Download micromot - Farnell

MICROMOT
System
High strength precision die cast aluminium,
with machined guides, fittings and work table.
The Mill/Drill unit BFB 2000, with tilting headstock and 140mm throat depth.
With scale
Head feed adjustable
to fine feed by
means of lever.
Head with precision milled dovetail slide and may be tilted through 90°
to give all-round versatility: diagonal drilling, versatile without need of
special milling bits, milling diagonal slots.
Fine feed selectable, allowing fine head feed for milling. With dial and
depth scale. Geared rack and pinion feed for effortless drilling with 65mm
stroke. 45mm diameter drill column, 500mm long. Approx. 140mm
throat. Machined, solid base plate approx. 200 x 200mm. All drills with
standard 43mm spindle collars may be utilised directly: BOSCH, AEG,
FEIN, METABO, KRESS, BLACK & DECKER, SKIL. Approx. weight 6.5kg.
No 20 000
Horizontal application
Head may be tilted
through 90°.
e.g. for slot
milling.
Adjustable zero
position for fine feed.
Milled, adjustable
dovetail slide.
Selectable
fine feed
with lever.
High speed steel end mills. Suitable for drill
and mill system BFW 40/E
1 each of 2, 3, 4 and 5mm. All with
6mm shaft to fit collet in BFW 40/E.
Double flute to German industrial standard
DIN 327. Supplied in wooden box.
Clear, easily
legible depth
scale.
No 24 610
Milled multi-step clamp set
Set includes 2 stepped blocks, 2
clamp blocks, 2 studs, 2 special
nuts for use in T-slots and 2
nuts. Fits compound table KT
150 (illustrated), miller FF 400
and milling machine PF 400.
Accepts workpieces up to
approx. 35mm thick.
45mm diameter
column, 500mm long.
Stable, machined
work top
with T-slots.
No 24 257
Additional accessories are depicted on page 45!
51