Download Digital Servo Amplifier

Copley Virtual Machine (CVM)
The CVM is a program area that stores and runs CVM
Programs. The Standard CVM Program is used by the
Copley 7xx8 Amplifier to perform the homing function. If a
sequence is selected, in a particular preset (see figure 543), the CVM program will run the selected function after
the preset is loaded.
Figure 5-43 CVM Sequence selection
When the CVM program is running, the program counter
and CVM status can be viewed on the Amplifier Status
Now! screen. To stop a CVM program while it is running
press the Stop button (see figure 5-44).
Figure 5-44 CVM monitor
5-58
Using Copley Motion Explorer