Download Quick Start Setup Guide – PG&E

Quick Start Setup Guide – PG&E
Visit aztechIHD.com for product User and Configuration Manuals
Step 1: Power up your In-Home Display (IHD)
Plug the power adaptor into a 120 V AC wall outlet and press the middle button to turn on. Your IHD can also operate your IHD on batteries so that you can take the display throughout your home and explore how the use of different appliances impacts your energy use. Charge the IHD batteries overnight before first use. Select Scroll Power on
Step 2: Select Language for IHD text
 Select language using the up ▲button to scroll through options.  Press the center √ button to select the desired language. (This selection only impacts labels on the information screens and menus. This selection does not translate messages sent by the utility via the Smart meter). Step 3: Join your IHD to your meter  Log into your PG&E My Energy account at http://www.pge.com/myenergy.  On the bottom of the Overview page, select Home and Business Area Network.  Register and Join your Aztech In‐Home Display. During the pairing process,  “Acquiring Signal” will be displayed and  the light bar will glow red, sweeping back and forth. When the meter connection is found,  the information screens will become available for viewing and the IHD will begin receiving information from the Smart meter. If no connection is found within 5 minutes,  verify that the Acquiring Signal message is being displayed  (if you have not selected a language, repeat step 2) and  move the IHD closer to the meter. If no connection is found after moving closer to your meter,  please contact your utility to confirm that your IHD has been registered and that the utility is ready to join your IHD with the meter. For further product or warranty assistance, please visit aztechIHD.com or email our service and support team at [email protected]. Copyright © 2014 by Aztech Associates, Inc. All rights reserved. No part of this guide may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of Aztech Associates Inc.
Step 4: IHD Operation
D 097‐0600 H02 aztechIHD.com This Product is protected under the following patents: US Patent 8325057, China Patent 101765758, Japan Patent 5026530 and New Zealand Patent 59331. Other patents pending. This Product is licensed under the Wireless Network Patent Portfolio, for use by a consumer or other users for which there is no remuneration. Any other users of this Product in any manner is not licensed and is expressly prohibited without a license under applicable patents in the Wireless Network Patent Portfolio, which license is available from MPEG LA, LLC, 4600 S. Ulster ST., Suite 400, Denver, Colorado 80237 U.S.A. See www.mpegla.com