AFT
5
9
DEST2
4.7
6
ICONT
JL167
C160
0.01u B
C161
0.01u B
SS04
DEST1
R1.2/P0.1
R164
10k
SS03
SS05
D
R803
*
4.4
Q803
*
7
SS18
RFSWP
0.6
0
Q801
*
22
8
SS16
4.5
Q802
*
D800
*
9
SS97
CTLCHK
JL166
4
R160
*
R161
*
30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
SS17
COMPOUT
HASW
5.0
5.0
R163
10k
RFENV
TO(1/10)
24V CONT
SS48
SS08
2
Q800
*
R5.0/P5.1
4.5
R5.0/
P5.1
100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81
C
IC130
EXCEPT:SE400K,SE100D1/A2/K,SX100K
R800
*
R807
*
4.8
SS63
LP/SP_
C801
*
B
5.0
Q104
2PB709AR-115
POWER ON/OFF
18
CTL_Y
CTLGND
R4.4/
P4.3
R0/
P4.3
C148
0.01u
B
SS58
AMUTE
SS91
SS97
C149
220u
16V
C142
0.022u B
R111
47k
R110
2.2k
0
Q103
PDTC144EK-115
SWITCH
DEC/VTR_
TO(8/10)
4.5
C150
4.7u
50V
SS65
PCONT_SW5V
JL141
C146
2200p
B
C173
680p
B
JS140
32.768kHz
SS03
C144 C145
22u 100u
50V 16V
B+
SS10
TUAFT
AMP VCC
IICDAT
C141
0.01u
B
C140
100u
16V
R5.0/
P0
SS72
MODCONT
14
B+
SS71
IICCLK
B
C143
22u
50V
L140
22uH
CAM
TUSW2
TO(9/10)
R143
4.7k
B+
D140
1SS355TE-17
2.2
SS84
SS33
SS83
TUSW1
12
JL143
CTL_X
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
JL100
A
MTR12V
MTRGND
D5V
MTRGND
B+
DGND
CN161
OPEN
L
4P
RESET
4
CLOCK
3
DATA
2
D GND
1
SIGNAL PATH
REC
Drum speed servo
16
Drum phase servo
REC/PB
PB
Note :
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
Drum servo (speed and phase)
Capstan speed servo
Capstan servo (speed and phase)
Ref.signal
4-15
4-16
SERVO/SYSTEM CONTROL
MA-372 (5/10)
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
For schematic diagram
• Refer to page 4-5 for MA-372 board printed wiring board.
• Refer to page 4-27 for KK-22 board printed wiring board.
• Refer to page 4-2 for waveform.
2
1
3
4
5
6
7
8
9
10
11
12
13
MA-372 BOARD(6/10)
USER CONTROL(FR BLOCK)
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
16
17
18
19
20
21
22
R420
0
R421
0
R423
0
FLDCS
FLDSDA
E
B-
C424
10u
16V (5L)
R426
470
1/10W
FLDSCLK
B-
-11V
-F
+F
22 TO(10/10)
C425
XX
B+
D420
SLR-342VCT31
D421
1SS355TE-17
D5V
JL420
DGND
F
SE300 ONLY
ANGND
3 TO(1/10)
ADJSW
EJECTSW
EXCEPT;SE100 A1/A2
D424
STZ6.8N-T146
G
R470
10k
H
R463
1.5k
JL461
JL460
S460
JL462
S461
ON/STANDBY
R464
2.2k
JL463
REC
R466
0
R467
0
R468
27k
R469
47k JL467
JL464
BR 3
COM
2
MK 1
PB
NTSC
4.43
NTSC
ON
PAL TV
S464
S463
S462
EJECT
R465
3.3k
5
R460
10k
R462
1k
4
R461
330
S467
S2
POWERSW
S1
15 TO(7/10)
(REW)
TRACKING+
EXCEPT;SE300
R471
330
R472
1k
JL470
R473
0
JL471
R474
3.9k
R475
2.7k
R476
4.7k
JL474
JL473
R477
6.8k
R478
15k
JL476
R479
47k
JL477
SE300 ONLY
JL478
16
USER CONTROL
MA-372 (6/10)
4-17
S470
S471
STOP
PLAY
S473
(FF)
S474
(PAUSE)
S476
TRACKING-
S477
AUTO SET UP
(RF CHANNEL)
S478
SYNCHRO REC
4-18
1
2
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
P17
N.C.
G6
G5
G4
G3
G2
G1
F+
F+
FLUORESCENT INDICATOR TUBE
15
4
14
5
13
6
12
FUKEY1
7
31
30
29
27
26
↓
P3
8
R-9.1/P-6.8
S10
↑
P1
P2
9
R-2.4/P-0.1-2.4
S9
25
KKP-
F-
27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
R-6.9/P0
S8
AN0
-9.1
G3
F-
30 29
R-6.9/P0
S7
33
R-6.9/P0
S6
-9.1
G4
REMOCON
FUKEY2
32
0
S4
R2.0/P0
S5
-11.3
S3
AN1
KKP+
10 TO(5/10)
28
1
C429
XX
AN2
24
R425
0
R-6.9/P-6.8
S16
23
D
R422
1k
JL412
R-4.6/P-4.5
S15
-9.1
G5
-9.1
G2
1
R-4.6/P-0.1
S14
R-9.2/P-9.1
G6
-9.1
G1
D GND
JL411
-11.3
S13
AN3
N.C.
2
-11.3
S12
AN4
-11.3
LED2 (IRDREC)
KKP-
JL410
-11.3
S11
-11.3
S17
LED1(RR)
3
IC420
M35500BGP
AN5
R-11.4/P-11.3
VEE
KKP+
TIMING GENERATOR
R-11.4/P-11.3
VEE
4
IC420
RESET
C428
XX
ND420
24
4.9
CLK
JL409
KKP SW
R424
0
2.1
X IN
11
*
C427
47u
16V
34
R5.0/P0
C422
0.1u
B
L460
47uH
VSS
D OUT
KK-22 BOARD
R427
47
2
C460
XX
3
1
JL416
C421
22p
CH
35
5
D GND
JL415
2.1
X OUT
6
2
S1
36
7
KKP-
3
37
8
3
2
38
9
KKP+
1
7
6
JL414
39
10
4
40
R5.0/P5.1
VDD
4
JL413
KKP SW
C
CN460
GND
5.0
VCC
5.0
OUT
5D
4E
1B
*
C420
47u
6.3V
(5L)
2
CN402
3A
B+
B
41
-11.3
S2
C423
0.01u
B
42
R-2.4/P0
S1
S410
DIAL TIMER
PUSH/TURN
43
D IN
SE450 B/D/P,SE300 ONLY
44
R5.0/P5.1
VDD
IC460
SIRCS RECEIVER
IC460
RPM6940
R4.0/P3.9
CS
R4.9/P0
A
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
For schematic diagram
• Refer to page 4-5 for MA-372 board printed wiring board.
• Refer to page 4-27 for JK-179 board printed wiring board.
2
1
3
5
4
6
7
8
9
10
11
12
13
14
R543
*
MA-372 BOARD(7/10)
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
INPUT/OUTPUT(IO BLOCK)
A
C541
XX
XX MARK:NO MOUNT
R541
*
ANGND
25 TO(10/10)
C+12V
MA-372 BOARD (7/10)
*MARKED = MOUNT TABLE
R542
*
Q541
*
BUFFER
1.6
0.8
D540
*
B+
CN570
AUGND
R548
B
Q540
*
CONT SW
DECVIN
L1VIN
R547
*
L1VOUT
D542
*
0
0
C572
0.0047u
B
FRONTVIN
FL570
*
C
R570
*
R571
*
D571
*
R545 *
*
R546
D576
*
D544
*
FL572
*
D
C570
0.0047u
B
R572
*
D570
*
R574
*
C571
0.0047u
B
D575
*
L510
100uH
E
8 TO(9/10)
MODV
C512
47u
16V
C511
47u
16V
C510
0.01u
B
R11.9/
P3.6
R2.4/
P2.5
Q510
2PB709AR-115
BUFFER
R1.7/P1.8
9 TO(5/10)
C+DET
19
V OUT
18
SW GND
17
SW GND
16
I
15
R
14
SW GND
13
SW GND
12
N.C.
11
G
10
N.C.
9
SW GND
8
C+DET
7
B
6
A(L) IN
5
SW GND
4
A GND
3
A(L) OUT
2
A(R) IN
1
A(R) OUT
CN500
R5-1/
P5.0
21
SW GND
20
V IN
19
V OUT
18
SW GND
17
SW GND
16
I
15
R
14
SW GND
13
SW GND
12
N.C.
11
G
10
AV_LINC
9
SW GND
8
AV CONT
7
B
6
A(L) IN
5
SW GND
4
A GND
3
A(L) OUT
2
A(R) IN
JL540
0
Q502
R515
1k PDTC144EK-115
AV CONT SW
D515
STZ6.8N-T146
C502
0.0047u
B
D511
PDZ6.8B-115
D514
UDZ-TE-17-13B
E2AUIN
E2AUOUT
16 TO(8/10)
FL500
D512
UDZ-TE-17-13B
L1AUIN
R501
470
L1AUOUT
R500
470
B
C500 0.0047u
FRAUIN
D500
STZ6.8N-T146
FL502
SE300 ONLY
D508
R502
4700
PDZ6.8B-115
H
CN501
*
JL543
FRONT VIDEO IN
AN GND
FRONT AU(L) IN
AU GND
I
1
2
D505
PDZ6.8B-115
1
D504
STZ6.8N-T146
JL544
DECODER/
LINE-3 IN
DECODER/
ENTREE
LINE-3
R517
75
R513
XX
R3.6/
P11.9
AVCONT
*
D513
STZ6.8N-T146
AVLINK
G
V IN
JL541
R11.9/
P12.0
Q501
PDTA114EK-115
AV CONT SW
ICONT
C513
470u
6.3V
R512
75
R514
330
R516
4700
F
SW GND
20
R511
150 1/4W
R510
*
B+
21
JL542
R549
*
0
DECVOUT
7 TO(4/10)
*
21P
LINE-1(TV)
LIGNE-1(TV)
SE250, SE300D1/D2,
REF.NO SE450B/D/P,
SE300G
SX250D
CN570
21P
D540
STZ6.8N-T146
D542
STZ6.8N-T146
D544 UDZS-TE17-6.8B
D570
UDZS-TE17-6.8B
D571
STZ6.8N-T146
D575
STZ6.8N-T146
D576
UDZS-TE17-13B
FL570
a
FL572
a
Q540
2PB709AR-115
Q541
2PB709AR-115
R510
180
R541
100
R542
180
R543
150
R545
33k
R546
47k
R547
1k
R548
75
R549
75
R570
470
R571
470
R572
470
R574
100k
SE100, SE200,
SE400, SE450K,
SX100
✕✕
✕✕
✕✕
✕✕
✕✕
✕✕
✕✕
✕✕
✕✕
✕✕
✕✕
✕✕
150
✕✕
✕✕
✕✕
✕✕
✕✕
✕✕
✕✕
✕✕
✕✕
✕✕
✕✕
✕✕
A(R) OUT
CNJ500
XX
JL545
3
4
POWER SW
5
EJECT SW
6
D509
XX
JL546
15 TO(6/10)
EJECTSW
JL547
POWERSW
S481
SIGNAL PATH
EJECT
VIDEO SIGNAL
S482
J
ON/STANDBY
CHROMA
5
AU GND
FRONT AU IN
AN GND
K
FRONT VIDEO IN
4
3
2
1
1
C493
XX
3
JL483
JL482
C494
XX
2
2
6
JL481
1
EJECT SW
AUDIO
SIGNAL
PB
6P
POWER SW
Y/CHROMA
REC
R491
XX
D491
STZ6.8N-T146
CN480
Y
JL480
D493
PDZ6.8B-115
J481
2P
C481
XX
MGND 4
L
1
SW 5
R480
XX 3
2
VGND 2
D481
STZ6.8N-T146
AUDIO
MONO 3
V1
V
VIDEO
LINE-2IN
JK-179 BOARD
XX MARK:NO MOUNT
L
16
4-19
4-20
INPUT/OUTPUT
MA-372 (7/10)
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
For schematic diagram
• Refer to page 4-5 for printed wiring board.
2
1
3
MA-372 BOARD(8/10)
5
6
7
8
9
10
11
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
C+ SWITCH(AU BLOCK)
A
4
JL584
14 TO(5/10)
AMUTE
JL589
DEC/VTR_
JL588
13 TO(9/10)
JL581
JL587
JL582
JL586
TU_M
MOD_A
JL585
R580
1k
B
E2AUIN
FRAUIN
16 TO(7/10)
L1AUOUT
L1AUIN
SE100,SX100K,SE200,
SE400K,SE450K ONLY
L1AUIN
SE100,SX100K,SE200,
SE400K,SE450K ONLY
JS580
0
R581
4700
E2AUOUT
FRAUIN
C+TU_M
ASWCTL2
6 TO(4/10)
ASWCTL1
LINEOUT
JS581
0
C582
10u
50V
C581
10u
50V
C583
10u
50V
C580
10u
50V
C
C588
10u
50V
EXCEPT:SE300G
IC580
R586
100k
R585
100k
C+ SWITCH
Q580
PDTC144EK-115
C585
10u
50V
SE250,SX250,SE300,
SE450 B/D/P ONLY
C586
10u
50V
Q591
2PD601AR-115
MUTE
SE250,SX250,SE300,
SE400 B/D/R ONLY
0
R587
100k
R589
XX
R590
1k
R593
100k
0
EXCEPT:SE300G
Q581
PDTC144EK-115
SWITCH
0.1
Q582
PDTC144EK-115
SWITCH
5
3
6.4
6.4
6.4
4
2
1
V CC
15
16
12.1
14
6.4
13
6.4
12
6.4
11
6.4
12.1
12.1
10
12.1
9
0.1
R595
2200
C587
10u
50V
6.4
SIGNAL PATH
12.1
B+
R584
10k
F
6
C584
0.1u
B
R12.1/
P0
E
7
D590
1SS355TE-17
7.1
12.1
R583
10k
8
Q583
2PD601AR-115
R582
10k
MC14053BFEL
12.1
IC580
D
0
0
6.4
INDERTER
R594
10k
L580
100uH
AUDIO
SIGNAL
R596
15k
EXCEPT:
SE300G
REC
ANGND
27 TO(10/10)
16
C+ SWITCH
MA-372 (8/10)
C+12V
D591
1SS355TE-17
B+ JL580
PB
AUGND
4-21
4-22
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
For schematic diagram
• Refer to page 4-5 for printed wiring board.
3
4
TU701
MA-372 BOARD(9/10)
6
7
8
9
SE100K,SE200V1/V2,SE400K,SE450K,SX100K
BTF-3MU604
12
7
9
10 11 12 13 14 15 16 17 18
19 20 21 22 23 24 25
1
2
3
4
5
6
8
7
9
Y
V OUT
AFT
SIF
M OUT
SW2
SW1
IF
TP
30V
N.C.
AUDIO
SIGNAL
Y/CHROMA
19 20 21 22 23 24
REC
PB
100
R755
R705
470
100
5V
10 11 12 13 14 15 16 17 18
R754
R704
470
B+
MODV
B+
B+
B+
TO(4/10)
N.C.
SDA
SCL
N.C.
N.C.
RF AGC
30V
MOD V
SCL
MB(5V)
SDA
MOD A
5V
V OUT
AFT
SIF
M OUT
SW2
SW1
IF
IF
30V
N.C.
5V
N.C.
SDA
SCL
N.C.
N.C.
RF AGC
8
17
16
VIDEO SIGNAL
JL703
6
30V
MOD V
SCL
5
D
17
15
CHROMA
JL702
4
OUT
(SORTIE)
B+
TO(7/10)
14
SIGNAL PATH
AERIAL
ANTENNA
JL704
3
C
8
13
EXCEPT SE100K,SE200V1/V2,SE400K,SE450K,SX100K
JL705
JL752
B
2
JL754
1
MB(5V)
OUT
(SORTIE)
SDA
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
11
IN
(ENTREE)
AERIAL
ANTENNA
MOD A
XX MARK:NO MOUNT
10
TU700
IN
(ENTREE)
TUNER(TU BLOCK)
BB(5V)
A
5
BB(5V)
2
JL753
1
B+
C710
22u
50V
EXCEPT
SE100K,SE400K
SX450K,SX100K
B+
B+
JS754
XX
TUNERV
B+
E
ANGND
SW30V
23
TO(10/10)
SW5V
D6V
C+12V
B+
B+
B+
Q752
2PB709AR-115
B+
B+
B+
B+
F
JS753
XX
IICDAT
IICCLK
POWER CONTROL
5.0
4.9
JS752
R733
470
R731
470
R756
10k
TO(5/10)
TUSW2
R4.2/
P0.1
R757
1k
EXCEPT:SE200G,SE300G
TUSW1
12
R5.0/
P5.1
B+
L751
XX
JS751
0.1
MODCONT
TUAFT
Q751
PDTC144EK-115
PCONT_SW5V
B+
Q720
2SA1309A-QRSTA
POWER CONTROL
JL706
R34.0/P33.9
R34.8/P34.6
13
R701
XX
MOD_A
TO(8/10)
0.7
R725
22k
R702
0
TU_M
C701
10u
50V
I
0
R703
XX
4-23
D750
S1G-G2P
L701
2.2uH
L750
2.2uH
R751
XX
5.8
B+
5.0
Q750
XX
JL700
L721
22uH
C754
470u
6.3V
C755
XX
L720
68uH
C707
XX
C721
22u
50V
16
R726
100k
C720
XX
2.3
Q702
XX
C706
XX
R724
3.3k
0
Q721
2PD601AR-115
SWITCH
R34.7/P34.6
H
SWITCH
R723
100k
L700
XX
0
JL701
D702
MTZJ-T-77-33
R711
390
1/4W
B+
C704
10u
50V
C705
0.047u
B
C708
47u
16V
R714
470k
C709
0.01u
B
D751
XX
G
R713
100
C750
XX
C702
XX
C751
XX
D752
XX
EXCEPT:SE100K,SE200V1/V2/G,SE300G,
SE400K,SE450K,SX100K
C752
100u
16V
C753
0.1u
B
C700
XX
4-24
TUNER
MA-372 (9/10)
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
For schematic diagram
• Refer to page 4-5 for printed wiring board.
