Download 1 - Full Compass

2 If LATIN AMERICA is selected:
PAL&PAL-N area
SDI 1
SDI 2
HDMI COMPOSITE
F1
F2
F3
F4
F5
F6
F7
RETURN
L A T I N AMER I CA
PA L &PA L - N_ AREA
ARGEN T I NA
P ARAGUA Y
URUGUA Y
NTSC&PA L - M AREA
OTHER AREA
MENU
Argentina
Paraguay
Uruguay
NTSC&PAL-M area
Other area
RETURN
MENU
2~3
1
4 If ASIA EXCEPT JAPAN is selected:
Customers who will use this unit in the shaded
areas shown in the map below should select NTSC
AREA.
Other customers should select PAL AREA.
1
Press the 1 (standby) switch.
The unit is turned on and the SELECT SETTING
screen appears.
1 North America
S E L EC T S E T T I NG
NOR T H _ AMER I CA
L A T I N AMER I CA
A F R I C A A U S T R A L A S I AE
AS I A EXCEPT J APAN
J APAN
2 Latin America
3 Africa, Australia/New
Zealand, Europe,
Middle East, Russia
4 Asia Except Japan
5 Japan
2
Turn the menu selection control to select the area
where you intend to use the unit and press the menu
selection control.
If you select either 1, 3 or 5
The confirmation screen is displayed. Confirm the
selected area. When the setting is wrong, press the
RETURN button to return to the previous screen.
SELECT THIS AREA?
NORTH AMERICA
[ E NT E R ]Y E S
[ R E T U R N ] NO
AS I A EXCEPT
NTSC_ AREA
PAL
3
J APAN
NTSC area
AREA
PAL area
Press the menu selection control.
The SELECT SETTING screen disappears and the
menu item settings suitable for the selected area are
applied.
Note
If you select either 2 or 4
One of the following screens appears. Turn the
menu selection control to narrow the area further
and then press the menu selection control.
The confirmation screen is displayed. Confirm the
selected area.
If the setting is wrong, press the RETURN button to
return to the previous screen.
When you have selected the wrong area, set the
following items using the menu.
• COLOR TEMP (on page 24)
• NTSC SETUP (on page 25)
• COLOR SPACE (on page 24)
See “The default setting values for each area” (page 18)
on the setting value.
Selecting the Default Settings
19