Download VX-11d - Runco

Operation
Information ➤
Information
Signal
System
Signal / System: Select Information from the Main Menu, then choose either Signal or
System to display information about the current input signal (resolution, frequency, type et
cetera) and installed firmware versions, as well as other information that uniquely identifies
your DHD Controller and display device.
Should you ever need to contact Runco Technical Support, this information will help them
answer your questions or resolve product performance issues.
Network
Field Service
Manufacturing
MAC Address
1A:2B:3C:4D:5E:6F
IP Address
192.168.0.150
Subnet Mask
255.255.0.0
Default Gateway 192.168.1.1
Enabled
Model
DHD4
1080p/60
Display Name
VX-11d
Input Resolution
1920x1080
Output Resolution
1920x1080
Vertical Freq
59.94 Hz
Horizontal Freq
67.500 kHz
Pixel Clock
148.500 MHz
Color Space
REC709
Sync Type
Separate
Memory Preset
ISF Night
Y
HDMI 1
Signal Format
Serial Number
00000000
Boot Version
4.0
Firmware Version
4.0
Micro Version
4.0
Network: Select Information from the Main Menu, then choose Network to display
information about the Ethernet network connection.
To enable network communication via Ethernet, refer to IP Configuration on page 75.
Field Service / Manufacturing: The Field Service and Manufacturing menus are
password-protected and intended for use only by Runco service personnel and factory
technicians.
PR
Network Status Connected
Input Source
EL
IM
IN
A
R
Network
DHCP
System
Signal
64
Runco VX-11d Installation/Operation Manual