2
1
3
4
5
6
7
8
9
10
11
12
MA-372 BOARD(10/10)
C+12V
AUGND
XX MARK:NO MOUNT
NO MARK:REC/PB MODE
R :REC MODE
P :PB MODE
IC601
PQ12RD08
GND
3
AU GND
4
35V
5
13V
6
13V
7
13V
8
6V
9
6V
10
-11V
11
JS601
0.60mm
R627
XX
12V
GND
CONT
C+5V
2.8
12.1
ANGND
R618
1800
C614
XX
-11VCONT
C612
0.01u
B
C613
100u
16V
R617
1k
PCONT_SW5V
C+/SW12VCONT
MTR12V
MTRGND
SW5V
JS600
*
JL602
C620
0.1u
B
ANGND
OSDVCC
JL606
JL604
PS600
1A
JL605
R601
1k
1/4W
D601
1SS355TE-17
5.8
R615
820
Q607
2SB1122-ST-TD
SWITCH
R610
220
1/4W
5.8
C607
0.01u
B
C606
XX
5.1
5.8
D5V_BACKUP
D607
S1G-G2P
4.4
5.8
R609
220
1/4W
D602
PDZ5.1B-115
Q604
2SC2785TP-FEK
SWITCH
R11.1/P11.2
5.8
E
D5V
R611
1k
C605
10u
50V R608
560
1/4W
D600
1SS355TE-17
R11.1/
P5.8
5.8
PS602
0.25A
0.1
Q608
PDTC144EK-115
SWITCH
DGND
C621
XX
DGND
D5V
D603
S1G-G2P
JS603
SE250,SE300,SE450B/D/P,
SX250D
D606
S1G-G2P
D5V
DGND
R622
2.7
1/2W
R613
22
3W
R623
5.6
1/2W
ANGND
JL612
+F
5.8
L601
10uH
C602
XX
C603
22u
50V
R-11.5/
P11.5
R-10.8/
P10.7
R-11.4/
P11.4
Q602
2SD774-T-4
SWITCH
0
R602
47k
R614
10 1W
JL607
-11V
JL421
JL610
D6V
5.8
JL616
Q606
PDTC144EK-115
SWITCH
R606
6800
C+12V
SW5V
PS603
0.25A
ANGND
SW30V
G
SIGNAL PATH
16
Note :
VIDEO SIGNAL
CHROMA
Y
Y/CHROMA
AUDIO
SIGNAL
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
REC
H
PB
MA-372 (10/10)
4-25
22 TO(6/10)
-F
JL613
Q605
PDTA114EK-115
SWITCH
0
5.0
JS602
XX
PS601
0.4A
24 TO(3/10)
EXCEPT: SE250,SE300,
SE450B/D/P,
SX250D
Q600
2SD2394-F
6V SWITCH
POWER SUPPLY
21 TO(5/10)
SW12V
JL611
JL603
6.4
F
19 TO(1/10)
PCONT_M12V
JL600
JL601
20 TO(4/10)
AUGND
ANGND
C611
47u
16V
5.1
2
4
JL617
12V REG
JL618
C615
22u
50V
R625
4700
12.0
GND
R626
1k
R11.4/P0
Q612
2SB1122-ST-TD
12V SWITCH
0.8
JL609
C604
47u
16V
R604
4700
5.2
D
1
C601
0.01u B
Q611
2PD601AR-115
SWITCH
(SEE PAGE
4-30)
R607
1500
R605
4700
11P
GND
4.8
3
25 TO(7/10)
AUGND
SW5V
Q603
2PD601AR-115
SWITCH
ET600
TO
POWER BLOCK
BOARD
R624
10k
R603
180
2W
R0.8/P0.7
0
12.1
R600
1k
1/4W
2
13.6
B
1
IC601
SW5V
Q613
PDTC144EK-115
POWER CONTROL
12.8
13V
JL614
JL608
R13.6/P13.5
C
C+12V
ANGND
Q601
2SB733-T-34
12V SWITCH
13.6
CN600
27 TO(8/10)
ANGND
JL619
A
13
4-26
23 TO(9/10)
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
JK-179 (LINE-2 IN) PRINTED WIRING BOARD (SE300 only)
KK-22 (DIAL TIMER) PRINTED WIRING BOARD
(SE300, SE450B/D/P only)
There are few cases that the part printed on this diagram isn’t
mounted in this model.
There are few cases that the part printed on this diagram isn’t
mounted in this model.
MA-372
VIDEO, AUDIO,
SERVO/SYSTEM CONTROL,
TUNER, POWER SUPPLY
JK-179 (SE300)
(LINE-2 IN)
POWER BLOCK
KK-22 (SE300, SE450B/D/P)
(DIAL TIMER (PUSH/TURN))
4-27
LINE-2 IN
JK-179
/ DIAL TIMER
KK-22
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
POWER SUPPLY BLOCK (SWITCHING REGURATOR) PRINTED WIRING BOARD
— Ref. No. :1,000 Series —
MA-372
VIDEO, AUDIO,
SERVO/SYSTEM CONTROL,
TUNER, POWER SUPPLY
JK-179 (SE300)
(LINE-2 IN)
POWER BLOCK
KK-22 (SE300, SE450B/D/P)
(DIAL TIMER (PUSH/TURN))
SWITCHING REGURATOR
POWER SUPPLY BLOCK
4-28
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
2
1
3
4
5
6
7
8
POWER BLOCK
A
AC IN
220-240V
50Hz
F001
2A
250V
3P
L001
60uH
1
NC
C001
0.047uF
250V
R001
0.5k
2M
D001
IN4007
L002
26mH
C002
0.1uF
250V
D003
IN4007
C003
47uF
400V
Z001
750V
2
R101
130k
R102
130k
3
C006
470p
250V
G4
G3
D002
IN4007
C007
470pF
250V
C004
3300pF
250V
L201
EXCELDR35V
12
13
14
R104
130k
D004
IN4007
L302
EXELDR35V
Q101
SSS2N90-A
IC101
L103
EXCEL
R107
0.75
PWM
16
6
4
7
3
8
2
9
C304
R111
10k
L401
3.3uH
1
GND
2
GND
3
GND
4
AU GND
5
35V
6
13V
7
13V
8
13V
9
6V
10
6V
11
-11V
11P
TO
MA-372 BOARD
(10/10)
CN600
(SEE PAGE
4-25)
R503
47
10
R505
1.8k
PC101 (1/2)
LTV817BM-V
R502
1.4k
8
R218
2.2k
C501
1uF
50V
3
6
5
D102
ERA91-02V3
ZD101
5.1V
0.4W
D104
ISS133T-77
R504
6.8k
R501
1k
C401
820uF
16V
C402
470uF
10V
C403
10nF
83V
IC501
D601
ERA91-02V3
C105
220nF
63V
C107
22uF
50V
R301
820
D401
ERB83-006V3
IC501
KA431AZTA
R112
1k
C303
10nF
63V
C301
820uF
25V
C404
1
4
Q102
2SC3311A-QTA
C104
1.5nF
50V
5
L301
3.3uH
D101
ISS133T-77
R113
100
R110
22k
C106
100nF
83V
C302
100uF
50V
D301
FE3C
7
2
C
1
ZD102
27V
0.4W
R201
100k
T101
ETB29AZ116AC
R105
4.7V
IC101
UC3844A
CN101
C201
100uF
50V
R103
130k
C
250V
G5
Note :
11
D201
IN4007
D103
IN4007
C005
3300pF
250V
B
D
10
ZD103
P6KE350ARL
– REF. NO. :1000 SERIES –
CN001
9
C103
470pF
50V
PC101 (2/2)
LTV817BM-V
C601
330uF
25V
C102
10uF
50V
R601
100k
C
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
4-29
4-30
SWITCHING REGURATOR
POWER SUPPLY BLOCK
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
MA-372 BOARD (4/10)
*MARKED = MOUNT TABLE
REF.NO
C205
C221
C239
C240
C241
C242
C253
C353
L206
Q204
R206
R207
R216
R217
R222
R223
R228
R232
R233
R352
R353
SE450
D/P
K
33p 50V CH
0.1u 25V CH
✕
47p 50V CH
✕
0.1u 25V B
470p 50V CH
✕
47u
PDTC144EK
680
2.7k
330k
100
✕
47
0
33k
4.7k
✕
✕
✕
SE400
K
B
SE300
G
SE250
D1/D2
B
D/P
1u 25V B
47p 50V CH
✕
SX250
D
39p 50V CH
SE200
G/I
SE100
A1/A2
V1/V2
0.1u 25V CH
SX100
K
1u 25V B
0.1u 25V CH
✕
✕
47p 50V CH
✕
0.1u 25V B
✕
✕
0.1u 25V B
470p 50V CH
✕
✕
✕
0.22u 16V B
✕
✕
✕
✕
47u
PDTC144EK
820
820
680k
✕
✕
100
✕
47
✕
✕
47
0
✕
✕
15k
✕
4.7k
✕
✕
68k
5.6k
MA-372 BOARD (5/10)
REF.NO
C665
IC162
L661
R160
R161
R165
R166
R672
4-31
SE450
B
D/P
56p 50V CH
✕
M37760MFH-215GP
2uH
✕
5.6k
1.5k
3.3k
1.5k/✕
3.3k
3.3k
1k
✕
K
SE400
K
56p 50V CH
1.5k
✕
✕
1k
D1/D2
✕
✕
22uH
8.2k
3.3k
SE300
G
✕
12k
3.3k
3.3k
3.3k
3.3k
✕
SE250
B
D/P
56p 50V CH
M37760MFH-210GP
22uH
5.6k
✕
✕
5.6k/1.5k
SX250
D
SE200
G/I
SE100
SX100
A1/A2
K
56p 50V CH
V1/V2
✕
5.6k
1k
4-32E
✕
3.3k
1.5k/8.2k
✕
✕
✕
22uH
8.2k
✕
3.3k
✕
1k
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
SECTION 5
INTERFACE, IC PIN FUNCTION DESCRIPTION
5-1. SYSTEM CONTROL — VIDEO/RP BLOCK INTERFACE (MA-372 BOARD IC162)
Signal
RF SWP
QVD
C.V.IN
*1
*2
*3
Pin No.
MA-372
IC162 qk
MA-372
IC162 qd
MA-372
IC162 th
I/O
STOP/
FF/REW
TAPE
TAPE
LOADING UNLOADING
O
*1
*1
O
L
I
*3
PB
REC
REC/PAUSE
*1
*1
*1
*1
L
L
*2
L
L
*3
*3
*3
*3
*3
Synchronized with drum rotation. 25 Hz 50% duty pluse.
Normally “L”. “H” when video signal is not generated.
Composite sync signal (positive).
5-2. SYSTEM CONTROL — SERVO PERIPHERAL CIRCUIT INTERFACE
(MA-372 BOARD IC162)
Signal
CTL +IN
DRUM PG
DRUM FG
CAP FG
CAP RVS
CAP ERR
DRUM ERR
*1.
*2.
*3.
*4.
*5.
*6.
*7.
Pin No.
MA-372
IC162 og
MA-372
IC162 o;
MA-372
IC162 il
MA-372
IC162 ij
MA-372
IC162 wf
MA-372
IC162 uh
MA-372
IC162 uj
TAPE
TAPE
LOADING UNLOADING
I/O
STOP
FF
REW
I/O
*7
*7
*7
*7
I
*3
*3
*3
I
*4
*4
I
H/L
O
PB
REC
*7
*7
*1
*3
*3
*3
*3
*4
*4
*4
*4
*4
*2
*2
*5
*5
*2
*2
H/L
L
H
L
H
L
L
O
L
*6
*6
*6
*6
*6
*6
O
*6
*6
*6
*6
*6
*6
*6
25 Hz pulse.
Pulse in period in proportion to tape speed.
25 Hz “H” pulse.
330 Hz pulse.
Unstable period pulse.
DC voltage 1 to 5V.
Hi-Z (2.5 V)
5-1
5-3. SYSTEM CONTROL — MECHANISM BLOCK INTERFACE (MA-372 BOARD IC162)
Signal
CAM
MODE 1
MODE 2
MODE 3
MODE 4
REC PRF
T REEL
S REEL
END LED
T SENS
S SENS
*1.
*2.
*3.
*4.
*5.
Pin No.
MA-372
IC162 ed
MA-372
IC162 wl
MA-372
IC162 wk
MA-372
IC162 wj
MA-372
IC162 wh
MA-372
IC162 e;
MA-372
IC162 i;
MA-372
IC162 ul
MA-372
IC162 w;
MA-372
IC162 7
MA-372
IC162 6
CASSETTE CASSETTE
TAPE
TAPE
STOP
LOADING UNLOADING THREADING UNTHREADING
I/O
EJECTED
FF
REW
PB
REC
O
M
H/M
L/M
H/M
L/M
M
M
M
M
M
I
H
—
—
L
L
H
H
H
H
H
I
H
—
—
L
L
H
H
H
L
L
I
L
—
—
H
H
H
L
L
L
L
I
L
—
—
H
H
L
H
H
L
L
I
L
*1
*1
*1
*1
*1
*1
*1
*1
*1
I
H/L
H/L
H/L
H/L
H/L
H/L
*2
*2
*2
*2
I
H/L
H/L
H/L
*2
*2
H/L
*2
*2
*2
*2
O
L
*3
*3
*3
*3
*3
*3
*3
*3
*3
I
*3
*3
*3
*4
*4
*4
*4
*4
*4
*4
I
*3
*3
*3
*4
*4
*4
*4
*4
*4
*4
“L” when erasing protection tab is bent. “H” when not bent.
Pulse of period in proportion to reel rotating speed.
Approx. 2 msec period “H” pulse.
Normally “L”. 2 msec period “H” pulse when tape top or tape end is detected.
Hi-Z
5-4. SYSTEM CONTROL — SYSTEM CONTROL PERIPHERAL CIRCUIT INTERFACE
(MA-372 BOARD IC162)
Signal
RESET
Pin No.
MA-372
IC162 ef
I/O
I/O level
I
Normal “H” , “L” when seryvice Interruption is detected or restored.
5-5. SYSTEM CONTROL — AUDIO BLOCK INTERFACE (MA-372 BOARD IC162)
Signal
Pin No.
I/O
STOP/
FF/REW
A MUTE
MA-372
IC162 yd
O
L
TAPE
TAPE
LOADING UNLOADING
L
L
5-2
PB
REC
REC/PAUSE
L
L
H
5-6. SERVO/SYSTEM CONTROL MICROPROCESSOR PIN FUNCTIONS
(MA-372 BOARD IC162)
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Pin Name
DEST1
DEST2
TU AFT
FU KEY2
FU KEY1
S SENS
T SENS
RF ENV
N.C.
MOD CONT
KKP+
KKP–
QVD
REMOCON
CROT
HA SW
ENV S
RF SWP
I/O
I
I
I
I
I
I
I
I
—
O
I
I
O
I
O
O
I
O
Function
Destination identification input 1
Destination identification input 2
AFT input from TUNER for station selection
Function key input (9 keys)
Function key input (9 keys)
Tape end sensor input
Tape top sensor input
Video RF envelope input
N.C.
RF modulator ON/OFF control
KKP 2-phase pulse B input
KKP 2-phase pulse A input
Pseudo VD output
Remote control SIRCS signal input
Head azimuth information
SP/EP head switching signal
Identification signal of SP/EP head output comparison & detection
Video RF switching pulse output
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
AF SWP
END LED
AV CONT
AF REC P
FULL ERS
CAP RVS
I CONT
MODE 4
MODE 3
MODE 2
MODE 1
REC PRF
IIC CLK1 (EEP)
IIC DATA1 (EEP)
CAM
RESET
32kHz (IN)
32kHz (OUT)
Vcc
17.734475MHz (IN)
17.734475MHz (OUT)
Vss
NICAM. CLK
NICAM. DATA
CLK SEL
OSC CHARA (IN)
OSC CHARA (OUT)
NUB
OSD LPF
LP
OSD GND
OSD V IN
O
O
O
O
O
O
O
I
I
I
I
I
O
I/O
O
I
I
O
N.C.
