Download Manual

■ 14 Further information
Then proceed as follows:
• Switch to „bALAncE” with the «MODE»-key.
• Press «0/T» until „CAL” appears.
CAL
- - 0000
9
• The balance carries out a Zero measurement
(- - 0000 g is shown flashing).
--
232
9
--
232
9
• After the zero measurement the display
flashes with the previously entered calibration
weight.
• Place the calibration weight on the pan.
• The display flashes rapidly.
9
• Calibration is complete when the display stops
flashing (the exact weight is shown).
+
60
232