Download AXIS Q7411 Video Encoder, Installation Guide

Transcript
AXIS Q7411 Installation Guide
Page 5
AXIS Q7411 Video Encoder
Installation Guide
This installation guide provides instructions for installing a AXIS Q7411 Video Encoder on your
network. For all other aspects of using the product, please see the product User Manual, available
from www.axis.com
Follow these steps to install the AXIS Q7411 Video Encoder on your local network (LAN):
1.
2.
3.
4.
5.
Check the package contents against the list below.
Hardware overview. See page page 6.
Install the hardware. See page 7.
Access the video stream. See page 7.
Unit connectors. See page 8
Important!
This product must be used in
compliance with local laws and
regulations.
Package contents
Item
Models/variants/notes
Axis video encoder models
AXIS Q7411
Power adapter models
Type PS-K
Mounting kit
• 4 screws and plugs to mount the encoder to a concrete wall
• 4 surface protection pads
• Terminal block connectors (I/O: 6-pin connector, RS-485/422: 2x 2-pin
connector, Power: 2-pin connector)
CD
Installation and Management Software CD, including installation tools and
other software
Printed Materials
AXIS Q7411 Installation Guide (this document)
ENGLISH
Installation steps