End sensor LED output
EURO 21 pin AV CONT signal output
N.C.
N.C.
Inverted capstan signal
EURO 21 pin-I CONT signal output
Cam encode data 4
Cam encode data 3
Cam encode data 2
Cam encode data 1
Safety tab detection input
I2C clock (EEPROM control)
I2C data (EEPROM control)
Cam motor control signal
Reset input
Sub clock input
Sub clock output
Power supply input terminal (high speed mode: 4.0 to 5.5 V, low speed mode: 2.6 to 5.5 V)
Main clock input
Main clock output
Ground terminal
N.C.
N.C.
Selection of oscillation clock when reset is canceled. L: sub clock, H: main & sub clocks
Clock input for OSD character size
Clock output for OSD character size
Connected to Ground
External filter that doubles the fsc, is connected to this terminal
“L” at SP. “H” at EP/LP.
Ground terminal of OSD/slicer
Video signal input for OSD overlay
I
O
O
O
I
I/O
I/O
I/O
O
I
5-3
Pin No.
Pin Name
51
OSD W LEVEL
52
OSD V OUT
53
OSD Vcc
I/O
I
O
54
HLF (SLICER LPF)
I/O
55
OSD SECAM C IN
I
56
C V IN (C SYNC IN)
I
57
58
59
60
61
62
63
64
65
66
67
68
69
70
NUA
DEC/VTR
PDC DAV
AV CONT IN/C+DET
DIV CLK OUT/JOG LED CONT
TA MUTE
A MUTE
MTR 12V CONT.
SW 5V CONT.
FLD CS
SECAM ON
TO FLD DATA
18V CONT
FLD CLOCK
SCL
(VI/HF/TU/NICAM ZWEI/MOD/VPS/DNR)
SDA
(VI/HF/TU/NICAM ZWEI/MOD/VPS/DNR)
TO AV LINK
–14V CONT
C+ 5V CONT
CAP ERROR
DRUM ERROR
P FAIL
S REEL
T REEL
DMS+
DMS–
TU SW1
TU SW2
FROM AV LINK
SECAM DET
CAP FG
AMP Vss
DRUM FG
DRUM PG
AMP VREF OUT
AMP VREF IN
RC CHECK
CTL –IN
CTL +IN
AMP C
CTL AMP OUT
AMP Vcc
AVcc
24V CONT
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
O
I
I
O
O
O
O
O
O
O
O
O
O
Function
OSD white level input
OSD video signal output
Power supply input terminal for OSD/slicer (4.75 V to 5.25 V)
LPF connection terminal for slicer/AFC (This terminal is used as the HLF terminal
when C. Video is input to pin-56.)
Color signal input for SECAM OSD
Video signal input for tuner’s station selection, OSD and servo sync signal detection
(after passing filter)
Connected to Ground
Decoder/VTR switching
PDC/VPS signal reception identification input
CANAL+ connection identification input
Terminal of using JOGLED output or adjustment mode output of clock dividing frequency
Tuner audio mute signal output
Audio mute signal output
Motor 12 V power control signal
SW 5 V power control signal
Chip selection signal for display tube driver
SECAM ON signal/surround audio control (switched by destination)
Serial data out CH0 (FLD)
N.C.
Serial clock CH0 (FLD)
I/O
I2C clock (video/HiFi/tuner/ARC/modulator/VPS control)
I/O
I2C data (video/HiFi/tuner/ARC/modulator/VPS control)
O
O
O
O
O
I
I
I
I
I
O
O
I
I
I
I
I
I
I/O
I/O
O
O
SMART LINK data output for communication
Power save control
Power save control
Capstan error output
Drum error output
Power failure detection input
Supply reel sensor input
Take up reel sensor input
N.C.
N.C.
Turner system BG/L selection signal
Turner system BGL/L selection signal
SMART LINK data input for communication
SECAM identification input
Capstan FG input
Ground terminal for analog amplifier (connected to Vss)
Drum FG input
Drum PG input
Analog amplifier reference power supply output terminal
Analog amplifier reference power supply output terminal
No use (Fix to “L” on the outside for the terminal only for the input)
CTL signal input/output terminal
CTL signal input/output terminal
CTL amplifier AC Ground terminal
CTL amplifier output
Power supply input terminal for analog amplifier (connected to Vcc)
Power supply input and reference voltage input to A-D converter
N.C.
5-4
5-7. MODE CONTROL PIN FUNCTIONS (MA-372 BOARD IC420)
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
Pin Name
VDD
X OUT
VSS
X IN
RESET
AN5
AN4
AN3
AN2
AN1
AN0
CS
D IN
D OUT
CLK
VEE
VEE
LED1 (RR)
LED2 (IRDREC)
NC
G1
G2
G3
G4
G5
G6
S17
S16
S15
S14
S13
S12
S11
S10
S9
S8
S7
S6
S5
S4
S3
S2
S1
VDD
I/O
O
I
I
O
I
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Function
D5V
X’ tal out
Ground.
X’ tal in
RESET input.
Ground.
Ground.
Ground.
Ground.
Ground.
Ground.
FLD chip select signal out.
FLD IIC BUS (data) input.
Not connect.
FLD clock.
–11V
–11V
RR LED control signal output.
IRDREC LED control signal output.
Not Connect.
Grid terminal 1.
Grid terminal 2.
Grid treminal 3.
Grid treminal 4.
Grid treminal 5.
Grid treminal 6.
Segment terminal 17.
Segment terminal 16.
Segment terminal 15.
Segment terminal 14.
Segment terminal 13.
Segment terminal 12.
Segment terminal 11.
Segment terminal 10.
Segment terminal 9.
Segment terminal 8.
Segment terminal 7.
Segment terminal 6.
Segment terminal 5.
Segment terminal 4.
Segment terminal 3.
Segment terminal 2.
Segment terminal 1.
D5V
5-5
MEMO
5-6E
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
SECTION 6
ADJUSTMENTS
2-1-3. Set-up of Adjustment
In this adjustment, PAL pattern generator is connected with LINE2 input terminal. When check to tuner, connected AERIAL terminal.
Check that the synchronizing signal of the Y signal has an amplitude
of approximately 0.7 V and that the burst signal has an amplitude of
approximately 0.3 V and its waveform is flat. And check that the
level ratio of burst signal to “red” signal is 0.30 : 0.66. The video
signal (color bar) used for electrical aligning this unit is shown in
Fig. 6-2-2.
6-1. MECHANICAL ADJUSTMENTS
For the mechanical adjustments, please refer to the
“VHS MECHANICAL ADJUSTMENT MANUAL
(S MECHANISM)” (9-921-647-11).
6-2. ELECTRICAL ADJUSTMENTS
See the adjusting part location diagram from on page 6-4
for the adjustment.
2-1.
White (75%)
PREPARATION BEFORE ADJUSTMENT
2-1-1. Equipment Required
The measuring instruments used for this alignment include:
1) Monitor TV
2) Oscilloscope, dual-trace, bandwidth of 30 MHz or more, with
delay mode (A probe 10:1 should be used unless otherwise
specified.)
3) Frequency counter
4) PAL Pattern generator
5) Remote commander
6) Digital voltmeter
7) Audio generator
8) Audio level meter
9) Audio attenuator
10) Alignment tapes
KRV-51P (PAL)
Part No. : 8-192-955-57
Approx. 0.7 V
Approx. 0.3 V
Video output
(75Ω)
Burst signal
(Should be flat)
Fig. 6-2-2 Color Bar Signals of Pattern Generator
2-1-4. Alignment Tape
• Contents of KRV-51P
Mode
1
2
3
4
J481
VIDEO IN
VCR
Red
Horizontal sync signal
2-1-2. Equipment Connection
Unless otherwise specified, connect and adjust the measuring
instruments as shown in the following diagram.
Pattern generator
Approx.
0.3 V
Monitor TV
CN500 ql V OUT
Fig. 6-2-1
6-1
SP
LP
Period
Video signal
Audio signal
Normal
Hi-Fi
7 minutes
3 minutes
7 minutes
3 minutes
Color bar
Monoscope
Color bar
Monoscope
400Hz
(L/R)
400Hz
2-1-5. Input/Output Levels and Impedance
Video input: LINE-1 (TV)/LINE-2 IN
Input signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
Video output: LINE-1 (TV)
Output signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
Audio input: LINE-1 (TV)/LINE-2 IN
Input level: –7.5 dBs
(0 dBs= 0.775 Vrms)
Input impedance: more than 47 kilohms
Audio output:LINE-1 (TV)
Standard level: –7.5 dBs at load impedance 47
kilohms
Output impedance: less than 10 kilohms
2-2.
POWER SUPPLY CHECK
2-2-1. Output Voltage Check (MA-372 Board)
Mode
STANDBY
2-1-6. Adjustment Sequence
The adjustments should be performed in the following sequence.
Power Supply Check
Servo System Adjustments
Audio System Adjustments
D5 V Check
Measurement point
Cathode of D606
Specified value
4.8 to 5.4 V
Mode
E-E
–11 V Check
Measurement point
Corrector of Q602
Specified value
SW +12 V Check
–13.5 to – 9.5 V
Measurement point
Specified value
IC601 pin 2 or corrector of Q612
11.7 to 12.3 V
SW +5 V Check
Measurement point
Emitter of Q600
Specified value
MTR12 V Check
4.8 to 5.4 V
Measurement point
Specified value
Corrector of Q601
12.6 to 13.6 V
SW +30 V Check
Measurement point
Corrector of Q720
Specified value
33.5 to 36.5 V
[Check Method]
1) Each of these supply voltages must meet its specified value.
6-2
2-3.
2-4-1. Normal Audio System Adjustment
• Make adjustment in the SP mode unless otherwise specified. Use
a normal VHS cassette for an adjustment tape.
• Set AUDIO MONITOR to normal.
SERVO SYSTEM CHECK
2-3-1.
RF Switching Position Adjustment
(MA-372 Board)
[Adjustment Purpose]
To adjust the link of the A-ch and B-ch of the tape playback outputs.
To make the unit compatible with other tapes and units. If this
specification is not satisfied, the link will appear on the screen and
the screen will be disrupted, etc.
2-4-2. ACE Head Adjustment
Refer to the VHS mechanical adjustment manual
MECHANISM) (9-921-647-11).
2-5.
ADJUSTING PARTS LOCATION DIAGRAM
MA-372 BOARD
(CONDUCTOR SIDE)
LINE-1(TV)
(S
CN500
CN262
1
5
2-4-3. E-E Output Level Check
[Adjustment purpose]
Confirm that the output level adjust the reference input is within the
specification.
Mode
E-E
Mode
Playback
Signal
Measurement point
Alignment tape: SP color bar portion
CH1: CN262 pin 1 (PB RF)
CH2: CN262 pin 2 (RF SWP)
Measuring instrument
Adjusting element
Oscilloscope
Remote commander CH+/–
Signal
Measurement point
400 Hz, –6.3 dBs
CN500 Pin 3
Specified value
A=minimize
Measuring instrument
Specified value
Audio level meter
–6.3 ± 2 dBs
[Adjustment Method]
1) Playback the alignment tape.
2) Short CN262 pin 5 to Ground.
3) Check that “A P” is indicated on FL display.
4) Adjust so that part A becomes minimized at CH +/–.
5) Write data in EEPROM by pressing PAUSE button.
6) The display “A P” disappears and then the Adjustment mode
terminates.
E
Q601
B
[Check Method]
1) Input signal of 400 Hz and –6.3 dBs to the J480.
2) Check that the audio output level is –6.3 ± 2 dBs.
2-4-4. Frequency Response Check
[Adjustment purpose]
Confirm that the frequency characteristic is within the specification.
Mode
REC and PB (SP mode)
A
Signal
CH1
PB RF
CH2
RF SWP
Measurement point
Measuring instrument
400 Hz, –26.3 dBs
7 kHz, –26.3 dBs
CN500 Pin 3
Audio level meter
Specified value
0 ± 3 dB
B
Q600
E
B
E
Q602
Note: Tape path adjustment must have been completed.
Fig. 6-2-3
2-4.
[Confirmation Method]
1) Supply a signal of 400 Hz, –26.3 dBs to J481 AUDIO IN.
2) Connect the audio level meter to CN500 Pin 3.
3) Adjust the attenuator so that the audio level meter will indicate
–26.3 dBs.
4) Make recording in the SP mode.
5) Set an audio line input signal to 7 kHz and make recording.
6) Playback a recorded portion, and measure output levels at 400
Hz and 7 kHz.
7) Confirm that the 7 kHz playback output level within a range of
the 400 Hz playback output level 0 dB to ± 3 dB.
AUDIO SYSTEM ADJUSTMENT
[Connecting Instruments]
CN500
3 A (L) OUT
4 A GND
J481 AUDIO IN
Audio oscillator
600 Ω
Audio level meter
or distortion meter
JK-179 BOARD
(CONDUCTOR SIDE)
J481
47 kΩ
Attenuator
VTR
LINE-2 IN
Fig. 6-2-4
6-3
6-4
MEMO
6-6E
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
SECTION 7
REPAIR PARTS LIST
7-1. EXPLODED VIEWS
NOTE:
• -XX, -X mean standardized parts, so they may
have some differences from the original one.
• Items marked “*” are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering these
items.
•
The mechanical parts with no reference number
in the exploded views are not supplied.
The components identified by mark 0 or
dotted line with mark 0 are critical for safety.
Replace only with part number specified.
8
7-1-1. FRONT PANEL AND UPPER CASE SECTION
9
17
8
18
10
14
15
19
6
7
2
16
10
12 11
13
4
1
Ref. No.
3
5
Part No.
Description
1
1
1
1
1
X-3950-180-1
X-3950-181-1
X-3950-182-1
X-3950-183-1
X-3950-184-1
PANEL ASSY, FRONT (SE450D)
PANEL ASSY, FRONT (SE450B)
PANEL ASSY, FRONT (SE450P)
PANEL ASSY, FRONT (SE300G)
PANEL ASSY, FRONT (SE300D1/D2)
8
1
1
1
1
1
X-3950-185-1
X-3950-186-1
X-3950-187-1
X-3950-188-1
X-3950-189-1
PANEL ASSY, FRONT (SE250D)
PANEL ASSY, FRONT (SE250B)
PANEL ASSY, FRONT (SE250P)
PANEL ASSY, FRONT (SX250D)
PANEL ASSY, FRONT (SE200G/I)
9
10
1
1
1
1
1
X-3950-190-1
X-3950-191-1
X-3950-192-1
X-3950-193-1
X-3950-194-1
PANEL ASSY, FRONT (SE200V1/V2)
PANEL ASSY, FRONT (SE100A1/A2)
PANEL ASSY, FRONT (SE450K)
PANEL ASSY, FRONT (SE400K)
PANEL ASSY, FRONT (SE100K)
1
2
X-3950-195-1 PANEL ASSY, FRONT (SX100K)
3-053-436-01 EMBLEM (NO.5), SONY
(EXCEPT:SE200G/I,SE300G,SX100K,SX250D)
3-057-833-01 BUTTON, CENTER
(EXCEPT:SE200G/I,SE250B,SE300G,SE450B,SX100K,SX250D)
3-057-833-11 BUTTON, CENTER (SE250B,SE450B)
3-057-833-21 BUTTON, CENTER
(SE200G/I,SE300G,SX100K,SX250D)
3
3
3
Remarks
Ref. No.
8
9
11
12
4
5
6
7
7
3-057-845-01 PLATE, FROSTED
(EXCEPT:SE100A1/A2/K,SE400K,SX100K)
3-057-845-11 PLATE, FROSTED
(SE100A1/A2/K,SE400K,SX100K)
3-058-056-01 SEAL,INSULATOR
3-953-432-01 SPRING (GE), FL
3-057-841-21 DOOR,CASSETTE
(EXCEPT:SE200G/I,SE300G,SX100K,SX250D)
3-057-841-31 DOOR,CASSETTE
(SE200G/I,SE300G,SX100K,SX250D)
Remarks
12
13
13
14
15
15
16
17
A-6794-737-A
3-057-846-01
3-057-846-11
3-057-847-01
1-418-008-11
17
1-418-008-21 COMMANDER, STANDARD(RMT-V257A)
(SE250B)
1-418-008-31 COMMANDER, STANDARD(RMT-V257B)
(SE200G/I/D/P,SE450D/P/K,SX250D)
1-418-008-41 COMMANDER, STANDARD(RMT-V257C)
(SE450B)
1-418-781-11 COMMANDER, STANDARD (RMT-V287)
(SE300D1/D2/G)
3-709-433-01 COVER, REMOTE CONTROL BATTERY
(FOR RMT-V257,V257A,V257B,V257C,V287)
17
17
18
0 19
7-1
Description
3-363-099-01 SCREW(CASE 3 TP2)
(EXCEPT:SE200G/I,SE300G,SX100K,SX250D)
3-363-099-11 SCREW(CASE 3 TP2)
(SE200G/I,SE300G,SX100K,SX250D)
3-058-423-21 CASE,UPPER (E)
(EXCEPT:SE200G/I,SE300G,SX100K)
3-058-423-31 CASE,UPPER (E)(SE200G/I,SE300G,SX100K)
4-921-277-41 SCREW (B2.6X8), TAPPING, BIND
(SE300D1/D2/G,SE450B/D/P)
A-6794-738-A KK-22A MOUNT (SE300D1/D2/G,SE450B/D/P)
3-057-848-01 ESCUTCHEON, DIAL TIMER
(SE300D1/D2,SE450B/D/P)
3-057-848-11 ESCUTCHEON, DIAL TIMER (SE300G)
3-057-852-01 KNOB, DIAL TIMER (SE300D1/D2,SE450B/D/P)
3-057-852-11 KNOB, DIAL TIMER (SE300G)
17
4
Part No.
