Download Operating Instructions

D:\SONY TV\SY140117_Clover 55 (Rev-3)\4533567E31_US\US03STU.fm
1: Attaching the
Table-Top Stand
XBR-65X90xB
x Recommended (edge position)
(XBR-65X90xB only)
Refer to the supplied Table-Top Stand
leaflet for proper attachment.
• Ensure your TV has adequate ventilation,
see page 40.
• For best picture quality, do not expose
the screen to direct illumination or
sunlight.
• Avoid installing the TV in a room with
reflective wall and floor materials.
• Avoid moving the TV from a cold area to
a warm area. Sudden room temperature
changes may cause moisture
condensation. This may cause the TV to
show poor picture and/or poor color.
Should this occur, allow moisture to
evaporate completely before powering
the TV on.
• Ensure that there are no objects in front
of the TV.
~
• Do not put stress on the LCD panel or the
frame around the screen.
• Be careful to not pinch your hands or the AC
power cord when you install the TV set to the
Table-Top Stand.
• Two or more people (four or more people for
XBR-79X90xB) are needed to carry out this
installation.
1
Remove the cushion of the right side 1,
and attach the Table-Top Stand to the
TV 2.


IR Sensor
3D Sync
Transmitter
(XBR-65X90xB
only)
2
Repeat step 1 for the left side.


10
XBR-79X907B/79X905B/65X907B/65X905B
4-533-567-E3(1)