Download XS Configuration Manual
Transcript
EVS Broadcast Equipment S.A. - July 2012 Issue 11.00.D GPIs OUT - Pulse duration Description Defines the pulse duration (number of seconds and/or frames) for pulse type output lines. Values • 00s00fr to 02s00fr (2fr steps) • Disable Default value 3.7.3. Disable Tally Settings Introduction The Tally settings allow specifying the settings related to the tally feature. This feature allows the user to automatically create a clip for each change of camera performed with the Director’s Cut and to add these clips to a playlist. The clips are created automatically by the server as it receives GPIs IN signals from a switcher when the director changes the camera angle. These fields are available in the following interfaces: • in the Multicam Configuration window, GPI tab. • in the Technical menu of the Remote Control Panel (T6.X). The following screenshot presents the settings page of the Monitoring tab in the serverbased application and highlights the Tally settings area. 164 3. Multicam Configuration