JK-179A MOUNT (SE300D1/D2/G)
HOLDER, PIN JACK (SE300D1/D2)
HOLDER, PIN JACK (SE300G)
LENSSS (SE300D1/D2/G)
COMMANDER, STANDARD (RMT-V257)
(SE100A1/A2/K,SE200V1/V2,SX100K)
1-777-854-21 CORD, POWER
7-1-2. CHASSIS SECTION
52
#1
52
#1
53
54
52
51
#1
52
55
not supplied
not supplied
not supplied
52
52
56
Ref. No.
51
51
51
51
51
51
51
51
Part No.
Description
Remarks
Ref. No.
A-6713-557-A MA-372A COMPLETE PC BOARD
(SE100K,SX100K)
A-6713-558-A MA-372B COMPLETE PC BOARD (SE450K)
A-6713-559-A MA-372C COMPLETE PC BOARD (SE400K)
A-6713-560-A MA-372D COMPLETE PC BOARD (SE100A1/A2)
A-6713-561-A MA-372E COMPLETE PC BOARD (SE200G)
51
51
A-6713-562-A MA-372F COMPLETE PC BOARD (SE200I)
A-6713-563-A MA-372G COMPLETE PC BOARD (SE200V1/V2)
A-6713-564-A MA-372H COMPLETE PC BOARD
(SE250D,SX250D)
A-6713-565-A MA-372I COMPLETE PC BOARD (SE250P)
A-6713-566-A MA-372J COMPLETE PC BOARD (SE250B)
51
51
A-6713-567-A MA-372K COMPLETE PC BOARD (SE300D1/D2)
A-6713-568-A MA-372L COMPLETE PC BOARD (SE300G)
Part No.
Description
51
51
51
52
53
A-6713-569-A
A-6713-570-A
A-6713-571-A
3-970-608-21
1-792-019-11
MA-372M COMPLETE PC BOARD (SE450D)
MA-372N COMPLETE PC BOARD (SE450P)
MA-372O COMPLETE PC BOARD (SE450B)
SUMITITE (B3), +BV
CABLE, FLAT (FFM-36)
54
55
55
1-792-018-11 CABLE, FLAT (FAC-8)
3-057-836-01 PANEL, REAR (E) (SE300D1/D2)
3-057-836-11 PANEL, REAR (E)
(SE250B/D/P,SE450B/D/P,SX250D)
3-057-836-21 PANEL, REAR (E) (SE100A1/A2)
3-057-836-31 PANEL, REAR (E) (SE300G)
55
55
55
0 56
3-057-836-41 PANEL, REAR (E)
(SE100K,SE200G/I/V1/V2,SE400K,SE450K,SX100K)
1-468-459-11 POWER BLOCK
Note :
7-2
Remarks
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
7-1-3. MECHANISM DECK SECTION-1
707
#701
710
708
709
706
726
not
supplied
723
704
712
711
703
705
722
701
702
713
725
724
721
720
701
716
714
719
715
717
718
Ref. No.
Part No.
Description
701
702
703
704
705
3-977-509-01
3-977-507-01
3-977-508-01
1-500-144-11
3-977-495-01
WASHER, THRUST
TABLE, REEL (S)
TABLE, REEL (T)
HEAD, FE
SHAFT TG2
706
707
708
709
710
3-977-494-01
A-6759-619-B
3-977-535-01
3-977-536-01
3-970-471-01
HOLDER, FEH
FL COMPLETE ASSY
PLATE, LUMINOUS (END SENSOR)
PLATE, LUMINOUS (TOP SENSOR)
SPRING (DECK OPEN), TORSION
711
712
713
A-6759-863-B PRESS BLOCK ASSY, PINCH
3-958-455-01 SPRING (PINCH), TENSION
3-977-447-01 GEAR, ELEVATOR
Remarks
Ref. No.
7-3
Part No.
Description
714
715
716
717
718
3-977-514-01
3-977-441-03
3-977-445-02
3-977-465-01
X-3947-582-1
OPENER, LID
GEAR, PINCH PRESSING
GEAR, TG8 ARM DRIVING
SPRING,EXTENSION(RVS BRAKE)
ARM ASSY, RVS BRAKE
719
720
721
722
723
3-977-446-01
X-3947-590-1
A-6775-791-A
3-974-556-11
3-979-508-01
GEAR, TG8 ARM
TG8 ASSY
ACE BLOCK ASSY (ALPS) (EURO 3)
+HEXA TT 2.6X9 (TAPER)
SCREW +HEXA TP SW 3X8
724
725
726
3-719-381-01 SCREW (M2X4)
3-736-045-01 BEARING (NO FLANG), BALL
3-058-999-01 PLATE, DRUM COVER
Remarks
7-1-4. MECHANISM DECK SECTION-2
771
M901
772
773
761
#701
764
760
763
762
758
762
763
757
#702
766
756
765
755
754
752
753
751
Ref. No.
Part No.
Description
Part No.
Description
751
752
753
754
755
X-3947-581-4
3-977-462-01
X-3947-573-1
X-3947-580-5
3-977-513-02
BRAKE ASSY,MAIN(T)
SPRING,EXTENTION. (MAIN BRAKE)
ARM ASSY, PENDULUM
BRAKE ASSY, MAIN(S)
LEVER, REC. PROOF
Remarks
Ref. No.
764
765
766
771
772
3-969-632-04
A-6750-328-E
3-977-501-01
A-6746-074-G
X-3947-255-1
BASE, DRUM
SHUTTLE (T) BLOCK ASSY (VW32)
PLATE, LUMINOUS
ROLLER BLOCK ASSY, HC
ROLLER ASSY, HC
756
757
758
760
3-976-767-01
3-977-487-01
X-3950-427-1
3-977-488-01
SPRING, TENS. (REC. PROOF)
BOSS, TG1 FULCRUM
TG1 ASSY (SD)
SPRING (POWER TENSION)
773
M901
761
762
763
A-6750-324-A SHUTTLE (S) BLOCK ASSY (VW32)
X-3944-378-1 ROLLER ASSY, GUIDE
3-965-178-01 SPRING
3-975-724-07 ARM, HC
1-774-359-11 DRUM ASSY DZH-78E-R
(SE100V1/V2/K,SE200V1/V2,SE250B,SX100K)
1-774-361-11 DRUM ASSY DZH-92D-R
(SE200G/I,SE250D/P,SE300D1/D2/G,SX250D)
1-774-362-11 DRUM ASSY DZH-93D-R
(SE400K,SE450B/D/K/P)
M901
M901
7-4
Remarks
7-1-5. MECHANISM DECK SECTION-3
816
815
817
836
M902
803
818
803
814
#701
812
813
828
811
829
820
810
808
809
819
827
821
826
807
805
822
804
806
823
824
833
831 832
830
M903
803
801
825
802
835
Ref. No.
Part No.
Description
801
802
803
804
805
3-977-437-01
X-3947-584-1
3-977-443-01
3-977-438-01
3-977-506-01
RETAINER,CAM MOTOR
ASSY, REEL DIRECT
WASHER, STOPPER
WORM - WHEEL
ARM, LIMITTER SELECTION
806
807
808
809
810
3-977-444-01
3-977-515-01
3-977-517-01
3-977-519-01
3-977-518-02
811
812
813
814
815
816
817
818
819
Remarks
#703
Ref. No.
Part No.
Description
820
821
822
823
824
3-977-456-03
X-3947-579-1
3-977-451-01
3-977-452-01
X-3947-578-1
SPRING, TORSION (LOAD T)
LEVER ASSY, LOADING(T)
GEAR, LOADING(S)
SPRING, TORSION (LOAD S)
LEVER ASSY, LOADING(S)
GEAR, PINCH TRANSMISSION
GUIDE, FL SLIDER
PLATE, SLIDE, FL
SPRING, TENS. (LIMIT, FL)
PLATE, LIMITTER, FL
825
826
827
828
829
X-3947-576-2
3-977-468-01
3-977-467-02
X-3947-583-1
3-977-489-01
CHASSIS ASSY, MECHANICAL
SHAFT, CAPSTAN BRAKE
SPRING, CAP BRAKE
BRAKE ASSY, CAPSTAN
ARM, TG1 DRIVING
3-977-516-01
3-977-877-01
3-977-504-01
X-3947-585-1
3-977-510-01
HOLDER, FL SLIDER
PLATE, RETAINER
GEAR, CLUTCH
GEAR ASSY, PULLEY
BELT, RUBBER
830
831
832
833
835
A-6759-616-A
1-541-309-11
1-766-723-21
3-977-436-01
3-989-917-01
GEAR BLOCK ASSY, LOADING(S)
MOTOR, L (RF-370C) (LOADING)
CONNECTOR, BOARD TO BOARD 3P
WORM
SPACER (REC PROOF)
3-056-952-11
3-977-439-01
3-977-442-03
3-977-455-01
WASHER, STOPPER
GEAR, CAM
SLIDER
GEAR, LOADING(T)
836
M902
M903
3-056-824-01 WASHER, STOPPER
1-698-971-11 MOTOR, DC (CAPSTAN)
X-3947-577-1 MOTOR ASSY, CAM (LOADING)
7-5
Remarks
JK-179
KK-22
MA-372
7-2. ELECTRICAL PARTS LIST
NOTE:
• Due to standardization, replacements in the
parts list may be different from the parts
specified in the diagrams or the components
used on the set.
• -XX, -X mean standardized parts, so they may
have some difference from the original one.
• Items marked “*” are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering these
items.
• CAPACITORS:
uF: µF
Ref. No.
Part No.
•
•
•
RESISTORS
All resistors are in ohms.
METAL: metal-film resistor
METAL OXIDE: Metal Oxide-film resistor
F: nonflammable
COILS
uH: µH
SEMICONDUCTORS
In each case, u: µ, for example:
uA...: µA... , uPA... , µPA... ,
uPB... , µPB... , uPC... , µPC... ,
uPD..., µPD...
Description
Remarks
Ref. No.
A-6794-737-A JK-179A BOARD, COMPLETE (SE300)
***********************
1-163-009-11 CERAMIC CHIP
1-163-009-11 CERAMIC CHIP
0.001uF
0.001uF
10%
10%
50V
50V
5%
5%
1/10W
1/10W
< DIODE >
D481
D491
D493
8-719-067-40 DIODE STZ6.8N-T146
8-719-067-40 DIODE STZ6.8N-T146
8-719-070-59 DIODE PDZ6.8B-115
< JACK >
J481
1-695-451-11 JACK, PIN 2P (LINE-2 IN)
< RESISTOR >
R480
R491
1-216-022-00 METAL CHIP
1-216-041-00 METAL CHIP
75
470
The components identified by mark 0 or
dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Description
Remarks
A-6713-563-A MA-372G COMPLETE BOARD, COMPLETE
(SE200V1/V2)
********************************
A-6713-564-A MA-372H COMPLETE BOARD, COMPLETE
(SE250D,SX250D)
********************************
A-6713-565-A MA-372I COMPLETE BOARD, COMPLETE
(SE250P)
********************************
A-6713-566-A MA-372J COMPLETE BOARD, COMPLETE
(SE250B)
********************************
A-6713-567-A MA-372K COMPLETE BOARD, COMPLETE
(SE30OD1/D2)
********************************
A-6713-568-A MA-372L COMPLETE BOARD, COMPLETE
(SE300G)
********************************
A-6713-569-A MA-372M COMPLETE BOARD, COMPLETE
(SE450D)
********************************
A-6713-570-A MA-372N COMPLETE BOARD, COMPLETE
(SE450P)
********************************
A-6713-571-A MA-372O COMPLETE BOARD, COMPLETE
(SE450B)
********************************
< CAPACITOR >
C481
C493
Part No.
When indicating parts by reference number,
please include the board name.
< SWITCH >
S481
1-771-410-21 SWITCH, TACT (EJECT)
S482
1-771-410-21 SWITCH, TACT (POWER)
************************************************************
A-6794-738-A KK-22A BOARD, COMPLETE
(SE300,SE450B/D/P)
**********************
3-057-854-01
3-058-480-01
3-960-273-01
3-960-274-01
*
*
S410
1-418-156-11 ENCODER, ROTARYRY (DIAL TIMER)
************************************************************
BASE, FL
HOLDER, FLO
SPACER, TOP END
SPACER, LED
< CAPACITOR >
C100
A-6713-557-A MA-372A COMPLETE BOARD, COMPLETE
(SE100K,SX100K)
********************************
A-6713-558-A MA-372B COMPLETE BOARD, COMPLETE
(SE450K)
********************************
A-6713-559-A MA-372C COMPLETE BOARD, COMPLETE
(SE400K)
********************************
A-6713-560-A MA-372D COMPLETE BOARD, COMPLETE
(SE100A1/A2)
********************************
A-6713-561-A MA-372E COMPLETE BOARD, COMPLETE
(SE200G)
********************************
A-6713-562-A MA-372F COMPLETE BOARD, COMPLETE
(SE200I)
********************************
7-6
C101
C102
C103
C105
1-163-009-11 CERAMIC CHIP 0.001uF 10%
50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
1-163-009-11 CERAMIC CHIP 0.001uF 10%
50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
1-163-009-11 CERAMIC CHIP 0.001uF 10%
50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
1-128-057-11 ELECT
330uF
20.00% 6.3V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
1-163-009-11 CERAMIC CHIP 0.001uF 10%
50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
MA-372
Ref. No.
Part No.
Description
Remarks
Ref. No.
Part No.
Description
47uF
20%
16V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
CERAMIC CHIP 1uF
10%
16V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
CERAMIC CHIP 0.01uF
10.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
CERAMIC CHIP 0.01uF
10.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
CERAMIC CHIP 0.1uF
25V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C163
C164
C165
C166
C167
1-163-021-91
1-126-933-11
1-163-021-91
1-163-021-91
1-163-809-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
100uF
0.01uF
0.01uF
0.047uF
10.00%
20.00%
10.00%
10.00%
10%
50V
16V
50V
50V
25V
C168
C169
C170
C171
C172
1-163-235-11
1-163-235-11
1-164-004-11
1-163-231-11
1-163-231-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
22PF
22PF
0.1uF
15PF
15PF
5.00%
5.00%
10%
5.00%
5.00%
50V
50V
25V
50V
50V
C173
C200
C201
C202
C203
1-163-007-11
1-163-021-91
1-126-960-11
1-163-021-91
1-163-809-11
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
680PF
0.01uF
1uF
0.01uF
0.047uF
10%
10.00%
20.00%
10.00%
10%
50V
50V
50V
50V
25V
C204
C205
C206
C207
1-163-021-91 CERAMIC CHIP 0.01uF
10.00% 50V
1-163-241-11 CERAMIC CHIP 39PF
5%
50V
(SE100,SE200,SE250,SE300,SX100K,SX250D)
1-163-239-11 CERAMIC CHIP 33PF
5.00% 50V
(SE400K,SE450)
1-163-809-11 CERAMIC CHIP 0.047uF 10%
25V
1-163-237-11 CERAMIC CHIP 27PF
5.00% 50V
C208
C209
C210
C211
C212
1-126-960-11
1-163-257-11
1-163-237-11
1-109-982-11
1-163-809-11
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
180PF
27PF
1uF
0.047uF
20.00%
5.00%
5.00%
10.00%
10%
50V
50V
50V
10V
25V
C213
C214
C215
C216
C217
1-109-982-11
1-164-004-11
1-163-021-91
1-163-037-11
1-163-021-91
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.1uF
0.01uF
0.022uF
0.01uF
10.00%
10%
10.00%
10%
10.00%
10V
25V
50V
25V
50V
C218
C219
C220
C221
1-163-021-91 CERAMIC CHIP 0.01uF
10.00% 50V
1-163-038-91 CERAMIC CHIP 0.1uF
25V
1-104-664-11 ELECT
47uF
20.00% 16V
1-164-004-11 CERAMIC CHIP 0.1uF
10%
25V
(SE100,SE200V1/V2,SE250B,SE400K,SE450,SX100K)
1-109-982-11 CERAMIC CHIP 1uF
10.00% 10V
(SE200G/I,SE250D/P,SE300,SX250D)
C107
1-124-589-11 ELECT
C108
1-127-573-91
C113
1-163-021-91
C114
1-163-021-91
C115
1-163-038-91
C120
1-163-021-91 CERAMIC CHIP 0.01uF
10.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
1-163-021-91 CERAMIC CHIP 0.01uF
10.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
1-104-664-11 ELECT
47uF
20.00% 16V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
1-163-021-91 CERAMIC CHIP 0.01uF
10.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
1-124-589-11 ELECT
47uF
20%
16V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C121
C122
C123
C131
C133
C134
C140
C141
C142
1-163-021-91 CERAMIC CHIP 0.01uF
10.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
1-163-021-91 CERAMIC CHIP 0.01uF
10.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
1-126-933-11 ELECT
100uF
20.00% 16V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
1-163-021-91 CERAMIC CHIP 0.01uF
10.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
1-163-037-11 CERAMIC CHIP 0.022uF 10%
25V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C143
1-126-965-11 ELECT
C144
1-126-965-11
C145
1-126-933-11
C146
1-164-161-11
22uF
20.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
ELECT
22uF
20.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
ELECT
100uF
20.00% 16V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
CERAMIC CHIP 0.0022uF 10%
100V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
CERAMIC CHIP 0.01uF
10.00% 50V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
C148
1-163-021-91
C149
1-126-934-11 ELECT
C150
C160
C161
C162
1-126-963-11
1-163-021-91
1-163-021-91
1-104-905-11
220uF
20.00% 16V
(SE100A1/A2,SE200,SE250,SE300,
SE400K,SE450,SX100K,SX250D)
ELECT
4.7uF
20.00% 50V
CERAMIC CHIP 0.01uF
10.00% 50V
CERAMIC CHIP 0.01uF
10.00% 50V
CAPACITOR
0.22F
5.5V
7-7
C205
C221
Remarks
C222
C223
C224
C225
C226
1-109-982-11
1-163-038-91
1-163-021-91
1-124-589-11
1-163-021-91
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
1uF
0.1uF
0.01uF
47uF
0.01uF
10.00% 10V
25V
10.00% 50V
20%
16V
10.00% 50V
C227
C228
C229
C230
C231
1-124-589-11
1-163-131-00
1-164-004-11
1-163-038-91
1-109-982-11
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47uF
390PF
0.1uF
0.1uF
1uF
20%
5%
10%
C232
C233
C234
C235
C236
1-109-982-11
1-164-004-11
1-163-021-91
1-109-982-11
1-163-243-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.1uF
0.01uF
1uF
47PF
10.00%
10%
10.00%
10.00%
5.00%
C237
C238
C239
1-164-004-11 CERAMIC CHIP
1-124-261-00 ELECT
1-163-243-11 CERAMIC CHIP
C240
C241
0.1uF
10uF
47PF
16V
50V
25V
25V
10.00% 10V
10V
25V
50V
10V
50V
10%
25V
20%
50V
5.00% 50V
(SE300)
1-163-243-11 CERAMIC CHIP 47PF
5.00% 50V
(SE250,SE300,SE450B/D/P,SX250D)
1-164-004-11 CERAMIC CHIP 0.1uF
10%
25V
(SE300)
MA-372
Ref. No.
