Download OPERATORLS MANUAL

7
Service
Headlight Bulbs
Fuses
1.
Raise hood to get access to the headlight assembly.
1.
2.
Turn the bulb/socket assembly approximately a quarter
turn counterclockwise to align its tabs with the notches of
the reflector, then remove from the reflector. See Fig. 7-1.
Unlatch and lift hood forward to get access to under the
dash panel.
2.
Remove fuse holder cover. See Fig. 7-2.
Figure 7-2
Figure 7-1
18
3.
Unplug the wire harness from the bulb/socket assembly.
4.
Plug the new bulb/socket assembly into the wire harness.
5.
Align the tabs of the new bulb/socket assembly with the
notches of the reflector and insert the bulb. Turn the bulb/
socket assembly clockwise to lock in place.
6.
Lower and secure hood.
3.
Remove the appropriate electrical fuse and replace with
proper amperage fuse.
4.
Lower and secure hood.