Remarks
Ref. No.
Part No.
Description
C243
C244
C245
C246
1-164-004-11 CERAMIC CHIP 0.1uF
10%
25V
(SE250,SE300,SE450B/D/P,SX250D)
1-163-809-11 CERAMIC CHIP 0.047uF 10%
25V
1-163-021-91 CERAMIC CHIP 0.01uF
10.00% 50V
1-164-004-11 CERAMIC CHIP 0.1uF
10%
25V
1-163-021-91 CERAMIC CHIP 0.01uF
10.00% 50V
C502
C510
C511
C512
C513
1-163-017-00
1-163-021-91
1-104-664-11
1-104-664-11
1-126-935-11
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
ELECT
C247
C248
C249
C250
C251
1-163-021-91
1-124-589-11
1-126-157-11
1-124-589-11
1-126-965-11
CERAMIC CHIP
ELECT
ELECT
ELECT
ELECT
0.01uF
47uF
10uF
47uF
22uF
10.00%
20%
20%
20%
20.00%
C570
C571
C572
C580
1-163-017-00
1-163-017-00
1-163-017-00
1-124-261-00
C252
C253
1-109-982-11 CERAMIC CHIP
1-163-133-00 CERAMIC CHIP
1uF
470PF
C255
C271
1-163-021-91 CERAMIC CHIP
1-163-021-91 CERAMIC CHIP
0.01uF
0.01uF
C272
1-164-004-11 CERAMIC CHIP
0.1uF
10.00% 10V
5%
50V
(SE250B,SE450B)
10.00% 50V
10.00% 50V
(SE400K,SE450)
10%
25V
(SE400K,SE450)
C242
Part No.
Description
50V
16V
16V
16V
50V
C581
C275
C276
C278
C279
C280
1-163-021-91
1-164-004-11
1-163-037-11
1-164-004-11
1-124-584-00
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
0.01uF
0.1uF
0.022uF
0.1uF
100uF
10.00%
10%
10%
10%
20%
50V
25V
25V
25V
10V
C281
C282
C283
C284
C285
1-163-021-91
1-163-021-91
1-163-021-91
1-164-489-11
1-163-021-91
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.01uF
0.01uF
0.22uF
0.01uF
10.00%
10.00%
10.00%
10.00%
10.00%
50V
50V
50V
16V
50V
C288
C289
C350
C351
C352
1-163-251-11
1-163-233-11
1-164-489-11
1-104-664-11
1-163-038-91
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
CERAMIC CHIP
100PF
18PF
0.22uF
47uF
0.1uF
5.00%
5.00%
10.00%
20.00%
50V
50V
16V
16V
25V
C353
1-164-489-11 CERAMIC CHIP
0.22uF
C354
C355
C356
C357
1-126-964-11
1-164-489-11
1-126-966-11
1-126-963-11
ELECT
CERAMIC CHIP
ELECT
ELECT
10uF
0.22uF
33uF
4.7uF
10.00% 16V
(SE300)
20.00% 50V
10.00% 16V
20.00% 16V
20.00% 50V
C358
C359
C360
C362
C363
1-109-982-11
1-163-011-11
1-163-011-11
1-104-664-11
1-126-963-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
1uF
0.0015uF
0.0015uF
47uF
4.7uF
10.00%
10%
10%
20.00%
20.00%
10V
50V
50V
16V
50V
C364
C365
C366
C367
C380
1-126-964-11
1-163-021-91
1-126-960-11
1-163-021-91
1-137-374-11
ELECT
CERAMIC CHIP
ELECT
CERAMIC CHIP
MYLAR
10uF
0.01uF
1uF
0.01uF
0.047uF
20.00%
10.00%
20.00%
10.00%
5.00%
50V
50V
50V
50V
50V
C381
C382
C383
C420
C421
1-163-021-91
1-163-021-91
1-104-664-11
1-124-589-11
1-163-235-11
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
CERAMIC CHIP
0.01uF
0.01uF
47uF
47uF
22PF
10.00%
10.00%
20.00%
20%
5.00%
50V
50V
16V
16V
50V
C422
C423
C424
C427
C500
1-164-004-11
1-163-021-91
1-126-157-11
1-104-664-11
1-163-017-00
CERAMIC CHIP
CERAMIC CHIP
ELECT
ELECT
CERAMIC CHIP
0.1uF
0.01uF
10uF
47uF
0.0047uF
10%
10.00%
20%
20.00%
5%
25V
50V
16V
16V
50V
C582
C583
C584
C585
C586
5%
10.00%
20.00%
20.00%
20.00%
50V
50V
16V
16V
6.3V
CERAMIC CHIP 0.0047uF 5%
50V
CERAMIC CHIP 0.0047uF 5%
50V
CERAMIC CHIP 0.0047uF 5%
50V
ELECT
10uF
20%
50V
(SE250,SE300,SE450B/D/P,SX250D)
1-126-964-11 ELECT
10uF
20.00% 50V
(SE250,SE300,SE450B/D/P,SX250D)
1-126-964-11 ELECT
10uF
20.00% 50V
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
1-126-964-11 ELECT
10uF
20.00% 50V
(SE250,SE300,SE450B/D/P,SX250D)
1-164-004-11 CERAMIC CHIP 0.1uF
10%
25V
(SE250,SE300,SE450B/D/P,SX250D)
1-126-964-11 ELECT
10uF
20.00% 50V
(SE250,SE300,SE450B/D/P,SX250D)
1-126-964-11 ELECT
10uF
20.00% 50V
(SE250,SE300,SE450B/D/P,SX250D)
C587
1-126-964-11 ELECT
C588
1-126-964-11
C601
C603
C604
1-163-021-91
1-128-131-11
1-104-664-11
10uF
20.00% 50V
(SE250,SE300,SE450B/D/P,SX250D)
ELECT
10uF
20.00% 50V
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
CERAMIC CHIP 0.01uF
10.00% 50V
ELECT
22uF
20.00% 50V
ELECT
47uF
20.00% 16V
C605
C607
C611
C612
C613
1-126-964-11
1-163-021-91
1-104-664-11
1-163-021-91
1-126-933-11
ELECT
CERAMIC CHIP
ELECT
CERAMIC CHIP
ELECT
10uF
0.01uF
47uF
0.01uF
100uF
20.00%
10.00%
20.00%
10.00%
20.00%
50V
50V
16V
50V
16V
C615
C620
C660
C661
C662
1-126-965-11
1-164-004-11
1-163-233-11
1-163-233-11
1-163-017-00
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
22uF
0.1uF
18PF
18PF
0.0047uF
20.00%
10%
5.00%
5.00%
5%
50V
25V
50V
50V
50V
C663
C664
C665
C666
C667
1-163-021-91 CERAMIC CHIP 0.01uF
10.00% 50V
1-164-004-11 CERAMIC CHIP 0.1uF
10%
25V
1-163-245-11 CERAMIC CHIP 56PF
5.00% 50V
(SE100K,SE250B,SE400K,SE450B/K,SX100K)
1-163-135-00 CERAMIC CHIP 560PF
5%
50V
1-163-021-91 CERAMIC CHIP 0.01uF
10.00% 50V
C668
C669
C670
C671
C672
1-124-584-00
1-163-016-00
1-109-982-11
1-163-235-11
1-163-021-91
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100uF
0.0039uF
1uF
22PF
0.01uF
20%
10%
10.00%
5.00%
10.00%
10V
50V
10V
50V
50V
C701
C704
C705
C708
C709
1-126-964-11
1-126-964-11
1-163-809-11
1-104-664-11
1-163-021-91
ELECT
ELECT
CERAMIC CHIP
ELECT
CERAMIC CHIP
10uF
10uF
0.047uF
47uF
0.01uF
20.00%
20.00%
10%
20.00%
10.00%
50V
50V
25V
16V
50V
C710
1-126-965-11 ELECT
22uF
20.00% 50V
(SE100A1/A2,SE200,SE250,SE300,SE450B/D/P,SX250D)
1-128-131-11 ELECT
22uF
20.00% 50V
1-126-933-11 ELECT
100uF
20.00% 16V
1-164-004-11 CERAMIC CHIP 0.1uF
10%
25V
1-126-935-11 ELECT
470uF
20.00% 6.3V
C721
C752
C753
C754
7-8
Remarks
0.0047uF
0.01uF
47uF
47uF
470uF
MA-372
Ref. No.
C801
C850
C851
C852
C853
C855
C856
C970
C971
C972
Part No.
Remarks
Ref. No.
1-163-021-91 CERAMIC CHIP 0.01uF
10.00% 50V
(SE200,SE250,SE300,SE450,SX250D)
1-163-038-91 CERAMIC CHIP 0.1uF
25V
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
1-124-261-00 ELECT
10uF
20%
50V
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
1-164-161-11 CERAMIC CHIP 0.0022uF 10%
100V
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
1-163-989-11 CERAMIC CHIP 0.033uF 10%
25V
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
Description
C995
1-126-157-11 ELECT
10uF
C996
1-163-227-11 CERAMIC CHIP
10PF
1-164-489-11 CERAMIC CHIP 0.22uF
10.00% 16V
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
1-163-038-91 CERAMIC CHIP 0.1uF
25V
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
1-163-259-91 CERAMIC CHIP 220PF
5.00% 50V
(SE250B,SE450B)
1-124-257-00 ELECT
2.2uF
20%
50V
(SE250B,SE450B)
1-163-017-00 CERAMIC CHIP 0.0047uF 5%
50V
(SE250B,SE450B)
C973
1-163-021-91 CERAMIC CHIP
0.01uF
C974
1-109-982-11 CERAMIC CHIP
1uF
C975
1-163-037-11 CERAMIC CHIP
0.022uF
C976
1-163-259-91 CERAMIC CHIP
220PF
C977
1-163-021-91 CERAMIC CHIP
0.01uF
C978
1-163-017-00 CERAMIC CHIP
C979
1-163-255-11 CERAMIC CHIP
C980
1-164-004-11 CERAMIC CHIP
C981
1-163-021-91 CERAMIC CHIP
C982
1-163-007-11 CERAMIC CHIP
0.0047uF 5%
50V
(SE250B,SE450B)
150PF
5.00% 50V
(SE250B,SE450B)
0.1uF
10%
25V
(SE250B,SE450B)
0.01uF
10.00% 50V
(SE250B,SE450B)
680PF
10%
50V
(SE250B,SE450B)
C983
1-163-009-11 CERAMIC CHIP
0.001uF
C984
1-163-021-91 CERAMIC CHIP
0.01uF
C985
1-163-251-11 CERAMIC CHIP
100PF
C986
1-126-157-11 ELECT
10uF
C987
1-107-823-11 CERAMIC CHIP
0.47uF
C988
1-163-251-11 CERAMIC CHIP
100PF
C991
1-164-004-11 CERAMIC CHIP
0.1uF
C992
1-163-021-91 CERAMIC CHIP
0.01uF
C993
1-163-021-91 CERAMIC CHIP
0.01uF
C994
1-163-021-91 CERAMIC CHIP
0.01uF
Part No.
Description
Remarks
20%
16V
(SE250B,SE450B)
0.50PF 50V
(SE250B,SE450B)
< CONNECTOR >
CN101
CN102
* CN104
CN161
CN261
1-695-328-11
1-779-723-11
1-766-716-11
1-506-469-11
1-793-919-11
HOUSING, CONNECTOR 5P
CONNECTOR, BOARD TO BOARD 9P
CONNECTOR, BOARD TO BOARD 3P
PIN, CONNECTOR 4P
CONNECTOR, FFC/FPC 6P
* CN262
CN350
CN351
CN460
CN500
1-560-893-00
1-784-486-11
1-506-468-11
1-506-469-11
1-793-918-11
PIN, CONNECTOR 5P
CONNECTOR, FFC/FPC 7P
PIN, CONNECTOR 3P
PIN, CONNECTOR 4P (SE300,SE450B/D/P)
CONNECTOR, SQUARE TYPE 21P
* CN501
CN570
1-568-955-11 PIN, CONNECTOR 6P (SE300)
1-793-918-11 CONNECTOR, SQUARE TYPE 21P
(SE250,SE300,SE450B/D/P,SX250D)
1-794-172-11 CONNECTOR, SQUARE TYPE 21P
(SE250,SE300,SE450B/D/P,SX250D)
1-569-340-11 CONNECTOR, BOARD TO BOARD 11P
10.00% 50V
(SE250B,SE450B)
10.00% 10V
(SE250B,SE450B)
10%
25V
(SE250B,SE450B)
5.00% 50V
(SE250B,SE450B)
10.00% 50V
(SE250B,SE450B)
10%
50V
(SE250B,SE450B)
10.00% 50V
(SE250B,SE450B)
5.00% 50V
(SE250B,SE450B)
20%
16V
(SE250B,SE450B)
10.00% 16V
(SE250B,SE450B)
CN570
CN600
< DIODE >
D100
D110
D140
D420
D421
8-719-048-26
8-719-200-82
8-719-988-61
8-719-045-62
8-719-988-61
DIODE
DIODE
DIODE
DIODE
DIODE
GL528V1
MPG06D-6052PKG3
1SS355TE-17
SLR-342VCT31
(SE300)
1SS355TE-17
(SE300)
D424
D500
D504
D505
D508
8-719-067-40
8-719-067-40
8-719-067-40
8-719-070-59
8-719-070-59
DIODE
DIODE
DIODE
DIODE
DIODE
STZ6.8N-T146
STZ6.8N-T146
STZ6.8N-T146
PDZ6.8B-115
PDZ6.8B-115
D511
D512
D513
D514
D515
8-719-070-59
8-719-977-40
8-719-067-40
8-719-977-40
8-719-067-40
DIODE
DIODE
DIODE
DIODE
DIODE
PDZ6.8B-115
UDZ-TE-17-13B
STZ6.8N-T146
UDZ-TE-17-13B
STZ6.8N-T146
D540
8-719-067-40 DIODE STZ6.8N-T146
(SE250,SE300,SE450B/D/P,SX250D)
8-719-067-40 DIODE STZ6.8N-T146
(SE250,SE300,SE450B/D/P,SX250D)
8-719-070-59 DIODE PDZ6.8B-115
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
8-719-070-59 DIODE PDZ6.8B-115
(SE250,SE300,SE450B/D/P,SX250D)
8-719-067-40 DIODE STZ6.8N-T146
(SE250,SE300,SE450B/D/P,SX250D)
D542
D544
D570
D571
5.00% 50V
(SE250B,SE450B)
10%
25V
(SE250B,SE450B)
10.00% 50V
(SE250B,SE450B)
10.00% 50V
(SE250B,SE450B)
10.00% 50V
(SE250B,SE450B)
D575
D576
D590
D591
D600
D601
D602
D603
D606
D607
7-9
8-719-067-40 DIODE STZ6.8N-T146
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
8-719-977-40 DIODE UDZ-TE-17-13B
(SE250,SE300,SE450B/D/P,SX250D)
8-719-988-61 DIODE 1SS355TE-17
8-719-988-61 DIODE 1SS355TE-17
8-719-988-61 DIODE 1SS355TE-17
8-719-988-61 DIODE 1SS355TE-17
8-719-070-56 DIODE PDZ5.1B-115
8-719-075-84 DIODE S1G-G2P
(SE250,SE300,SE450B/D/P,SX250D)
8-719-075-84 DIODE S1G-G2P
8-719-075-84 DIODE S1G-G2P
MA-372
Ref. No.
D702
D750
D800
Part No.
Description
Remarks
Ref. No.
8-719-982-26 DIODE MTZJ-T-77-33
8-719-075-84 DIODE S1G-G2P
8-719-988-61 DIODE 1SS355TE-17
(SE200,SE250,SE300,SE450,SX250D)
Part No.
Description
JR015
JR017
JR018
1-216-296-91 SHORT
1-216-296-91 SHORT
1-216-296-91 SHORT
JR019
1-216-296-91 SHORT
JR020
1-216-296-91 SHORT
JR021
JR022
JR024
JR025
1-216-296-91
1-216-296-91
1-216-296-91
1-216-296-91
< TERMINAL BOARD >
ET600
1-537-770-21 TERMINAL BOARD, GROUND
< FILTER >
FL500
FL502
FL570
FL572
1-236-163-11 ENCAPSULATED COMPONENT
1-236-163-11 ENCAPSULATED COMPONENT
1-236-163-11 ENCAPSULATED COMPONENT
(SE250,SE300,SE450B/D/P,SX250D)
1-236-163-11 ENCAPSULATED COMPONENT
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
< IC >
IC130
IC160
IC161
IC162
IC162
IC200
IC260
IC260
IC350
IC420
IC460
IC580
0 IC601
IC850
IC970
Remarks
0 (SE250B,SE450B)
0 (SE250B,SE450B)
0
(SE250,SE300,SE450B/D/P,SX250D)
0
(SE250,SE300,SE450B/D/P,SX250D)
0
8-759-645-07
8-759-248-87
8-759-575-72
8-759-638-61
IC
IC
IC
IC
LB1943N
MM1256XF-BE
M24C08-WMN6T
M37760MFH210GP
(SE100,SE400K,SX100K)
8-759-638-62 IC M37760MFH215GP
(SE200,SE250,SE300,SE450,SX250D)
8-759-638-71 IC LA71562M-MPB
8-759-549-79 IC LA70001
(SE100,SE200,SE250,SE300,SX100K,SX250D)
8-759-564-36 IC LA70011
(SE400K,SE450)
8-759-499-30 IC BA7755AF-E2
8-759-547-59 IC M35500BGP
8-749-015-48 IC RPM6940
8-759-009-07 IC MC14053BFEL
(SE250,SE300,SE450B/D/P,SX250D)
8-759-438-18 IC PQ12RD08
8-759-484-61 IC SDA5650X-GEG
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
8-759-438-17 IC LA7337
(SE250B,SE450B)
< JUMPER RESISTOR >
JR001
JR005
JR006
JR008
JR009
1-216-296-91
1-216-296-91
1-216-296-91
1-216-296-91
1-216-296-91
SHORT
SHORT
SHORT
SHORT
SHORT
JR002
JR003
1-216-296-91 SHORT
1-216-296-91 SHORT
JR004
1-216-296-91 SHORT
JR007
JR010
1-216-296-91 SHORT
1-216-296-91 SHORT
JR011
JR012
JR013
JR016
JR014
1-216-296-91
1-216-296-91
1-216-296-91
1-216-296-91
1-216-296-91
SHORT
SHORT
SHORT
SHORT
SHORT
0
0
0
0
0
0 (SE250B,SE450B)
0
(SE250,SE300,SE450B/D/P,SX250D)
0
(SE250,SE300,SE450B/D/P,SX250D)
0 (SE250B,SE450B)
0
0
0
0
0
0 (SE250B,SE450B)
JR026
SHORT
0
SHORT
0
SHORT
0
SHORT
0
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
1-216-296-91 SHORT
0
JR027
JR028
JR029
JR023
JR030
1-216-296-91
1-216-296-91
1-216-296-91
1-216-296-91
1-216-296-91
SHORT
SHORT
SHORT
SHORT
SHORT
0
0
0
0 (SE250B,SE450B)
0
JR031
JR032
JR034
JR036
JR038
1-216-296-91
1-216-296-91
1-216-296-91
1-216-296-91
1-216-296-91
SHORT
SHORT
SHORT
SHORT
SHORT
0
0
0
0
0
JR039
JR033
1-216-296-91 SHORT
1-216-296-91 SHORT
JR035
JR040
JR042
1-216-296-91 SHORT
1-216-296-91 SHORT
1-216-296-91 SHORT
JR043
JR044
JR041
1-216-296-91 SHORT
1-216-296-91 SHORT
1-216-296-91 SHORT
JR201
JR202
1-216-295-91 SHORT
1-216-295-91 SHORT
JR203
JR204
JR205
JR206
JR207
1-216-295-91
1-216-295-91
1-216-295-91
1-216-295-91
1-216-295-91
JR209
JR208
1-216-295-91 SHORT
1-216-295-91 SHORT
JR210
JR211
JR212
1-216-295-91 SHORT
1-216-295-91 SHORT
1-216-295-91 SHORT
JR213
JR216
JR218
JR219
JR214
1-216-295-91
1-216-295-91
1-216-295-91
1-216-295-91
1-216-295-91
JR215
JR217
1-216-295-91 SHORT
1-216-295-91 SHORT
JR220
JR221
JR222
1-216-295-91 SHORT
1-216-295-91 SHORT
1-216-295-91 SHORT
Note :
7-10
SHORT
SHORT
SHORT
SHORT
SHORT
SHORT
SHORT
SHORT
SHORT
SHORT
0
0
(SE250,SE300,SE450B/D/P,SX250D)
0 (SE250B,SE450B)
0
0
0
0
0
(SE250,SE300,SE450B/D/P,SX250D)
0
0
0
0
0
0
0
0
0
(SE250,SE300,SE450B/D/P,SX250D)
0
0
0
0
0
0
0
0 (SE250B,SE450B)
0 (SE250B,SE450B)
0
(SE250,SE300,SE450B/D/P,SX250D)
0
0
0
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
MA-372
Ref. No.
JR226
JR227
JR228
JR229
JR223
JR230
JR231
JR232
Part No.
Description
1-216-295-91
1-216-295-91
1-216-295-91
1-216-295-91
1-216-295-91
SHORT
SHORT
SHORT
SHORT
SHORT
1-216-295-91 SHORT
1-216-296-91 SHORT
1-216-296-91 SHORT
Remarks
JS581
PH100
PH101
0
(SE100,SE200,SE400K,SE450K,SX100K)
1-216-295-91 SHORT
0
(SE100,SE200,SE400K,SE450K,SX100K)
1-414-936-21
1-414-936-21
1-414-936-21
1-414-946-21
1-414-940-21
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
22uH
22uH
22uH
39uH
100uH
L202
L203
L204
L205
L206
1-414-934-21
1-414-934-21
1-414-934-21
1-414-934-21
1-414-938-21
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
10uH
10uH
10uH
10uH
47uH (SE250B,SE450B)
L270
L271
L350
L380
L460
1-414-940-21
1-414-930-21
1-414-940-21
1-414-940-21
1-414-938-21
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
100uH
2.2uH
100uH
100uH
47uH
L510
L580
1-414-940-21 INDUCTOR
1-414-940-21 INDUCTOR
8-749-015-86 PHOTO INTERRUPTER GP3S120S
8-749-015-86 PHOTO INTERRUPTER GP3S120S
1-532-605-00
1-532-637-00
1-532-605-00
1-532-727-11
1-532-727-11
LINK, IC
LINK, IC
LINK, IC
LINK, IC
LINK, IC
0.4A
1.0A
0.4A
0.25A
0.25A
(SE250,SE300,SE450B/D/P,SX250D)
< TRANSISTOR >
Q100
Q101
Q102
Q103
Q104
8-729-043-84
8-729-043-84
8-729-281-53
1-801-806-11
8-729-216-22
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
PT380F3
PT380F3
2SC1815GR-TPE2
DTC144EKA-T146
2PB709AR-115
Q200
Q201
Q202
Q203
Q204
8-729-422-33
8-729-422-33
8-729-422-33
8-729-216-22
1-801-806-11
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2PD601AR-115
2PD601AR-115
2PD601AR-115
2PB709AR-115
DTC144EKA-T146
(SE250B,SE450B)
Q350
Q380
Q501
Q502
Q510
8-729-281-53
8-729-802-91
8-729-027-23
1-801-806-11
8-729-216-22
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
2SC1815GR-TPE2
2SD879-AA
DTA114EKA-T146
DTC144EKA-T146
2PB709AR-115
Q540
8-729-216-22 TRANSISTOR
2PB709AR-115
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
8-729-216-22 TRANSISTOR
2PB709AR-115
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
1-801-806-11 TRANSISTOR
DTC144EKA-T146
(SE250,SE300,SE450B/D/P,SX250D)
1-801-806-11 TRANSISTOR
DTC144EKA-T146
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
1-801-806-11 TRANSISTOR
DTC144EKA-T146
(SE250,SE300,SE450B/D/P,SX250D)
Q541
100uH
100uH
(SE250,SE300,SE450B/D/P,SX250D)
1-414-934-21 INDUCTOR
10uH
1-414-930-21 INDUCTOR
2.2uH
1-414-936-21 INDUCTOR
22uH
(SE100K,SE250B,SE400K,SE450B/K,SX100K)
L662
L663
L701
L720
L721
1-414-936-21
1-414-936-21
1-414-930-21
1-414-939-21
1-414-936-21
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
22uH
22uH
2.2uH
68uH
22uH
L750
L970
L971
L972
L973
1-414-930-21
1-414-933-21
1-414-945-21
1-414-938-21
1-414-938-21
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
2.2uH
6.8uH (SE250B,SE450B)
27uH (SE250B,SE450B)
47uH (SE250B,SE450B)
47uH (SE250B,SE450B)
L975
1-414-934-21 INDUCTOR
10uH (SE250B,SE450B)
ND420
Remarks
1-216-295-91 SHORT
L140
L160
L161
L200
L201
ND420
Description
< IC LINK >
< COIL >
L601
L660
L661
Part No.
< PHOTO INTERRUPTER >
0 PS120
0 PS600
0 PS601
0 PS603
0 PS602
0
0
0
< JUMPER RESISTOR >
JS580
Ref. No.
0
0
0
0
0
(SE250,SE300,SE450B/D/P,SX250D)
Q580
Q581
Q582
Q583
Q591
Q600
0 Q601
Q602
8-729-422-33 TRANSISTOR
2PD601AR-115
(SE250,SE300,SE450B/D/P,SX250D)
8-729-422-33 TRANSISTOR
2PD601AR-115
8-729-018-99 TRANSISTOR
2SD2394-F
8-729-140-93 TRANSISTOR
2SB733-T-34
8-729-140-96 TRANSISTOR
2SD774-T-4
Q603
Q604
Q605
Q606
Q607
8-729-422-33
8-729-119-79
8-729-027-23
1-801-806-11
8-729-804-41
< FLUORESCENT INDICATOR >
Q608
1-517-832-11 INDICATOR TUBE, FLUORESCENT
(SE100K,SE400K,SE450K,SX100K)
1-517-833-11 INDICATOR TUBE, FLUORESCENT
(SE100A1/A2,SE200,SE250,SE300,SE450B/D/P,SX250D)
Q611
Q612
Q613
Q660
1-801-806-11 TRANSISTOR
DTC144EKA-T146
(SE250,SE300,SE450B/D/P,SX250D)
8-729-422-33 TRANSISTOR
2PD601AR-115
8-729-804-41 TRANSISTOR
2SB1122-ST-TD
1-801-806-11 TRANSISTOR
DTC144EKA-T146
8-729-216-22 TRANSISTOR
2PB709AR-115
Note :
7-11
TRANSISTOR
2PD601AR-115
TRANSISTOR
2SC2785TP-FEK
TRANSISTOR
DTA114EKA-T146
TRANSISTOR
DTC144EKA-T146
TRANSISTOR
2SB1122-ST-TD
(SE250,SE300,SE450B/D/P,SX250D)
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
MA-372
Ref. No.
Part No.
Description
Q661
Q720
Q721
Q751
Q752
8-729-216-22
8-729-119-76
8-729-422-33
1-801-806-11
8-729-216-22
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
Q800
Remarks
Ref. No.
2PB709AR-115
2SA1309A-QRSTA
2PD601AR-115
DTC144EKA-T146
2PB709AR-115
Part No.
Description
Remarks
R160
1-216-053-00 METAL CHIP
1.5K
R160
1-216-061-00 METAL CHIP
3.3K
R161
1-216-075-00 METAL CHIP
12K
8-729-216-22 TRANSISTOR
2PB709AR-115
(SE200,SE250,SE300,SE450,SX250D)
8-729-422-33 TRANSISTOR
2PD601AR-115
(SE200,SE250,SE300,SE450,SX250D)
8-729-422-33 TRANSISTOR
2PD601AR-115
(SE200,SE250,SE300,SE450,SX250D)
8-729-422-33 TRANSISTOR
2PD601AR-115
(SE200,SE250,SE300,SE450,SX250D)
1-801-806-11 TRANSISTOR
DTC144EKA-T146
(SE200,SE250,SE300,SE450,SX250D)
R161
1-216-067-00 METAL CHIP
5.6K
R161
1-216-071-00 METAL CHIP
8.2K
R161
1-216-295-91 SHORT
R161
1-216-061-00
R161
1-216-053-00
8-729-216-22 TRANSISTOR
2PB709AR-115
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
8-729-216-22 TRANSISTOR
2PB709AR-115
(SE250B,SE450B)
8-729-027-23 TRANSISTOR
DTA114EKA-T146
(SE250B,SE450B)
8-729-422-33 TRANSISTOR
2PD601AR-115
(SE250B,SE450B)
8-729-422-33 TRANSISTOR
2PD601AR-115
(SE250B,SE450B)
R162
R163
1-216-073-00
1-216-073-00
R164
R165
1-216-073-00 METAL CHIP
1-216-061-00 METAL CHIP
10K
3.3K
R166
1-216-061-00 METAL CHIP
3.3K
R167
R168
1-216-069-00 METAL CHIP
1-216-101-00 METAL CHIP
6.8K
150K
Q975
8-729-027-23 TRANSISTOR
Q976
1-801-806-11 TRANSISTOR
R169
R170
R171
R176
R177
1-216-113-00
1-216-061-00
1-216-073-00
1-216-037-00
1-216-041-00
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
470K
3.3K
10K
330
470
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R178
R179
R180
R181
R182
1-216-041-00
1-216-041-00
1-216-069-00
1-216-061-00
1-216-041-00
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
470
470
6.8K
3.3K
470
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R183
R184
R185
R189
R196
1-216-041-00
1-216-295-91
1-216-295-91
1-216-049-91
1-216-061-00
METAL CHIP
SHORT
SHORT
RES-CHIP
METAL CHIP
470
0
0
1K
3.3K
5%
1/10W
5%
5%
1/10W
1/10W
R200
R203
R204
R205
R206
1-216-073-00
1-216-055-00
1-216-037-00
1-216-037-00
1-216-047-91
METAL CHIP
10K
5%
1/10W
METAL CHIP
1.8K
5%
1/10W
METAL CHIP
330
5%
1/10W
METAL CHIP
330
5%
1/10W
RES-CHIP
820
5%
1/10W
(SE100,SE200,SE250,SE300,SX100K,SX250D)
R206
1-216-045-00 METAL CHIP
R207
1-216-047-91
R207
1-216-059-00
R208
R209
1-216-065-91
1-216-055-00
5%
1/10W
(SE400K,SE450)
RES-CHIP
820
5%
1/10W
(SE100,SE200,SE250,SE300,SX100K,SX250D)
METAL CHIP
2.7K
5%
1/10W
(SE400K,SE450)
RES-CHIP
4.7K
5%
1/10W
METAL CHIP
1.8K
5%
1/10W
R210
R211
R212
R213
R214
1-216-043-91
1-216-071-00
1-216-051-00
1-216-041-00
1-216-041-00
RES-CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
Q801
Q802
Q803
Q804
Q850
Q970
Q972
Q973
Q974
DTA114EKA-T146
(SE250B,SE450B)
DTC144EKA-T146
(SE250B,SE450B)
5%
1/10W
(SE450D/P)
5%
1/10W
(SE300G,SE200G/I)
5%
1/10W
(SE30OD1/D2)
5%
1/10W
(SE250D,SX250D)
5%
1/10W
(SE200I)
0
(SE100,SE250B,SE450P,SX100K)
METAL CHIP
3.3K
5%
1/10W
(SE200V1/V2,SE300G,SE450B/K)
METAL CHIP
1.5K
5%
1/10W
(SE200G,SE250P,SE400K,SE450D)
METAL CHIP
10K
5%
1/10W
METAL CHIP
10K
5%
1/10W
5%
1/10W
5%
1/10W
(SE300,SE450B/D/P)
5%
1/10W
(SE300,SE450B/D/P)
5%
1/10W
5%
1/10W
< RESISTOR >
R100
R101
R102
R103
R104
1-216-077-91
1-249-413-11
1-216-077-91
1-216-081-00
1-216-049-91
RES-CHIP
CARBON
RES-CHIP
METAL CHIP
RES-CHIP
15K
470
15K
22K
1K
5%
5%
5%
5%
5%
1/10W
1/4W F
1/10W
1/10W
1/10W
R105
R106
R107
R108
R110
1-216-057-00
1-249-400-11
1-249-400-11
1-216-081-00
1-216-057-00
METAL CHIP
CARBON
CARBON
METAL CHIP
METAL CHIP
2.2K
39
39
22K
2.2K
5%
5%
5%
5%
5%
1/10W
1/4W F
1/4W F
1/10W
1/10W
R111
R114
R115
R120
R121
1-216-089-91
1-216-089-91
1-216-089-91
1-216-089-91
1-216-089-91
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
47K
47K
47K
47K
47K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R123
R124
R130
R132
R133
1-216-065-91
1-216-041-00
1-216-077-91
1-216-041-00
1-216-089-91
RES-CHIP
METAL CHIP
RES-CHIP
METAL CHIP
RES-CHIP
4.7K
470
15K
470
47K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R142
R143
R160
1-216-051-00 METAL CHIP
1.2K
5%
1/10W
1-216-065-91 RES-CHIP
4.7K
5%
1/10W
1-216-295-91 SHORT
0
(SE100A1/A2,SE200V1/V2,SE250D/P,SE300D1/D2,SX250D)
1-216-071-00 METAL CHIP
8.2K
5%
1/10W
(SE100K,SE400K,SE450K,SX100K)
1-216-067-00 METAL CHIP
5.6K
5%
1/10W
(SE250B,SE450B)
R160
R160
7-12
680
560
8.2K
1.2K
470
470
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
MA-372
Ref. No.
Remarks
Ref. No.
Part No.
Description
R358
R359
R362
R363
R364
1-216-055-00
1-216-065-91
1-216-051-00
1-216-079-00
1-216-035-00
METAL CHIP
RES-CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1.8K
4.7K
1.2K
18K
270
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R218
1-216-025-91 RES-CHIP
100
5%
1/10W
1-216-117-00 METAL CHIP
680K
5%
1/10W
(SE100,SE200,SE250,SE300,SX100K,SX250D)
1-216-109-00 METAL CHIP
330K
5%
1/10W
(SE400K,SE450)
1-216-025-91 RES-CHIP
100
5%
1/10W
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
1-216-295-91 SHORT
0
R219
R220
R221
R222
1-216-017-91
1-216-049-91
1-216-017-91
1-216-017-91
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
47
1K
47
47
R365
R366
R367
R368
R370
1-216-109-00
1-216-073-00
1-216-069-00
1-216-047-91
1-216-075-00
METAL CHIP
METAL CHIP
METAL CHIP
RES-CHIP
METAL CHIP
330K
10K
6.8K
820
12K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R371
R380
R381
R382
R383
1-216-079-00
1-216-017-91
1-216-063-91
1-217-671-11
1-216-031-00
METAL CHIP
RES-CHIP
RES-CHIP
METAL CHIP
METAL CHIP
18K
47
3.9K
1
180
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R224
R225
R226
R227
R228
1-216-057-00
1-216-057-00
1-216-055-00
1-216-295-91
1-216-295-91
METAL CHIP
METAL CHIP
METAL CHIP
SHORT
SHORT
2.2K
5%
1/10W
2.2K
5%
1/10W
1.8K
5%
1/10W
0
0 (SE250B,SE450B)
R420
R421
R422
R423
R424
1-216-295-91
1-216-295-91
1-216-049-91
1-216-295-91
1-216-295-91
SHORT
SHORT
RES-CHIP
SHORT
SHORT
0
0
1K
5%
1/10W
0
0 (SE300,SE450B/D/P)
R232
R425
R426
1-216-295-91 SHORT
1-216-041-00 METAL CHIP
R235
R236
1-216-077-91 RES-CHIP
15K
5%
1/10W
(SE100,SE200,SE250,SE300,SX100K,SX250D)
1-216-085-00 METAL CHIP
33K
5%
1/10W
(SE400K,SE450)
1-216-065-91 RES-CHIP
4.7K
5%
1/10W
(SE250B,SE450B)
1-216-089-91 RES-CHIP
47K
5%
1/10W
1-216-089-91 RES-CHIP
47K
5%
1/10W
R427
R460
R461
1-216-017-91 RES-CHIP
1-216-073-00 METAL CHIP
1-216-037-00 METAL CHIP
0 (SE300,SE450B/D/P)
470
5%
1/10W
(SE300)
47
5%
1/10W
10K
5%
1/10W
330
5%
1/10W
R270
1-216-043-91 RES-CHIP
R271
R272
1-216-043-91
1-216-051-00
R462
R463
R464
R465
R466
1-216-049-91
1-216-053-00
1-216-057-00
1-216-061-00
1-216-295-91
1K
1.5K
2.2K
3.3K
0
R272
1-216-059-00
R272
1-216-055-00
R467
R468
R469
R273
R274
1-216-295-91 SHORT
0
1-216-067-00 METAL CHIP
5.6K
5%
1/10W
(SE100,SE200,SE250,SE300,SX100K,SX250D)
1-216-065-91 RES-CHIP
4.7K
5%
1/10W
(SE400K,SE450)
1-216-077-91 RES-CHIP
15K
5%
1/10W
(SE100,SE200,SE250,SE300,SX100K,SX250D)
1-216-071-00 METAL CHIP
8.2K
5%
1/10W
(SE400K,SE450)
R470
R471
1-216-295-91 SHORT
0
1-216-083-00 METAL CHIP
27K
5%
1/10W
1-216-089-91 RES-CHIP
47K
5%
1/10W
(SE100K,SE200,SE250,SE300,SE400K,SE450,SX100K,SX250D)
1-216-073-00 METAL CHIP
10K
5%
1/10W
1-216-037-00 METAL CHIP
330
5%
1/10W
R472
R473
R474
R475
R476
1-216-049-91
1-216-295-91
1-216-063-91
1-216-059-00
1-216-065-91
RES-CHIP
SHORT
RES-CHIP
METAL CHIP
RES-CHIP
1K
0
3.9K
2.7K
4.7K
5%
1/10W
5%
5%
5%
1/10W
1/10W
1/10W
R477
R478
R479
1-216-069-00 METAL CHIP
1-216-077-91 RES-CHIP
1-216-089-91 RES-CHIP
6.8K
15K
47K
5%
5%
5%
R500
R501
1-216-041-00 METAL CHIP
1-216-041-00 METAL CHIP
470
470
5%
5%
1/10W
1/10W
1/10W
(SE300)
1/10W
1/10W
R502
R510
1-216-041-00 METAL CHIP
470
5%
1/10W
1-249-407-11 CARBON
150
5%
1/4W F
(SE100,SE200G/V1/V2,SE300G,SE400K,SE450K,SX100K)
1-249-408-11 CARBON
180
5%
1/4W F
(SE250,SE200I,SE300D1/D2,SE450B/D/P,SX250D)
1-249-407-11 CARBON
150
5%
1/4W F
1-216-022-00 METAL CHIP
75
5%
1/10W
R215
R216
R216
R217
R223
R232
R233
R274
R276
R276
Part No.
Description
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
(SE300)
1-216-017-91 RES-CHIP
47
5%
1/10W
(SE250,SE300,SE450B/D/P,SX250D)
560
5%
1/10W
(SE400K,SE450)
RES-CHIP
560
5%
1/10W
METAL CHIP
1.2K
5%
1/10W
(SE100,SE200V1/V2,SE250B,SX100K)
METAL CHIP
2.7K
5%
1/10W
(SE400K,SE450)
METAL CHIP
1.8K
5%
1/10W
(SE200G/I,SE250D/P,SE300,SX250D)
R277
R278
R279
R280
R283
1-216-081-00
1-216-081-00
1-216-081-00
1-216-097-91
1-216-295-91
METAL CHIP
METAL CHIP
METAL CHIP
RES-CHIP
SHORT
22K
22K
22K
100K
0
R284
R286
R350
R351
R352
1-216-295-91
1-216-025-91
1-216-093-91
1-216-067-00
1-216-093-91
SHORT
RES-CHIP
RES-CHIP
METAL CHIP
RES-CHIP
0
100
68K
5.6K
68K
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
(SE300)
R353
1-216-067-00 METAL CHIP
5.6K
5%
R354
R355
R356
R357
1-216-129-00
1-216-093-91
1-216-067-00
1-216-071-00
2.2M
68K
5.6K
8.2K
5%
5%
5%
5%
1/10W
(SE300)
1/10W
1/10W
1/10W
1/10W
METAL CHIP
RES-CHIP
METAL CHIP
METAL CHIP
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
7-13
R510
R511
R512
R514
R515
R516
R517
R541
RES-CHIP
METAL CHIP
METAL CHIP
METAL CHIP
SHORT
Remarks
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1-216-037-00 METAL CHIP
330
5%
1/10W
1-216-049-91 RES-CHIP
1K
5%
1/10W
1-216-065-91 RES-CHIP
4.7K
5%
1/10W
1-216-022-00 METAL CHIP
75
5%
1/10W
1-216-025-91 RES-CHIP
100
5%
1/10W
(SE250,SE200I,SE300D1/D2,SE450B/D/P,SX250D)
MA-372
Ref. No.
R542
R543
R545
R546
R547
R548
R549
R570
R571
Remarks
Ref. No.
Part No.
Description
1-249-408-11 CARBON
180
5%
1/4W F
(SE250,SE200I,SE300D1/D2,SE450B/D/P,SX250D)
1-249-407-11 CARBON
150
5%
1/4W F
(SE250,SE200I,SE300D1/D2,SE450B/D/P,SX250D)
1-216-085-00 METAL CHIP
33K
5%
1/10W
(SE250,SE300,SE450B/D/P,SX250D)
1-216-089-91 RES-CHIP
47K
5%
1/10W
(SE250,SE300,SE450B/D/P,SX250D)
1-216-049-91 RES-CHIP
1K
5%
1/10W
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
Part No.
Description
R618
R622
R623
R624
R625
1-216-055-00
1-260-297-11
1-260-073-11
1-216-073-00
1-216-065-91
METAL CHIP
CARBON
CARBON
METAL CHIP
RES-CHIP
1.8K
2.7
5.6
10K
4.7K
5%
5%
5%
5%
5%
1/10W
1/2W
1/2W
1/10W
1/10W
R626
R660
R661
R662
R663
1-216-049-91
1-216-049-91
1-216-121-91
1-216-041-00
1-216-053-00
RES-CHIP
RES-CHIP
RES-CHIP
METAL CHIP
METAL CHIP
1K
1K
1M
470
1.5K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R664
R666
R667
R668
R669
1-216-295-91
1-216-295-91
1-216-037-00
1-216-025-91
1-216-025-91
SHORT
SHORT
METAL CHIP
RES-CHIP
RES-CHIP
0
0
330
100
100
5%
5%
5%
1/10W
1/10W
1/10W
R670
R671
R672
1-216-022-00 METAL CHIP
75
5%
1/10W
(SE250,SE300,SE450B/D/P,SX250D)
1-216-022-00 METAL CHIP
75
5%
1/10W
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
1-216-041-00 METAL CHIP
470
5%
1/10W
(SE250,SE300,SE450B/D/P,SX250D)
1-216-041-00 METAL CHIP
470
5%
1/10W
(SE250,SE300,SE450B/D/P,SX250D)
1-216-041-00 METAL CHIP
470
5%
1/10W
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
Remarks
1-216-097-91 RES-CHIP
100K
5%
1/10W
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
1-216-049-91 RES-CHIP
1K
5%
1/10W
1-216-065-91 RES-CHIP
4.7K
5%
1/10W
1-216-073-00 METAL CHIP
10K
5%
1/10W
(SE250,SE300,SE450B/D/P,SX250D)
1-216-073-00 METAL CHIP
10K
5%
1/10W
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
R673
R702
1-216-041-00 METAL CHIP
470
5%
1/10W
1-216-295-91 SHORT
0
1-216-049-91 RES-CHIP
1K
5%
1/10W
(SE100K,SE250B,SE400K,SE450B/K,SX100K)
1-216-073-00 METAL CHIP
10K
5%
1/10W
1-216-295-91 SHORT
0
R704
R705
R711
R713
R714
1-216-041-00
1-216-041-00
1-212-895-00
1-216-025-91
1-216-113-00
METAL CHIP
METAL CHIP
FUSIBLE
RES-CHIP
METAL CHIP
R723
R724
R725
R726
R731
1-216-097-91
1-216-061-00
1-216-081-00
1-216-097-91
1-216-041-00
RES-CHIP
METAL CHIP
METAL CHIP
RES-CHIP
METAL CHIP
R590
1-216-073-00 METAL CHIP
10K
5%
1/10W
(SE250,SE300,SE450B/D/P,SX250D)
1-216-097-91 RES-CHIP
100K
5%
1/10W
(SE250,SE300,SE450B/D/P,SX250D)
1-216-097-91 RES-CHIP
100K
5%
1/10W
(SE250,SE300D1/D2,SE450B/D/P,SX250D)
1-216-097-91 RES-CHIP
100K
5%
1/10W
(SE250,SE300,SE450B/D/P,SX250D)
1-216-049-91 RES-CHIP
1K
5%
1/10W
R733
R593
1-216-097-91 RES-CHIP
R594
1-216-073-00
R595
1-216-057-00
R596
1-216-077-91
R600
1-249-417-11
100K
5%
1/10W
(SE250,SE300,SE450B/D/P,SX250D)
METAL CHIP
10K
5%
1/10W
(SE250,SE300,SE450B/D/P,SX250D)
METAL CHIP
2.2K
5%
1/10W
(SE250,SE300,SE450B/D/P,SX250D)
RES-CHIP
15K
5%
1/10W
(SE250,SE300,SE450B/D/P,SX250D)
CARBON
1K
5%
1/4W F
1-216-041-00 METAL CHIP
470
5%
1/10W
(SE100,SE200I/V1/V2,SE250,SE300D1/D2,
SE400K,SE450,SX100K,SX250D)
1-216-025-91 RES-CHIP
100
5%
1/10W
1-216-025-91 RES-CHIP
100
5%
1/10W
1-216-073-00 METAL CHIP
10K
5%
1/10W
1-216-049-91 RES-CHIP
1K
5%
1/10W
R601
R602
R603
R604
R605
1-249-417-11
1-216-089-91
1-216-452-11
1-216-065-91
1-216-065-91
CARBON
RES-CHIP
METAL OXIDE
RES-CHIP
RES-CHIP
1K
47K
180
4.7K
4.7K
5%
5%
5%
5%
5%
1/4W F
1/10W
2W
1/10W
1/10W
R606
R607
R608
R609
R610
1-216-069-00
1-216-053-00
1-249-414-11
1-247-815-91
1-247-815-91
METAL CHIP
METAL CHIP
CARBON
CARBON
CARBON
6.8K
1.5K
560
220
220
5%
5%
5%
5%
5%
1/10W
1/10W
1/4W F
1/4W
1/4W
R611
1-216-049-91 RES-CHIP
R613
R614
R615
1-215-907-11
1-215-857-11
1-216-047-91
R617
1-216-049-91
R572
R574
R580
R581
R582
R583
R584
R585
R586
R587
R754
R755
R756
R757
R800
R801
R802
R803
R804
R805
R806
R807
1K
5%
1/10W
(SE250,SE300,SE450B/D/P,SX250D)
METAL OXIDE
22
5%
3W
METAL OXIDE
10
5%
1W
RES-CHIP
820
5%
1/10W
(SE250,SE300,SE450B/D/P,SX250D)
RES-CHIP
1K
5%
1/10W
7-14
R813
R850
470
470
390
100
470K
5%
5%
5%
5%
5%
1/10W
1/10W
1/4W
1/10W
1/10W
100K
5%
1/10W
3.3K
5%
1/10W
22K
5%
1/10W
100K
5%
1/10W
470
5%
1/10W
(SE100A1/A2,SE200I/V1/V2,SE250,
SE300D1/D2,SE450B/D/P,SX250D)
1-216-101-00 METAL CHIP
150K
5%
1/10W
(SE200,SE250,SE300,SE450,SX250D)
1-216-073-00 METAL CHIP
10K
5%
1/10W
(SE200,SE250,SE300,SE450,SX250D)
1-216-073-00 METAL CHIP
10K
5%
1/10W
(SE200,SE250,SE300,SE450,SX250D)
1-216-081-00 METAL CHIP
22K
5%
1/10W
(SE200,SE250,SE300,SE450,SX250D)
1-216-073-00 METAL CHIP
10K
5%
1/10W
(SE200,SE250,SE300,SE450,SX250D)
1-216-073-00 METAL CHIP
10K
5%
1/10W
(SE200,SE250,SE300,SE450,SX250D)
1-216-073-00 METAL CHIP
10K
5%
1/10W
(SE200,SE250,SE300,SE450,SX250D)
1-216-085-00 METAL CHIP
33K
5%
1/10W
(SE200,SE250,SE300,SE450,SX250D)
1-216-073-00 METAL CHIP
10K
5%
1/10W
(SE200,SE250,SE300,SE450,SX250D)
1-216-025-91 RES-CHIP
100
5%
1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
MA-372
Ref. No.
R851
R852
R853
R856
R857
R858
R859
R860
R861
R862
Remarks
Ref. No.
1-216-077-91 RES-CHIP
15K
5%
1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
1-216-081-00 METAL CHIP
22K
5%
1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
1-216-049-91 RES-CHIP
1K
5%
1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
1-216-097-91 RES-CHIP
100K
5%
1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
1-216-069-00 METAL CHIP
6.8K
5%
1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
Part No.
Description
R990
R993
1-216-295-91 SHORT
1-216-071-00 METAL CHIP
R994
1-216-689-11 METAL CHIP
R995
1-216-073-00 METAL CHIP
R996
1-216-689-11 METAL CHIP
R997
1-216-073-00 METAL CHIP
R998
1-216-073-00 METAL CHIP
R999
1-216-295-91 SHORT
1-216-069-00 METAL CHIP
6.8K
5%
1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
1-216-123-11 METAL CHIP
1.2M
5%
1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
1-216-123-11 METAL CHIP
1.2M
5%
1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
1-216-117-00 METAL CHIP
680K
5%
1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
1-216-057-00 METAL CHIP
2.2K
5%
1/10W
(SE200,SE250B/D,SE300,SE450B/D/K,SX250D)
R968
1-216-101-00 METAL CHIP
150K
R969
1-216-069-00 METAL CHIP
6.8K
R970
1-216-085-00 METAL CHIP
33K
R971
1-216-085-00 METAL CHIP
33K
R972
1-216-083-00 METAL CHIP
27K
R973
1-216-105-91 RES-CHIP
220K
R974
1-216-081-00 METAL CHIP
22K
R975
1-216-295-91 SHORT
0
R976
1-216-059-00 METAL CHIP
2.7K
R977
1-216-089-91 RES-CHIP
47K
R978
1-216-071-00 METAL CHIP
8.2K
R979
1-216-073-00 METAL CHIP
10K
R980
1-216-097-91 RES-CHIP
100K
R981
1-216-083-00 METAL CHIP
27K
R982
1-216-089-91 RES-CHIP
47K
R983
1-216-067-00 METAL CHIP
5.6K
R985
1-216-041-00 METAL CHIP
470
R986
1-216-089-91 RES-CHIP
47K
R988
1-216-073-00 METAL CHIP
10K
R989
1-216-049-91 RES-CHIP
1K
Part No.
Description
Remarks
0 (SE250B,SE450B)
8.2K
5%
1/10W
(SE250B,SE450B)
39K
0.5% 1/10W
(SE250B,SE450B)
10K
5%
1/10W
(SE250B,SE450B)
39K
0.5% 1/10W
(SE250B,SE450B)
10K
5%
1/10W
(SE250B,SE450B)
10K
5%
1/10W
(SE250B,SE450B)
0 (SE250B,SE450B)
< SWITCH >
S100
S101
S460
1-771-155-11 SWITCH, ROTARY
1-571-958-11 SWITCH, PUSH (1 KEY)
1-771-410-21 SWITCH, TACT
(SE100,SE200,SE250,SE400K,SE450,SX100K,SX250D)
1-771-410-21 SWITCH, TACT
(SE100,SE200,SE250,SE400K,SE450,SX100K,SX250D)
1-771-410-21 SWITCH, TACT
5%
1/10W
(SE250B,SE450B)
5%
1/10W
(SE250B,SE450B)
5%
1/10W
(SE250B,SE450B)
5%
1/10W
(SE250B,SE450B)
5%
1/10W
(SE250B,SE450B)
S461
S470
S471
1-771-410-21 SWITCH, TACT
1-771-410-21 SWITCH, TACT
1-571-588-11 SWITCH, SLIDE
(SE100K,SE200,SE250,SE300,SE400K,SE450,SX100K,SX250D)
1-771-410-21 SWITCH, TACT
1-771-410-21 SWITCH, TACT
5%
1/10W
(SE250B,SE450B)
5%
1/10W
(SE250B,SE450B)
S473
S474
S476
S477
S478
1-771-410-21
1-771-410-21
1-771-410-21
1-771-410-21
1-771-410-21
S462
S463
S464
S467
(SE250B,SE450B)
5%
1/10W
(SE250B,SE450B)
5%
1/10W
(SE250B,SE450B)
SWITCH, TACT
SWITCH, TACT
SWITCH, TACT
SWITCH, TACT
SWITCH, TACT
(SE300)
< TRANSFORMER >
T380
1-433-479-11 TRANSFORMER, BIAS OSCILLATION
< TUNER >
5%
1/10W
(SE250B,SE450B)
5%
1/10W
(SE250B,SE450B)
5%
1/10W
(SE250B,SE450B)
5%
1/10W
(SE250B,SE450B)
5%
1/10W
(SE250B,SE450B)
5%
1/10W
(SE250B,SE450B)
5%
1/10W
(SE250B,SE450B)
5%
1/10W
(SE250B,SE450B)
5%
1/10W
(SE250B,SE450B)
5%
1/10W
(SE250B,SE450B)
TU700
TU700
TU700
TU701
1-693-435-41 TUNER, IF (BTF-3MC445) (SE250B,SE450B)
1-693-433-51 TUNER, IF (BTF-3MC404)
(SE200V1/V2/I,SE250D/P,SE30OD1/D2,SE450D/P,SX250D)
1-693-432-11 TUNER, IF (BTF-2MU601) (SE200G,SE300G)
1-693-480-11 TUNER, IF (BTF-2MC422)
(SE100A1/A2/K,SE200V1/V2,SE400K,SE450K,SX100K)
< VIBRATOR >
X160
1-579-463-11 VIBRATOR, CRYSTAL (32.768kHz)
X161
1-781-717-21 VIBRATOR, CRYSTAL (17.734MHz)
X200
1-579-608-21 VIBRATOR, CRYSTAL (4.433MHz)
************************************************************
7-15
POWER BLOCK
Ref. No.
Part No.
0
1-468-459-11 POWER BLOCK
************
Description
Remarks
Ref. No.
Part No.
Description
Remarks
< COIL >
(Ref.No.:1,000 Series)
< CAPACITOR >
0 C001
0 C002
C003
0 C004
0 C005
9-885-001-95
9-885-001-96
9-885-001-97
9-885-001-98
9-885-001-98
PLASTIC FILM CAPACITOR
PLASTIC FILM CAPACITOR
ELECTROLYTIC CAPACITOR
CERAMIC CAPACITOR
CERAMIC CAPACITOR
0 C006
0 C007
C102
C103
C104
9-885-001-99
9-885-001-99
1-126-964-91
9-885-002-00
9-885-002-01
CERAMIC CAPACITOR
470pF
CERAMIC CAPACITOR
470pF
ELECTROLYTIC CAPACITOR 10uF
CERAMIC CAPACITOR
470pF
PLASTIC FILM CAPACITOR 1.5nF 5%
250V
250V
50V
50V
50V
C105
C106
C107
C201
C301
9-885-002-02
9-885-002-03
1-128-965-91
1-126-968-91
9-880-907-01
PLASTIC FILM CAPACITOR 220nF
PLASTIC FILM CAPACITOR 100nH
ELECTROLYTIC CAPACITOR 22uF
ELECTROLYTIC CAPACITOR 100uF
ELECTROLYTIC CAPACITOR 820uF
63V
83V
50V
50V
25V
C302
C303
C401
C402
C403
1-126-968-91
9-885-002-04
9-880-908-01
1-126-925-91
9-885-002-04
ELECTROLYTIC CAPACITOR
PLASTIC FILM CAPACITOR
ELECTROLYTIC CAPACITOR
ELECTROLYTIC CAPACITOR
PLASTIC FILM CAPACITOR
100uF
10nF
820uF
470uF
10nF
50V
83V
16V
10V
83V
C501
C601
1-126-960-91 ELECTROLYTIC CAPACITOR 1uF
9-880-909-01 ELECTROLYTIC CAPACITOR 330uF
50V
25V
0.047uF
0.1uF
47uF
3300pF
3300pF
250V
250V
400V
250V
250V
0 L001
0 L002
L101
L201
L301
L302
L401
9-885-002-10
9-885-002-11
9-885-002-12
9-885-002-12
9-885-002-13
LINE FILTER
60uH
LINE FILTER
26mH
FERRITE BEAD INDUCTOR
FERRITE BEAD INDUCTOR
CHOKE
3.3uH
3.0A
0.4A
2.2A
9-885-002-12 FERRITE BEAD INDUCTOR
9-885-001-13 CHOKE
3.3uH
2.2A
< ISOLATOR >
0 PC101
9-880-921-01 OPTOISOLATOR
< TRANSISTOR >
0 Q101
Q102
9-880-922-01 POWER FET
9-885-002-14 TRANSISTOR
< RESISTOR >
0 R001
R101
R102
R103
R104
9-885-002-15
1-247-882-91
1-247-882-91
1-247-882-91
1-247-882-91
CARBON FILM RESISTOR
CARBON FILM RESISTOR
CARBON FILM RESISTOR
CARBON FILM RESISTOR
CARBON FILM RESISTOR
2M
130K
130K
130K
130K
0.5W
0.25W
0.25W
0.25W
0.25W
R105
R107
R110
R111
R112
9-885-002-16
9-885-002-17
1-214-761-11
1-247-855-91
1-247-831-91
METAL FILM RESISTOR
METAL FILM RESISTOR
METAL FILM RESISTOR 22K
CARBON FILM RESISTOR
CARBON FILM RESISTOR
4.7
0.75
1%
10K
1K
0.5W
0.5W
0.25W
0.25W
0.25W
< DIODE >
R113
R201
R218
R301
R501
1-247-807-91
1-247-879-91
1-247-839-91
1-247-829-91
1-214-729-11
CARBON FILM RESISTOR
CARBON FILM RESISTOR
CARBON FILM RESISTOR
CARBON FILM RESISTOR
METAL FILM RESISTOR 1K
100
100
2.2K
820
1%
0.25W
0.25W
0.25W
0.25W
0.25W
R502
R503
R504
R505
R601
9-885-002-18
1-247-799-91
1-247-851-91
1-247-837-91
1-247-879-91
METAL FILM RESISTOR 1.4K
CARBON FILM RESISTOR
CARBON FILM RESISTOR
CARBON FILM RESISTOR
CARBON FILM RESISTOR
1%
47
6.8K
1.8K
100K
0.25W
0.25W
0.25W
0.25W
0.25W
750V
D=10
< CONNECTOR >
CN001
CN101
1-580-230-11 CONNECTOR
1-784-642-11 CONNECTOR
D001
D002
D003
D004
D101
9-885-002-05
9-885-002-05
9-885-002-05
9-885-002-05
9-885-002-06
DIODE
DIODE
DIODE
DIODE
DIODE
D102
D103
D104
D201
D301
9-885-002-07
9-885-002-05
9-885-002-06
9-885-002-05
9-880-915-01
DIODE
DIODE
DIODE
DIODE
DIODE
D401
D601
9-885-002-08 DIODE
9-885-002-07 DIODE
2P
11 P
< TRANSFORMER >
0 T101
9-885-002-19 SWITCHING TRANSFORMER
< VARISTOR >
0 Z001
9-880-923-01 METALOXID-VARISTOR
< ZENER DIODE >
< FUSE >
0 F001
9-884-454-01 FUSE
< IC >
IC101
IC501
2A/250V
ZD101 9-880-924-01 ZENER DIODE
0.4W
5.1V
ZD102 9-885-002-20 ZENER DIODE
0.4W
27V
ZD103 9-880-926-01 VOLTAGE SUPRESSOR 600W 350V
************************************************************
9-885-002-09 IC uC3844A
9-880-920-01 IC KA431AETA
Note :
7-16
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
Ref. No.
Part No.
Description
Remarks
MISCELLANEOUS
*************
0 19
53
54
0 56
704
832
M901
M901
M901
M902
1-777-854-21
1-792-019-11
1-792-018-11
1-468-459-11
1-500-144-11
CORD, POWER
CABLE, FLAT (FFM-36)
CABLE, FLAT (FAC-8)
POWER BLOCK
HEAD, FE
1-766-723-21 CONNECTOR, BOARD TO BOARD 3P
1-774-359-11 DRUM ASSY, DZH-78E-R
(SE100V1/V2/K,SE200V1/V2,SE250B,SX100K)
1-774-361-11 DRUM ASSY, DZH-92D-R
(SE200G/I,SE250D/P,SE300D1/D2/G,SX250D)
1-774-362-11 DRUM ASSY, DZH-93D-R
(SE400K,SE450B/D/K/P)
1-698-971-11 MOTOR, DC (CAPSTAN)
Ref. No.
Part No.
Description
Remarks
3-868-344-31 MANUAL, INSTRUCTION (POLISH)
(SE100K,SE400K,SE450K,SX100K)
3-868-344-41 MANUAL, INSTRUCTION (HUNGARIAN)
(SE100K,SE400K,SE450K,SX100K)
3-868-344-51 MANUAL, INSTRUCTION (RUSSIAN)
(SE100K,SE400K)
3-868-345-11 MANUAL, INSTRUCTION (ENGLISH)
(SE200G/I,SE300G)
3-868-346-11 MANUAL, INSTRUCTION (FRENCH)
(SE250B,SE450B)
************************************************************
M903
1-541-309-11 MOTOR, L (RF-370C) (LOADING)
************************************************************
**************
HARDWARE LIST
**************
#1
#701
#702
#703
7-685-648-79
7-685-646-79
7-682-147-01
7-685-133-19
SCREW +BVTP 3X12 TYPE2
SCREW +BVTP 3X8 TYPE2 IT-3
SCREW +P 3X6
SCREW (DIA. 2.6) (IT3B)
ACCESSORIES & PACKING MATERIALS
*******************************
1-418-008-11 COMMANDER, STANDARD (RMT-V257)
(SE100A1/A2/K,SE200V1/V2,SX100K)
1-418-008-21 COMMANDER, STANDARD(RMT-V257A)
(SE250B)
1-418-008-31 COMMANDER, STANDARD(RMT-V257B)
(SE200G/I/D/P,SE450D/P/K,SX250D)
1-418-008-41 COMMANDER, STANDARD(RMT-V257C)
(SE450B)
1-418-781-11 COMMANDER, STANDARD (RMT-V287)
(SE300D1/D2/G)
0
1-696-593-11 CORD, CONNECTION (PAL)
1-770-019-11 ADAPTOR, CONVERSION PLUG 3P
(SE200G/I,SE300G)
3-709-433-01 COVER, REMOTE CONTROL BATTERY
(FOR RMT-V257,V257A,V257B,V257C,V287)
3-868-342-11 MANUAL, INSTRUCTION (FRENCH)
(SE100A1,SE100V1,SE200D,SE300D1,SE450D)
3-868-342-21 MANUAL, INSTRUCTION (SPANISH)
(SE100A2,SE250P,SE300D2,SE450P,SX250D)
3-868-342-31 MANUAL, INSTRUCTION (GERMAN)
(SE100A1,SE200V1,SE250D,SE300D1,SE450D,SX250D)
3-868-342-41 MANUAL, INSTRUCTION (ITALIAN)
(SE100A,SE200V1,SE250D,SE300D1,SE450D/P)
3-868-342-51 MANUAL, INSTRUCTION (DUTCH)
(SE100A1,SE200V1,SE300D1,SE450D)
3-868-342-61 MANUAL, INSTRUCTION (PORTUGUESE)
(SE100A1,SE300D2,SE450D)
3-868-342-71 MANUAL, INSTRUCTION (GREEK)
(SE100A1,SE200V2,SE450P)
3-868-343-11 MANUAL, INSTRUCTION (SWEDISH)
(SE100A1,SE200V2,SE300D2,SX250D)
3-868-343-21 MANUAL, INSTRUCTION (DANISH)
(SE100A2,SE200V2,SE300D2,SX250D)
3-868-343-31 MANUAL, INSTRUCTION (FINNISH)
(SE100A2,SE200V2,SE300D2,SX250D)
3-868-344-11 MANUAL, INSTRUCTION (ENGLISH)
(SE100K,SE400K,SE450K,SX100K)
3-868-344-21 MANUAL, INSTRUCTION (CZECH)
(SE100K,SE400K,SE450K,SX100K)
Note :
7-17
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
MEMO
7-18E
SLV-SE100/SE200/SE250/SE300/SE400/SE450/SX100/SX250
Sony Corporation
9-921-750-11
Home Video Division Company
— 104 —
2000B167561-1
Printed in Hungary ©2000.2
Published by Quality Assurance Dept.